THE BULL

Hey, I just saw your post about the yaw sensor kit. What's the price for one of them? I'd be very interested in buying if you're still in production.

South FL just got a tease, It was pretty surreal to see some of the west coast under water. That would have ****** south FL if it hit the same way.

There is a trace of failure and is in the composition of the clutch reservoir line. This line deteriorates and starts to introduce that goo into the system. If this line is replaced(folks use...

South FL just got a tease, It was pretty surreal to see some of the west coast under water. That would have ****** south FL if it hit the same way.

There is very little or minimal that you can do to "break in" a catalytic converter. Usually means a steady warm up, once they're up to temp and they start catalyzing that all there is too it. ...

Intermittent issues normally lead to tires. It happened to me on my coupe staggered setup on a sedan. Had the normal size I get in a different brand ended up having more meat on the tire which...

Random thought that came from deleting the heater pipes on my swap. Though not thoroughly tested yet, I learned that the heater ALWAYS sees flow and realistically sending hot coolant back into the...

This looks really good. I have seen the inserts for square type vents where it keeps the vent and gauge however for the Z it looks like unless you can find a smaller gauge it wont work. Great...

Correct. You should be able to monitor your A/Fs to find out if they are operating at all. Going from a normal sound to a weird sound can be a leak, it can also mean that the cats are done and...

Correct. You should be able to monitor your A/Fs to find out if they are operating at all. Going from a normal sound to a weird sound can be a leak, it can also mean that the cats are done and...

Random thought that came from deleting the heater pipes on my swap. Though not thoroughly tested yet, I learned that the heater ALWAYS sees flow and realistically sending hot coolant back into the...

Love to see someone else trying 4 inch vent ducts to feed the stock airboxes I can swear by this mod. You should look into 3.7 Q50 ones, they're bigger however might take a custom front to fit...

I ended up cutting the center rib on mine's then glued it back. I was dreading cutting but dreaded taking the front end more than anything else.

My attempt at it was to purchase new YAW connectors to avoid cutting. Worked great however after finding the 2016+ issue with brake override decided to stop making them. The connectors are not...

My attempt at it was to purchase new YAW connectors to avoid cutting. Worked great however after finding the 2016+ issue with brake override decided to stop making them. The connectors are not...

When you did the gaskets did you check any other components? Usually the p0011/p0021 = gasket however depending on how long it was ran like that it's quite possible it received some VTC damage and...