What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

ct2012 · 03-11-2020, 07:28 PM

I defeated the demon bolts. The crack of them breaking loose was one of the sweetest sounds I will ever hear in my life.

Falconquey · 03-11-2020, 07:33 PM

Quote:

Originally Posted by ct2012

I defeated the demon bolts. The crack of them breaking loose was one of the sweetest sounds I will ever hear in my life.

DieselKrampus · 03-11-2020, 09:17 PM

Tried my first attempt at wrapping some interior pieces in some 3M carbon fiber vinyl that I had laying around... not a terrible first go at it, IMHO. Made a few small mistakes, mostly on the large inner ring section of the shifter surround, but they're mostly invisible once installed.

Sent from my SAMSUNG-SGH-I537 using Tapatalk

God-Speed · 03-12-2020, 04:11 AM

Quote:

Originally Posted by DieselKrampus

Tried my first attempt at wrapping some interior pieces in some 3M carbon fiber vinyl that I had laying around... not a terrible first go at it, IMHO. Made a few small mistakes, mostly on the large inner ring section of the shifter surround, but they're mostly invisible once installed.

Sent from my SAMSUNG-SGH-I537 using Tapatalk

Nice job, looks good.

abm89 · 03-12-2020, 10:04 AM

Definitely. Looks clean!

as for my Z, I gave it the clean bill of health after doing commuter duty for the last three days. No more SES light and the exhaust note is so refined and cleaned up with the HFCs. The AFRs look reasonable, It probably wont hurt to get a retune and touch up the fuel trims.

abm89 · 03-16-2020, 05:16 PM

Does anyone have a phone number for Visconti Tuning?

BettyZ · 03-16-2020, 07:31 PM

Quote:

Originally Posted by abm89

Does anyone have a phone number for Visconti Tuning?

1-800-CORANAL

Sent from my SM-G955U using Tapatalk

Memphis370Z · 03-16-2020, 07:31 PM

Quote:

Originally Posted by abm89

Does anyone have a phone number for Visconti Tuning?

PM sent.

sprint7 · 03-27-2020, 02:54 AM

More what I did with my Z on Saturday before the Coronavirus COVID-19 lockdown...

One last drive to see sights and supercars in London... And maybe a little tunnel run...

madwi · 03-27-2020, 04:14 AM

Buttoned up front end suspension and supporting pieces. Almost ready for spring time.

ZontheRocks · 03-27-2020, 09:01 AM

Installed a clutch helper spring this past weekend. Nice difference in clutch feel. Only took me 52K miles to try it out.

Also put in an order for a new Motordyne mid-muffler (The Box) for my Shockwave. The shitty JB-weld job I did to fix a crack on my original has been kaput for weeks (as was I was told it would!) and it was time to order the replacement.

That will give me another car thing to do while on lockdown.

abm89 · 03-27-2020, 10:22 AM

Quote:

Originally Posted by ZontheRocks

Installed a clutch helper spring this past weekend. Nice difference in clutch feel. Only took me 52K miles to try it out.

Also put in an order for a new Motordyne mid-muffler (The Box) for my Shockwave. The shitty JB-weld job I did to fix a crack on my original has been kaput for weeks (as was I was told it would!) and it was time to order the replacement.

That will give me another car thing to do while on lockdown.

DO you know if they ever put that RFL pipe in production (the substitute for the muffler)

ZontheRocks · 03-27-2020, 11:46 AM

Quote:

Originally Posted by abm89

DO you know if they ever put that RFL pipe in production (the substitute for the muffler)

Motordyne currently has three replacement options for the mid-muffler, all available on the Z1 website (I can't find them on Motordyne's direct site):

Motordyne Shockwave Resonated Muffler Delete Pipe

Motordyne Shockwave High Flow Resonated Muffler Delete Pipe

Motordyne Shockwave Muffler Delete Pipe

I almost picked up a used Resonated Muffler Delete (1st option I listed), but the price was the same for the replacement Box, so I just stuck with that. I feel like the sound of the original Box is more my style after hearing several sound clips that were posted on the FB groups (which can be found on YouTube).

abm89 · 03-27-2020, 12:03 PM

oh man, this made my day. I've had clearance issues with my new garage (ever so slightly.)

madwi · 03-27-2020, 06:10 PM

She got a little love today, some may say too much, I say just enough.

03-11-2020, 07:28 PM	#1 (permalink)
ct2012 Base Member Join Date: Sep 2016 Location: Central PA Posts: 43 Drives: 16 370Z Sport Rep Power: 9	I defeated the demon bolts. The crack of them breaking loose was one of the sweetest sounds I will ever hear in my life. __________________ Where all my money goes... EcuTek tuned \| Stillen G3 CAI \| GTR Start Button \| 3M 35% Tint \| Z1 Slotted/Drilled Rotors \| Z1 15/20mm Spacers \| FI Res HFCs \| FI Non-Res CBE #1967 \| Fairlady Badging

03-11-2020, 09:17 PM	#3 (permalink)
DieselKrampus Base Member Join Date: Feb 2020 Location: Chadds Ford, PA Posts: 81 Drives: 2010 Nismo370Z MB M6 Rep Power: 3361	Tried my first attempt at wrapping some interior pieces in some 3M carbon fiber vinyl that I had laying around... not a terrible first go at it, IMHO. Made a few small mistakes, mostly on the large inner ring section of the shifter surround, but they're mostly invisible once installed. Sent from my SAMSUNG-SGH-I537 using Tapatalk __________________ 2010 *Nismo* 370Z #574 . Z1 Post-MAF Tubes . Drop-in dry filters . Beluga Axleback . Z33 Shift knob

03-12-2020, 10:04 AM	#5 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64764	Definitely. Looks clean! as for my Z, I gave it the clean bill of health after doing commuter duty for the last three days. No more SES light and the exhaust note is so refined and cleaned up with the HFCs. The AFRs look reasonable, It probably wont hurt to get a retune and touch up the fuel trims. __________________ Complete Parts List: https://github.com/abm89/ztouge-build

03-16-2020, 05:16 PM	#6 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64764	Does anyone have a phone number for Visconti Tuning? __________________ Complete Parts List: https://github.com/abm89/ztouge-build

03-27-2020, 02:54 AM	#9 (permalink)
sprint7 Base Member Join Date: Oct 2009 Location: London Posts: 31 Drives: 2018 370Z NISMO Rep Power: 3371	Last Drive before the Lockdown More what I did with my Z on Saturday before the Coronavirus COVID-19 lockdown... One last drive to see sights and supercars in London... And maybe a little tunnel run...

03-27-2020, 04:14 AM	#10 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Buttoned up front end suspension and supporting pieces. Almost ready for spring time.

03-27-2020, 09:01 AM	#11 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 960 Drives: 2016 Nissan PW 370Z Rep Power: 34536	Installed a clutch helper spring this past weekend. Nice difference in clutch feel. Only took me 52K miles to try it out. Also put in an order for a new Motordyne mid-muffler (The Box) for my Shockwave. The shitty JB-weld job I did to fix a crack on my original has been kaput for weeks (as was I was told it would!) and it was time to order the replacement. That will give me another car thing to do while on lockdown. __________________ '16 Pearl White Sport \| Stillen Gen. 3 \| Motordyne ART \| Motordyne Shockwave \| ZSpeed \| Powertrix \| EVO-R \| Aeroworkz \| Nismo \| Z1 \| EcuTek \| Tuned by Seb @ SpecialtyZ

03-27-2020, 12:03 PM	#14 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64764	oh man, this made my day. I've had clearance issues with my new garage (ever so slightly.) __________________ Complete Parts List: https://github.com/abm89/ztouge-build

03-27-2020, 06:10 PM	#15 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	She got a little love today, some may say too much, I say just enough.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM