What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

Spooler · 04-22-2019, 07:27 PM

Quote:

Originally Posted by Memphis370Z

Thanks!

They feel awesome. It handled great with the Swifts, but there really is a night and day difference. Although, I've got to figure out a solution because the front tires are rubbing on the fender liner tabs upon compression. I definitely don't want to raise them, even a little. I think I remember seeing a thread on how to relocate the tabs, so I'll find that and give it a shot.

Can't wait to really try them out next month.

One Dremel cut off wheel, Gone!!!! Don't take it all just the raised part of the plastic. Make it the same contour of the fender liner.

OTW Z-Boy · 04-22-2019, 07:33 PM

Or just drive normally for a few hundred miles they’ll sort themselves out lol

Sent from my iPhone using Tapatalk

Sway · 04-22-2019, 07:52 PM

Put on my passwordJDM CF cooling plate today. It doesn’t cover that much more than stock so I’m not sure how effective that it will be, but it looks nice.

Memphis370Z · 04-22-2019, 08:01 PM

Quote:

Originally Posted by Spooler

One Dremel cut off wheel, Gone!!!! Don't take it all just the raised part of the plastic. Make it the same contour of the fender liner.

Plan A

Quote:

Originally Posted by OTW Z-Boy

Or just drive normally for a few hundred miles they’ll sort themselves out lol

Sent from my iPhone using Tapatalk

Plan B

madwi · 04-22-2019, 08:04 PM

Which coils did you get Memphis?

Rusty · 04-22-2019, 08:22 PM

Quote:

Originally Posted by Memphis370Z

Thanks!

They feel awesome. It handled great with the Swifts, but there really is a night and day difference. Although, I've got to figure out a solution because the front tires are rubbing on the fender liner tabs upon compression. I definitely don't want to raise them, even a little. I think I remember seeing a thread on how to relocate the tabs, so I'll find that and give it a shot.

Can't wait to really try them out next month.

Mine rub at stock height with the 275/35-19 tires. On the track. I'm using all of my suspension travel.

Memphis370Z · 04-22-2019, 08:37 PM

Quote:

Originally Posted by madwi

Which coils did you get Memphis?

BC Racing with Swift Springs upgrade.

Quote:

Originally Posted by Rusty

Mine rub at stock height with the 275/35-19 tires. On the track. I'm using all of my suspension travel.

No doubt.

It probably doesn't help that I'm running 265s in the front.

Rusty · 04-22-2019, 09:18 PM

Quote:

Originally Posted by Memphis370Z

BC Racing with Swift Springs upgrade.

No doubt.

It probably doesn't help that I'm running 265s in the front.

Have 285/35-19 on the front now.

Memphis370Z · 04-22-2019, 09:21 PM

Quote:

Originally Posted by Rusty

Have 285/35-19 on the front now.

That's a lot of bacon.

Rusty · 04-22-2019, 09:30 PM

Quote:

Originally Posted by Memphis370Z

That's a lot of bacon.

Somewhere down the line. Would like to put 325/30-19 on the front to go along with my 345/30-19 in the rear. I would be almost square then.

madwi · 04-22-2019, 09:53 PM

Quote:

Originally Posted by Rusty

Somewhere down the line. Would like to put 325/30-19 on the front to go along with my 345/30-19 in the rear. I would be almost square then.

Spooler · 04-22-2019, 10:30 PM

Quote:

Originally Posted by Memphis370Z

That's a lot of bacon.

That is on a 9.5in rim. LOL I run the same 285/35/19 on a 10in rim. It's not bad to fit at all. Now a 10.5in. rim is a challenge on the front to fit properly without a ton of camber.

Rusty · 04-22-2019, 10:42 PM

Quote:

Originally Posted by Spooler

That is on a 9.5in rim. LOL I run the same 285/35/19 on a 10in rim. It's not bad to fit at all. Now a 10.5in. rim is a challenge on the front to fit properly without a ton of camber.

Plasma cutter.

Shultzie · 04-23-2019, 06:32 AM

Well I finally got to drive the Z again since last November. Moved it from my old house to my new garage. The weather was good enough to get it out about a month ago, but I didn't have my new garage built yet. I just need to get electric ran and then finish the inside. It's good to have it back. So now I have to get the Harley's from my brothers house.

Leingod · 04-23-2019, 07:56 AM

Quote:

Originally Posted by Rusty

Plasma cutter.

You're making the cuts on my hood with that thing

04-22-2019, 07:33 PM	#2927 (permalink)
OTW Z-Boy A True Z Fanatic Join Date: Mar 2012 Location: Temecula Ca Posts: 1,225 Drives: 14 Nismo 370z #495 Rep Power: 750	Or just drive normally for a few hundred miles they’ll sort themselves out lol Sent from my iPhone using Tapatalk Rusty, Memphis370Z and BettyZ like this. __________________ 2014: Nismo 370z #495 Magnetic Black - Stillen Gen3 CAI \| SPL F/R Camber Arms \| HKS Hypermax IV \| JDM Rear Fog Light \|GT-R Push Start Button \| Z1 2 Piece D/S \| Illuminated Kicks \| Tommykaira \| Work VS-XX BKB Step Lip +23/+13 19" 9.5/11 \| Fast Intentions RHFC TDX CBE 12" CF \| EcuTek

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

04-22-2019, 08:04 PM	#2930 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,400 Drives: Granma red Z Rep Power: 2684428	Which coils did you get Memphis?