SouthArk370Z

Thanks for liking Vanilla fudge post. Unfortunately the old ways of bringing new music and bands into view these days does not allow for actual albums to be produced. Lots of one hit wonder songs that will never be memorable and last the test of time. I guess Im old and like my parents, they did not like my 60's through 80's music ? Or am I telling the truth that today's contemporary music just sucks. In any event I did enjoy many of the music picks posted on this page. I like your car. Red is always a winner...

hey any chance you seen or know how to reloacate cruise control on 370z i got uprev tune and i want a nrg steering wheel. is it the same as 350z

Hey man, saw you were from S. Arkansas. I lived my early childhood in Camden. Currently in Fayetteville. Nice to run into fellow Arkansans!

Hey, man, I like that you have the FSM linked in your sig -- admirable

Helpful forum members are good forum members

Hey I noticed you had a post (way back in November of last year) in regards to someone have a rattle in their drivers door. You posted that the dealer adjusted something in the window regulator that fixed it. I have a door rattle too, and am beginning to suspect the window regulator. If you have any other insight into the issue I would appreciate it>

Hey, we should meet. I come to Arkansas two or three times a year to drive the Ozarks. Best roads I've ever been on . My first stop from here is Texarkana , then the next day, I just head out.

Thank you for the music compliment. I do like my music -- my interest got stalled around 1994 though.

Maybe your Google-fu will be as strong as cooltoy's one day, padawan. ;)

Changing maps without user input sounds like a power problem - you may have lost power long enough for the map selection params to reset. First thing I'd do is give the battery and terminals a good...

You may be better off buying an OBD/CAN-to-USB adapter and some software to run on a computer. I use an OBDPro Compact (http://www.obdpros.com/product_info.php?products_id=138) that I got for ~$40...

If all you want to do is read/clear DTCs, the units you mentioned are overkill. As Grindkiezer said, you can find a much cheaper unit. If you want to do any data monitoring/logging, they look like...

Go to any of the web search engines and use "P0710" as your search string.

If your installer disconnected the battery during the install, it will take a few minutes for the ECM to relearn. Go for a 15-20 minute drive, under varying load conditions. Or they may have...

Maybe your Google-fu will be as strong as cooltoy's one day, padawan. ;)

Maybe your Google-fu will be as strong as cooltoy's one day, padawan. ;)

So far, I haven't seen you "cheap out" on anything. Looks to me like you are just a very good shopper. ;) Keep up the good work and keep posting. :driving:

Scrub brush with mild soap, followed by a good rinse.

No. If you do nothing, it will take a few minutes for the ECM to relearn some settings (fuel trims, etc). But you'll have to do that anyway if you do a reset. On the other hand ... it won't hurt...

Correct. But gears do multiply torque.

It takes about 10 minutes or so to break in brakes. Search for "brake bedding"

If the squeal is not coming from a belt, it's may be a vacuum leak. Or possibly an exhaust leak. You need to get a better idea of where it's coming from.

Most car amps will function just fine with convection cooling only (the natural current produced by the heat from the amp). If you can't get the amp out from under the carpet, a 55 cfm fan should do...