What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

abm89 · 04-11-2020, 09:38 PM

Quote:

Originally Posted by Rusty

What is the thickness of the gaskets you're trying/

Measured 1/16th in.

Rusty · 04-11-2020, 09:48 PM

Quote:

Originally Posted by abm89

Measured 1/16th in.

Thinking that you might be better off with 1/8". If the ends of the flanges are touching and gapped in the center. Depending on the gap. The 1/8' should fill up that gap.

abm89 · 04-11-2020, 09:54 PM

Quote:

Originally Posted by Rusty

Thinking that you might be better off with 1/8". If the ends of the flanges are touching and gapped in the center. Depending on the gap. The 1/8' should fill up that gap.

I'll check it tomorrow morning. I feel like it should seal as i looked at my old invidia pipes and they are pretty flat themselves.

I still don't regret spending money on the other car now. I basically have an STi without the EJ problems lol.

Rusty · 04-11-2020, 10:01 PM

Quote:

Originally Posted by abm89

I'll check it tomorrow morning. I feel like it should seal as i looked at my old invidia pipes and they are pretty flat themselves.

I still don't regret spending money on the other car now. I basically have an STi without the EJ problems lol.

My gaskets from FI have never leaked. When you start your project. Check the flanges with a straight edge. Lay it on the flange from bolt hole to bolt hole. See how much gap there is under the straight edge in the center. If not too bad. you can hammer the flange flat again. A 12" scale (metal ruler) makes a good straight edge.

geeteezee · 04-11-2020, 10:25 PM

Base brakes upgraded with power stop calipers, stoptech slotted rotors, stoptech ss lines and yellow stuff pads. Definite improvement. Decals from etsy.

Rusty · 04-12-2020, 01:22 AM

Nice up grade.

But that is a 'bono caliper.

geeteezee · 04-12-2020, 08:19 AM

Quote:

Originally Posted by Rusty

Nice up grade.

But that is a 'bono caliper.

Indeed, but branded as PowerStop.

666Z34 · 04-12-2020, 01:35 PM

Quote:

Originally Posted by Neek

Paint corrected and ceramic coated the z the other week (video taken from detailers IG story).

Ughhh...(drool)

Sent from my iPhone using Tapatalk

gbrettin · 04-12-2020, 01:48 PM

Chopped some holes in my Z. Sawzall/Death wheel fabrication baby!

Sent from my SM-G975U using Tapatalk

sprint7 · 04-13-2020, 08:48 AM

What did I do with my Z today? Well, on Good Friday...

Family friend & student nurse, Alanah, was at the end of her hospital placement.

She put herself into isolation for 14 days to protect her family from bringing home the COVID-19 Coronavirus.

Low on supplies, she needed an express delivery. What better way...

abm89 · 04-13-2020, 09:06 AM

The weather was really nice yesterday with 85F and sunny. I checked the HFC flanges and those seem to be the ones giving me trouble, not the headers. I swapped in the graphite style gaskets that fuse the system together, and we'll see if that works better than the Metal ones. If not, I'll just get some LTH and say F all of that noise. (vbands for life).

Drove around the city and got some good mileage in, as well as getting some data logs from ECUtek to check the car. Next on the list is to replace the radiator hoses and do a coolant flush (preventative maintenance).

ZontheRocks · 04-13-2020, 10:33 AM

Hoping for an email from Seb today. Email sent early Friday PST, but that was Good Friday and led into Easter weekend. Possible to not get anything until Wednesday given the holiday and listed 24-48 hour turnaround. Looking forward to the improved performance.

“I wanna go fast, Pa!”

ZontheRocks · 04-13-2020, 03:45 PM

Sebastian sent me the canned tune this afternoon and I went ahead and loaded ‘er up. Smooth idle and a few quick logs, but will log more in the evening.

I can definitely tell the difference in throttle input and a noticeable power bump on the 2/3 shift. Good start!

I’m excited to play around some more this evening and learn more about the cars data parameters.

Now to save up for a damn oil cooler.... any part outs coming up?

BettyZ · 04-13-2020, 05:38 PM

Finished installing the CJM fuel hat, put all the plastics back in, went for a spin. E'erything works, 'uuuude!

Sent from my SM-G955U using Tapatalk

PapoZalsa · 04-13-2020, 09:16 PM

Installed during the past 2 days EVO-R Big "Z" Front & Rear black Emblem and the EVO-R CF door handles ...

04-11-2020, 10:25 PM	#4580 (permalink)
geeteezee Base Member Join Date: Jun 2019 Location: Ontario Posts: 191 Drives: 19 370z Heritage EAC Rep Power: 3360	Base brakes upgraded with power stop calipers, stoptech slotted rotors, stoptech ss lines and yellow stuff pads. Definite improvement. Decals from etsy. Hotrodz, Latt, abm89 and 7 others like this. __________________

04-12-2020, 01:22 AM	#4581 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,849 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Nice up grade. But that is a 'bono caliper. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-12-2020, 01:48 PM	#4584 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,235 Drives: Tricycle Rep Power: 542172	Chopped some holes in my Z. Sawzall/Death wheel fabrication baby! Sent from my SM-G975U using Tapatalk JARblue, Rusty, Hotrodz and 5 others like this.

04-13-2020, 08:48 AM	#4585 (permalink)
sprint7 Base Member Join Date: Oct 2009 Location: London Posts: 31 Drives: 2018 370Z NISMO Rep Power: 3370	Delivering supplies to healthcare worker in isolation What did I do with my Z today? Well, on Good Friday... Family friend & student nurse, Alanah, was at the end of her hospital placement. She put herself into isolation for 14 days to protect her family from bringing home the COVID-19 Coronavirus. Low on supplies, she needed an express delivery. What better way... God-Speed, Rusty, axmea? and 8 others like this.

04-13-2020, 09:06 AM	#4586 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,299 Drives: 11 370Z \| 24 EL450 Rep Power: 64763	The weather was really nice yesterday with 85F and sunny. I checked the HFC flanges and those seem to be the ones giving me trouble, not the headers. I swapped in the graphite style gaskets that fuse the system together, and we'll see if that works better than the Metal ones. If not, I'll just get some LTH and say F all of that noise. (vbands for life). Drove around the city and got some good mileage in, as well as getting some data logs from ECUtek to check the car. Next on the list is to replace the radiator hoses and do a coolant flush (preventative maintenance). God-Speed, JARblue, Rusty and 3 others like this. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

04-13-2020, 10:33 AM	#4587 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 933 Drives: 2016 Nissan PW 370Z Rep Power: 33079	Hoping for an email from Seb today. Email sent early Friday PST, but that was Good Friday and led into Easter weekend. Possible to not get anything until Wednesday given the holiday and listed 24-48 hour turnaround. Looking forward to the improved performance. “I wanna go fast, Pa!” Hotrodz likes this. __________________ '16 Pearl White Sport \| Stillen Gen. 3 \| Motordyne ART \| Motordyne Shockwave \| ZSpeed \| Powertrix \| EVO-R \| Aeroworkz \| Nismo \| Z1 \| EcuTek \| Tuned by Seb @ SpecialtyZ

04-13-2020, 03:45 PM	#4588 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 933 Drives: 2016 Nissan PW 370Z Rep Power: 33079	Sebastian sent me the canned tune this afternoon and I went ahead and loaded ‘er up. Smooth idle and a few quick logs, but will log more in the evening. I can definitely tell the difference in throttle input and a noticeable power bump on the 2/3 shift. Good start! I’m excited to play around some more this evening and learn more about the cars data parameters. Now to save up for a damn oil cooler.... any part outs coming up? Hotrodz, Memphis370Z, old guy and 1 others like this.

04-13-2020, 05:38 PM	#4589 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684370	Finished installing the CJM fuel hat, put all the plastics back in, went for a spin. E'erything works, 'uuuude! Sent from my SM-G955U using Tapatalk JARblue, Rusty, Hotrodz and 4 others like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

04-13-2020, 09:16 PM	#4590 (permalink)
PapoZalsa A True Z Fanatic Join Date: Nov 2009 Location: Not in Sunny Florida Posts: 6,358 Drives: 16 Nismo w/Tech Pack Rep Power: 4499	Installed during the past 2 days EVO-R Big "Z" Front & Rear black Emblem and the EVO-R CF door handles ... Hotrodz and old guy like this. __________________ 2009 370Z MB Base w/Sport Package 6MT Modshack's Custom Air Intakes /3M Clear Bra/ Illuminated Kick Plates / F. I CBE w/12" resonators / EVO-R Front Lip / Rear Hatch Wing / Tein S-Tech Springs /Ilegal Tint in the Rep. of VA/4x20mm Z1 Spacers/ Vinyl Roof/Liquid Carbon Designs

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM