Oil pressure gauge

Setluky · 04-09-2022, 05:05 PM

Hi
I put the gauge in the door air duct.all the needed electrical wire are in the door,(light,always on and ignition on) . I pass sender wire trough the stock gromet and go to the engine Bay by the fender.the gauge visibility is good and i dont care about the air duct discard

Red Voodoo · 04-09-2022, 11:31 PM

I have to have my air vent, so I couldn't do this, but short of an A-pillar gauge pod, this is likely the least invasive option to add a gauge without it looking tacky. Looks great!

filip00 · 04-10-2022, 02:59 AM

This looks really well done!

rspray2000 · 04-10-2022, 09:46 AM

There’s someone on FB making and selling kits for this. I want to put a boost gauge there, though

DrBacon · 04-10-2022, 04:29 PM

I've thought about doing this as well. I have a triple gauge pillar that's full but there's still one more I want to add, this always seemed like the best place to do it.

filip00 · 05-02-2022, 02:47 PM

OP - do you maybe have additional pics or information about what exactly did you do with which wires etc.? I'll probably be doing this exactly as you did, as it's just such a brilliant job.

filip00 · 08-09-2022, 04:44 PM

About to embark on the oil pressure gauge install, but first I must buy it!
I found this thing on amazon:
https://www.amazon.de/-/en/RSP-GLED5.../dp/B082QVGGW9

Does anyone know anything about them? This seems to match Nissan OEM gauge style and goes high enough. I was looking online but can't find anything about this company RSP.

Thanks for any input.

Rusty · 08-09-2022, 06:11 PM

Quote:

Originally Posted by filip00

About to embark on the oil pressure gauge install, but first I must buy it!
I found this thing on amazon:
https://www.amazon.de/-/en/RSP-GLED5.../dp/B082QVGGW9

Does anyone know anything about them? This seems to match Nissan OEM gauge style and goes high enough. I was looking online but can't find anything about this company RSP.

Thanks for any input.

Don't know anything about them. But the gauge and the sensor both have to be rated to 150 psi. On cold starts and high rpm, th epressure will be over 100 psi.

filip00 · 08-10-2022, 02:07 AM

Quote:

Originally Posted by Rusty

Don't know anything about them. But the gauge and the sensor both have to be rated to 150 psi. On cold starts and high rpm, th epressure will be over 100 psi.

Yeah, this gauge is 10 bar, that's 145 psi. I ordered it so I'll post more info once it arrives.

THE BULL · 08-11-2022, 09:25 AM

This looks really good.

I have seen the inserts for square type vents where it keeps the vent and gauge however for the Z it looks like unless you can find a smaller gauge it wont work.

Great job over all.
What gauge is that?

BettyZ · 08-12-2022, 09:35 AM

Love to see the wiring for that. I considered it but didnt want to cut into the grommet

04-09-2022, 05:05 PM	#1 (permalink)
Setluky Base Member Join Date: Sep 2021 Location: Quebec Posts: 2 Drives: 370z Rep Power: 5	Oil pressure gauge Hi I put the gauge in the door air duct.all the needed electrical wire are in the door,(light,always on and ignition on) . I pass sender wire trough the stock gromet and go to the engine Bay by the fender.the gauge visibility is good and i dont care about the air duct discard JARblue, danegrey, Averying and 4 others like this.

04-09-2022, 11:31 PM	#2 (permalink)
Red Voodoo Base Member Join Date: Feb 2019 Location: NE Tennessee Age: 51 Posts: 142 Drives: a hard bargain! Rep Power: 8	I have to have my air vent, so I couldn't do this, but short of an A-pillar gauge pod, this is likely the least invasive option to add a gauge without it looking tacky. Looks great! Optimiser and SLOPOS like this. __________________ 2010 QAB Zed Roadster \| Touring \| Sport \| Navigation K&N \| Z1 \| Swift \| Koni \| Eibach \| SPL \| SPC \| Ichiba \| Evo-R

08-11-2022, 09:25 AM	#10 (permalink)
THE BULL Base Member Join Date: Apr 2021 Location: Florida Posts: 216 Drives: G37S Rep Power: 26850	This looks really good. I have seen the inserts for square type vents where it keeps the vent and gauge however for the Z it looks like unless you can find a smaller gauge it wont work. Great job over all. What gauge is that? BettyZ likes this.

08-12-2022, 09:35 AM	#11 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: USA Age: 39 Posts: 5,264 Drives: A Garage Queen Rep Power: 2684372	Love to see the wiring for that. I considered it but didnt want to cut into the grommet __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil Pressure Gauge	Rusty	Engine & Drivetrain	10	10-13-2017 05:17 PM
[FOR SALE] AEM Oil Pressure Gauge Kit	cotizi	Parts for sale (Private Classifieds)	4	04-29-2012 11:27 AM
oil Pressure Gauge	Hi-Step'n370Z	Exterior & Interior	7	11-16-2010 12:06 AM
Oil Pressure Gauge	37Z	Exterior & Interior	0	06-14-2009 09:21 PM
What happened to the tire pressure gauge and speedo in the middle gauge cluster?	rbratton	Nissan 370Z General Discussions	33	01-24-2009 10:28 PM

04-10-2022, 02:59 AM	#3 (permalink)
filip00 Track Member Join Date: May 2021 Location: slovenia Posts: 596 Drives: 370z pack Rep Power: 125429	This looks really well done!

04-10-2022, 09:46 AM	#4 (permalink)
rspray2000 Base Member Join Date: Mar 2019 Location: MA Posts: 169 Drives: 2013 T/S Roadster AT Rep Power: 4236	There’s someone on FB making and selling kits for this. I want to put a boost gauge there, though

04-10-2022, 04:29 PM	#5 (permalink)
DrBacon Enthusiast Member Join Date: Nov 2016 Location: Washington Posts: 286 Drives: 2014 Nismo Rep Power: 27366	I've thought about doing this as well. I have a triple gauge pillar that's full but there's still one more I want to add, this always seemed like the best place to do it.

05-02-2022, 02:47 PM	#6 (permalink)
filip00 Track Member Join Date: May 2021 Location: slovenia Posts: 596 Drives: 370z pack Rep Power: 125429	OP - do you maybe have additional pics or information about what exactly did you do with which wires etc.? I'll probably be doing this exactly as you did, as it's just such a brilliant job.

08-09-2022, 04:44 PM	#7 (permalink)
filip00 Track Member Join Date: May 2021 Location: slovenia Posts: 596 Drives: 370z pack Rep Power: 125429	About to embark on the oil pressure gauge install, but first I must buy it! I found this thing on amazon: https://www.amazon.de/-/en/RSP-GLED5.../dp/B082QVGGW9 Does anyone know anything about them? This seems to match Nissan OEM gauge style and goes high enough. I was looking online but can't find anything about this company RSP. Thanks for any input.