kellyefields

Hey Kelly hope the move is going or went well. I never did get a chance to pick up my hood struts from you. If you have a set I will PM you my new address. I payed just for local pick up so let me know what shipping cost will be.

Dude, you have a beautiful car... wow.

Sent PM

Hi, I have a 2010 RHD 370Z in UK will these dampers fit my car if so have you sent any to the uk and what was the price

Hey! I see you are rocking the cv5s. Do you mind sharing your specs? I am looking at picking up a squared setup 20x10.5 +25. Do you think this would be too aggressive in the front?

Hey so I was reading this blog post about your Z back in september 2012 and you were mentioning that you were trowing the code P1239 and the car was going into limp mode because of the position of the two air filters and that you "making a air box out of a piece of aluminium from lowes to prevent direct air contact with the bottom filter".

I am having the exact same problem with my Stillen SC Z, did this fix your issue? Do you think you could share with me some photos of what you created, or explain to me in a little more detail exactly what you did?

I really appreciate it man!

Call me tonight....

Nice. Expensive? Or not so much...

Interesting combination of aero parts you got going on. So you have Stillen front, Amuse sides/rear, and CS Type N wing?

Happy Friday

good morning. BTW Rusty where you living now. by your location it looks like possibly Kentucky or Pennsylvania or maybe just the state in between the two? Lexington Ky here.

good morning. BTW Rusty where you living now. by your location it looks like possibly Kentucky or Pennsylvania or maybe just the state in between the two? Lexington Ky here.

i am all set in the exhaust department but thanks though. I see you are over in Louisville.

those are very nice, now i need to decide the color combination not sure if want a matte finish black on carbon or a gloss. decisions decisions. I will be in contact.

:tiphat:

:tiphat:

I will have results monday, I just installed the stillen headers, HFC's, motordyne manifold, stillen g3 intakes, stillen underdrive pully, and have a nismo exhaust with the muffler delete. it is...

Here is what I did for guage replacement using prosport guages and removing the dash completely. from left to right I have boost , oil pressure, oil temp in the dash that I can change from red to...

Here is a little better pic. I will take more during the day so you can see them better. but they are prosport premium halo series. They match the dash speedo very well. they have the amber ring...

the part number is 68236 they are about 20 buck from what I can tell. if you use 60mm guages you will have to grind those off and then attach to the new guages. if you use 52 mm guages the tabs...

you have to remove the entire dash to get the guage cluster out due to a bolt that is impossible to get to otherwise. You can cut it out but considering it only took about an hour to remove the...

Welcome to Project Mr. K' Thank you for stopping by and checking out the progress of my build. It has been a labor of love and it is nearing completion. Performance modifications are complete,...

Gentlemen, In an effort to get to know everyone in the area and have one location to pass upcoming events in the area I have created this thread. There are a few of us in the tampa area that are...

pics and price is required per forum rules. also what type of injectors are they. I may be interested.