What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

BboyZ · 07-07-2017, 12:45 AM

This temp is your day time.

Where I'm at, that temp is my midnight time going home from work.

xcomms · 07-07-2017, 09:09 AM

Been done on here a bunch of times but I took the liberty of making some small adjustments to it.

Been holding on to this until I got the Nismo Rear Bumper on the Roadster.

JTM88 · 07-08-2017, 09:02 PM

I've been off of work all week so I decided to start a new 3D printed project for the Z.

I decided to make a 3D printed shift knob, and after a few iterations I have one IO like.

It's a fairly simple design printed out of ABS. I modeled a top and bottom piece and filled them with BBs and epoxy to add some mass, and then use a M10-1.25 flange nut pressed into the bottom half and used JB wled to hold it into place. I then used acetone to chemically weld the 2 pieces together and then smoothed it with an acetone vapor bath.

I may paint it, but I'm still not sure. I Kind of like the idea of knowing that it's 3d printed. I can't find my kitchen scale otherwise I'd weigh it.

Link to files
https://www.thingiverse.com/thing:2425722

DeliriousClam · 07-08-2017, 09:12 PM

Officially christened it with its name

TreeSemdyZee · 07-08-2017, 09:20 PM

Quote:

Originally Posted by DeliriousClam

Officially christened it with its name

I see you got "Photobucketed" too.
I pulled all of my images off of there and will never use them again.

DeliriousClam · 07-08-2017, 09:48 PM

Quote:

Originally Posted by TreeSemdyZee

I see you got "Photobucketed" too.
I pulled all of my images off of there and will never use them again.

Yeah I'm done with them. Using Flickr now

Here's the pic I was trying to post

ScottM · 07-09-2017, 05:26 AM

When you put on that shift knob don't forget the gallon of lock-tite that Nissan recommends

madwi · 07-09-2017, 10:06 AM

Quote:

Originally Posted by TreeSemdyZee

I see you got "Photobucketed" too.
I pulled all of my images off of there and will never use them again.

Try going there without an adblocker turned on. I dont think it ever stops loading junk.

On topic, going to start wire managing some unruly audio cables.

Don-MT · 07-09-2017, 11:31 AM

Quote:

Originally Posted by Don-MT

In the last 4 days: 4 new Michelin Pilot Super Sports and 1500 miles (1200 with the top down)in 3 US states and 2 Canadian provinces including Canada Day with friends in Manitoba. And, I still have a week on the road. A baseball game tonight, and an anniversary tomorrow. Life is good!

Update: Back home and here's a few numbers and thoughts- A total of 2872 miles in 9 days. 5 states.. 2 provinces. 350 milers on interstate including a 200 mile 80+ mph run. (You've got to love Montana). The balance of the trip was on 2 lane roads and city. Close to 2400 miles with the top down. Average of 25.8 mpg. With the outside air temperature pushing 95F at times the oil temp never got above 225F includeing the 200 mile, 80+ mph interstate run at 98F. The Michelin PSS are a great touring tire as well as being sticky when you need them to be. And, yes, you can back 9 days worth of needs for 2 adults as well as a Lowe backpack for camera gear in a 370Z Roadster and still have room to spare. Now, back to work Monday morning.

Jayhovah · 07-09-2017, 05:01 PM

Picked up a scratched up rear bumper someone was giving away for free on craigslist... plan to attempt/learn:
stripping off the paint
shaving the rear emblem
repaint with aerosol cans - automotive touchup KAD and 2k clear

Zingston · 07-09-2017, 05:11 PM

Drove from St Pete/Clw to western NC (~600 miles), and only saw one 370z the whole way. Amazing!

Spooler · 07-09-2017, 07:37 PM

Washed her up today. I lost 5 pounds of water. It's freaking hot and humid.

shadow85 · 07-09-2017, 11:16 PM

Just wondering how many of you guys here have a boosted Z that drive it daily, to work, shopping, family etc.

Sway · 07-09-2017, 11:41 PM

Got some new shoes for my baby put on today.

DeliriousClam · 07-10-2017, 10:26 PM

brought it to a car meet. Ran into two R34 GT-Rs and an R33. The owner of the blue R34 let me drive it. I can now die happy. (yes they were federally legal)

IMG_20170710_221214 by Michael Giliberti, on Flickr

IMG_20170710_222608 by Michael Giliberti, on Flickr

IMG_20170710_222447 by Michael Giliberti, on Flickr

And my friend took a pic of my and his car.

IMG_20170710_232535_625 by Michael Giliberti, on Flickr

07-07-2017, 09:09 AM	#167 (permalink)
xcomms Base Member Join Date: Jan 2017 Location: Florida Posts: 101 Drives: 370Z Touring/Sport 6 Rep Power: 596	New Rear Emblem Been done on here a bunch of times but I took the liberty of making some small adjustments to it. Been holding on to this until I got the Nismo Rear Bumper on the Roadster. mag_black, falicfr, QuZang and 1 others like this. __________________ -XComms

07-08-2017, 09:02 PM	#168 (permalink)
JTM88 Enthusiast Member Join Date: Oct 2016 Location: Houston, TX Posts: 276 Drives: 2012 370Z Rep Power: 13	I've been off of work all week so I decided to start a new 3D printed project for the Z. I decided to make a 3D printed shift knob, and after a few iterations I have one IO like. It's a fairly simple design printed out of ABS. I modeled a top and bottom piece and filled them with BBs and epoxy to add some mass, and then use a M10-1.25 flange nut pressed into the bottom half and used JB wled to hold it into place. I then used acetone to chemically weld the 2 pieces together and then smoothed it with an acetone vapor bath. I may paint it, but I'm still not sure. I Kind of like the idea of knowing that it's 3d printed. I can't find my kitchen scale otherwise I'd weigh it. Link to files https://www.thingiverse.com/thing:2425722 Jayhovah likes this. __________________ 2012 Base Gun Metallic MT6 -CNT Racing CBE-Swift Sport Springs-Sport Akebono BBK-Z1 Motorsports Intakes-König Oversteer Wheels-1320 Resonated Test Pipes -RJM Rev 2.1 Clutch Pedal- Last edited by JTM88; 07-08-2017 at 09:04 PM.

07-08-2017, 09:12 PM	#169 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 30 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54271	Officially christened it with its name __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

07-09-2017, 11:41 PM	#179 (permalink)
Sway Track Member Join Date: Sep 2012 Location: TX Posts: 697 Drives: 2018 GTR Rep Power: 37870	Got some new shoes for my baby put on today. Hotrodz, jchammond, QuZang and 1 others like this. __________________ - White 2018 GTR FBO+E85 - Check out my old build thread: Sway’s Journal-Hitomi ~Live and let live!~

07-10-2017, 10:26 PM	#180 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 30 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54271	brought it to a car meet. Ran into two R34 GT-Rs and an R33. The owner of the blue R34 let me drive it. I can now die happy. (yes they were federally legal) IMG_20170710_221214 by Michael Giliberti, on Flickr IMG_20170710_222608 by Michael Giliberti, on Flickr IMG_20170710_222447 by Michael Giliberti, on Flickr And my friend took a pic of my and his car. IMG_20170710_232535_625 by Michael Giliberti, on Flickr Hotrodz, Sway, Jayhovah and 4 others like this. __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

07-07-2017, 12:45 AM	#166 (permalink)
BboyZ Enthusiast Member Join Date: Aug 2015 Location: Arizona Posts: 446 Drives: 2016 Z34 Nismo Rep Power: 9	This temp is your day time. Where I'm at, that temp is my midnight time going home from work.

07-09-2017, 05:26 AM	#172 (permalink)
ScottM Base Member Join Date: Jul 2016 Location: Iroquois Ontario Posts: 244 Drives: 2017 370z Coupe Rep Power: 42161	When you put on that shift knob don't forget the gallon of lock-tite that Nissan recommends

07-09-2017, 05:11 PM	#176 (permalink)
Zingston A True Z Fanatic Join Date: May 2017 Location: Florida Posts: 4,028 Drives: like it's a rental. Rep Power: 2684369	Drove from St Pete/Clw to western NC (~600 miles), and only saw one 370z the whole way. Amazing!

07-09-2017, 07:37 PM	#177 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,504 Drives: 2013 Nismo 370z Rep Power: 2684391	Washed her up today. I lost 5 pounds of water. It's freaking hot and humid.

07-09-2017, 11:16 PM	#178 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 917 Drives: 15' 370Z A/T AMM TT Rep Power: 24	Just wondering how many of you guys here have a boosted Z that drive it daily, to work, shopping, family etc.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM