TBatt

TBatt Wrote :
Last night I found the problem. A connector was not fully seated on the transmission harness that has the hookups for the O2 sensors. There is a single wire connector that goes up near the starter motor that was not seated all of the way. When it was fixed the car started up.
--------------------
Sorry to bug you 6 years after you posted this - but i have having the same trouble (No recent work done to the car)
I checked the switch with an ohm meter and checked the fuse and the only relay i could find in the IPDM.

The wire you referred to .... where did it come from / Go to?
Thanks Tons for any help you could offer.
Dylan

PM’d you !

Crazy enough I'm in Huntsville and have been looking for a new (to me) car. I had test drove a Nismo up at Jerry Damson but it sold before I got the go ahead from my wife. I was wondering if you where available next week to meet up so that I can check out the 370. I'm Montgomery this weekend but will be back in Huntsville on Monday.

-Edward

Sorry for the slow response but I've been crazy busy at work.

Send via PayPal. My account is tbatt@knology.net

Sounds good where do I send the payment and shipping info too?

The complete kit, with shipping in the US is $175.

Hi ,
How much do you charge for your stillen idler pulley and hd belt upgrade ?

Yes, but i don't have them with me at the moment, they are at my office.

Nice car- Roll Tide ('15)!

Can you share your offsets?

Success!!!! Fired her up around 12:30. Dang that SC rattles a lot. It's a good thing that I knew that they do when they are at idle speed. One of my other motor head buddies drives a CTS V-Spec...

Success!!!! Fired her up around 12:30. Dang that SC rattles a lot. It's a good thing that I knew that they do when they are at idle speed. One of my other motor head buddies drives a CTS V-Spec...

The shop just called and they have my pipe fixed. They are great about serving walk-in business. Same day service is hard to find in shops these days. When I walked in with the pipe he said that...

Success!!!! Fired her up around 12:30. Dang that SC rattles a lot. It's a good thing that I knew that they do when they are at idle speed. One of my other motor head buddies drives a CTS V-Spec...

I'm scheduled to be on the dyno on the 25th.

Finishing up my Stillen SC install. With luck I should be able to fire the beast up TOMORROW. Shooting for 450rwhp. The tune will happen next Saturday at Z1. :driving:

Finishing up my Stillen SC install. With luck I should be able to fire the beast up TOMORROW. Shooting for 450rwhp. The tune will happen next Saturday at Z1. :driving:

Finishing up my Stillen SC install. With luck I should be able to fire the beast up TOMORROW. Shooting for 450rwhp. The tune will happen next Saturday at Z1. :driving:

Finishing up my Stillen SC install. With luck I should be able to fire the beast up TOMORROW. Shooting for 450rwhp. The tune will happen next Saturday at Z1. :driving:

The shop just called and they have my pipe fixed. They are great about serving walk-in business. Same day service is hard to find in shops these days. When I walked in with the pipe he said that...

The shop just called and they have my pipe fixed. They are great about serving walk-in business. Same day service is hard to find in shops these days. When I walked in with the pipe he said that...

Houston, we have a problem.................before removing the MAF sensors from the stock intake, I used a marker to show airflow direction so I wouldn't install the sensor in the wrong direction. It...

Z1 in Georgia may be the closest and it ain't close. There is always John Visconti or have Seb do a remote tune. EcuTek ProECU Kit – Visconti Tuning...

Houston, we have a problem.................before removing the MAF sensors from the stock intake, I used a marker to show airflow direction so I wouldn't install the sensor in the wrong direction. It...

I like stealth. Don't let them know that you are carrying a "big stick". In a couple of weeks I'm planning on surprising the Ahole in the M3 that keeps aggravating me. He can slightly pull away...