gomer_110

Do you have any suggestions for spring rates? I am running motion control non-remote 2 ways with 12kg front and 10kg rear(stock location). Feels really soft to me and i get a lot of body movement. Rear seems pretty loose as well, i removed my rear sway and have 1/16th toe total. I plan on upgrading to the new tomei 1.5 lsd. In my current setup i overpower the sports oem lsd all the time on tight corners.

Thanks again.
Ryan

Having a hell of a time finding suspension settings to run the nismo 19x10.5 et23 wheels with 285 tires square. I found stuff of people using the rims but with smaller tires and no camber angles listed. I plan on running this setup in autox for stu class. Thanks

What was the cost of parts and install for clutch, CSC and flywheel upgrade, if you don't mind me asking?

Hi I have seen ya putting ur sway bars from eibach . And my question is "Are the nismo sway bars not good enough or you are looking at the better handling with eibach?" I think u did front and rear right. I went to a track race a couple weeks ago(my first time). wat happened to me was my nismo was stripping because I was on high speed then brake to make a hard corner. My rear wheels spin twice and I think it's partly cause of my sway bars. I am here to learn so your information would be super helpful. Thanks

Hi, just wanted to say hi. I'm in BG, if you're ever in the area hit me up or if there are any events in Toledo to gather. Thanks.

I have just licked myself up off the floor having heard this ... Apologies is it has done the rounds previously..... #5 : Viral Video : TVWeek - Television Industry news, TV ratings, analysis,...

If they came out with the 370z flange not one person complaining now would still buy. I see this all the time here. People want, want, want till the product comes then bail when it gets here....

I would suggest to have the Battery tested.

:iagree: And this is the MOST sense XiP has ever made, someone somehow hacked into his account, lol

You guys are funny. If the original Momentums where still available with the same flange you would be buying them up.

Sooo.... GTM is giving buyers the option to use Ecutek with their MHI kits.... That is pretty substantial and very telling of the software status.

The shop you turn to when Fuckèd Performance breaks your car :stirthepot: Welcome to the forum!

You guys upset about the flange have the wrong perspective. They have precisely the correct flange. They are 350z DE headers. You guys just have the wrong car.

Visconti is tuning my FI build in the next few weeks so hopefully that puts a lot of this to rest.

I'm not sure who these supporters are that you speak of. All I see are the tuners (no surprise they're supportive), some people who are excited about the potential of this software, and some people...

KIMI shouldn't have yielded on principle. It was a desperation move by Perez. Now, for self preservation, Kimi should have yielded. :icon17:

You should consider moving to Texas. http://www.weknowawesome.com/wp-content/uploads/2011/05/astronauts-born-ohio.jpg

Not to thread steal but...just be patient. There may be options in the near future. ;) Just saying

When is the expected roll out of the Full ECUTek package with all the features that are reported to make it better than UpRev?

Less than 40 minutes