Just got tuned with impressive results

OptionZero · 01-30-2019, 06:59 PM

Quote:

Originally Posted by Rusty

Stock and will mods, but no tune. The Z does run rich. The tune will lean it out. Avg HP and torque with no tune Nismo's are around 279 Hp and 240 ftlbs. With mods and no tunes. 310 and 260 ftlbs avg. Full bolt on with LTH's will get you into the 330's and high 260's and low 270's in torque. Add ported intakes and larger throttle bodies will get you into the high 330's and low 340's. Add exhaust cam, you're in the 340's.

With something better than california pisswater 91
The type of dyno matters too

I have FI HFC, catback, and stillen G3, on california 91 and an ecutek
just under 300 hp on a mustang dyno

Rusty · 01-30-2019, 07:41 PM

Quote:

Originally Posted by OptionZero

With something better than california pisswater 91
The type of dyno matters too

I have FI HFC, catback, and stillen G3, on california 91 and an ecutek
just under 300 hp on a mustang dyno

Mustang dyno=heart breaker.

From what I've seen posted on the forum over the years. What i posted is about avg. Yeah, different dyno's, different weather condition, different fuels will give different results too.,

What I found over the years. You can build 5 identical engines in every way. You will end up with one that runs really strong, one that is a dog, and the other 3 are avg. You always hope that you don't get the dog.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wow...Impressive Engine!!!	the_student	Other Vehicles	4	01-28-2014 03:54 PM
Motion Lab Tuned 422whp/310wtq 2010 Z Stillen, GReddy, and MLT great results @ 10PSI!	Motion Lab	Tuning	9	07-02-2013 05:02 PM
Forged Performance: 2013 Black Edition GT-R Tuning Results - 1st Tuned 2013!	ChadB@Forged	Other Vehicles	5	03-08-2012 02:42 PM
Uprev Tuned at Z1, results inside :)	'10Anamoly	Tuning	12	01-01-2012 12:32 PM
UpRev tuned @ R/T Tuning - Results	Fed Hill Z	Tuning	32	05-14-2011 08:20 AM