JhillTrack Member |
Last Activity: 04-26-2024 12:31 PM
- User Lists
Visitor Messages
Showing Visitor Messages 1 to 4 of 4
-
you can text me at 832 584 7953 for faster response tell me your from 370z forum and i will reply
-
11-15-2017 04:35 PM - permalinklittlejuanitoMr. JHill,
My apologies for not replying sooner. I barely saw this message since you didn't send it to my regular inbox.
Anyhow, thanks so much for your settings, I'm gonna go ahead and give the "Street" version a try and see how I like it. I'll report right after.
As of now, I'm pretty much at stock height, albeit I'm on 18's with smaller diameter tires.
My Rebound settings are 8 front and Rear.
2.0 Front camber 1.8 Rear
0 toe front and a tad in rear.
Sway Bars: Full stiff front and Middle setting on rear. (Stillen).
Car feels very neutral and was able to dialed out a lot of the understeer -
Sure thing. When you start the car, it defaults to VDC-on, just like stock. To enable RaceRom:
1. Turn VDC off
2. Adjust the wheel-slip amount using the cruise control accel/decel. When you press up or down, you'll see the current value displayed on the oil temp gauge. It ranges from 0 to 100% (i.e. off to no-wheel slip) depending on what you set it at. I usually start around 50% and adjust from there. You can change it anytime the car is on.
Friends
Showing Friends 1 to 1 of 1
-
- Rusty
- Ronin Samurai - Assassin
Likes Received
355 Likes
-
MaysEffect liked post by Jhill On thread : D2 CoiloversHere mass maybe this will help you. As I said people used to always comment on how ti springs felt different/better than steel and often commented as being "plusher". Now that these new alloy...Liked On: 09-27-2017, 10:06 PM
Posted On: 09-27-2017, 09:47 PMlittlejuanito liked post by Jhill On thread : D2 CoiloversI think what hotrodz. Was getting at is the swifts "feel" softer which probably means more compliant. If we take for example a spring that is 400lbs per in and a block of rubber that is 400lbs per...Liked On: 09-27-2017, 12:33 PM
Posted On: 09-27-2017, 04:56 AMRusty liked post by Jhill On thread : D2 CoiloversI think what hotrodz. Was getting at is the swifts "feel" softer which probably means more compliant. If we take for example a spring that is 400lbs per in and a block of rubber that is 400lbs per...Liked On: 09-27-2017, 10:08 AM
Posted On: 09-27-2017, 04:56 AMHotrodz liked post by Jhill On thread : D2 CoiloversI think what hotrodz. Was getting at is the swifts "feel" softer which probably means more compliant. If we take for example a spring that is 400lbs per in and a block of rubber that is 400lbs per...Liked On: 09-27-2017, 09:27 AM
Posted On: 09-27-2017, 04:56 AMHotrodz liked post by Jhill On thread : D2 CoiloversI second the powertrix. I road and track them as well as some extended trips and am pleasantly surprised with what you get for what you pay. I wouldn't doubt fortune are in the same boat but after...Liked On: 09-25-2017, 04:52 PM
Posted On: 09-25-2017, 02:29 PMlittlejuanito liked post by Jhill On thread : D2 CoiloversI second the powertrix. I road and track them as well as some extended trips and am pleasantly surprised with what you get for what you pay. I wouldn't doubt fortune are in the same boat but after...Liked On: 09-25-2017, 03:21 PM
Posted On: 09-25-2017, 02:29 PMaxmea? liked post by Jhill On thread : Access panel for rear KW-V3 adjustmentI like how yours came out axmea and hoping for something similar with a little more flair. If I ever get these 3D printed then I'll see how it looks.Liked On: 09-22-2017, 08:47 AM
Posted On: 09-22-2017, 02:59 AMHotrodz liked post by Jhill On thread : Access panel for rear KW-V3 adjustmentI like how yours came out axmea and hoping for something similar with a little more flair. If I ever get these 3D printed then I'll see how it looks.Liked On: 09-22-2017, 08:34 AM
Posted On: 09-22-2017, 02:59 AMSpartan 1771 liked post by Jhill On thread : Uprev vs EcutekCool, nice results. I'm curious though is this same tuner vs same tuner at relatively same timeline? Just wondering how much of a controlled experiment this was. I myself am on ecutek and happy...Liked On: 09-22-2017, 06:05 AM
Posted On: 09-22-2017, 02:51 AMHotrodz liked post by Jhill On thread : ECUTEK = Adjustable Traction ControlHa well I was only just bumped to group b right before my last session where I did my impressive spin out. Was worried they would demote me after that one lol. So I'll hold on to the not good title...Liked On: 09-15-2017, 08:53 AM
Posted On: 09-15-2017, 02:05 AMHotrodz liked post by Jhill On thread : ECUTEK = Adjustable Traction ControlI was joking on the trail braking, that was all me screwing up. But yes all you have to do is find an open parking lot and do a tight turn and slam the gas as if you wanted it to step out a little...Liked On: 09-14-2017, 07:10 PM
Posted On: 09-14-2017, 01:27 PMlittlejuanito liked post by Jhill On thread : Ecutek tune concernJust because it flashes doesn't necessarily mean it's bad, it's just letting you know it had an occurrence and adjusted timing. I wouldn't doubt if the oem tune gets some pre ignition going over the...Liked On: 09-10-2017, 09:04 AM
Posted On: 09-10-2017, 01:45 AMlittlejuanito liked post by Jhill On thread : Ecutek tune concernLol dude the sel flashing is ecutek indicating to you that you have a knock occurrence so yes it will pull timing and that will absolutely rob power. I have not tested misfire sel flashing (oem) vs...Liked On: 09-10-2017, 09:03 AM
Posted On: 09-09-2017, 07:25 PMSilly Rabbit liked post by Jhill On thread : Ecutek tune concernLol dude the sel flashing is ecutek indicating to you that you have a knock occurrence so yes it will pull timing and that will absolutely rob power. I have not tested misfire sel flashing (oem) vs...Liked On: 09-10-2017, 07:31 AM
Posted On: 09-09-2017, 07:25 PMlittlejuanito liked post by Jhill On thread : Ecutek tune concernYea you can't really blame a tune for a poor install or parts failure causing a running concern. Fix the issue not the tune.Liked On: 09-09-2017, 06:27 PM
Posted On: 08-28-2017, 10:37 AM
All times are GMT -5. The time now is 11:05 AM.