gomer_110

Do you have any suggestions for spring rates? I am running motion control non-remote 2 ways with 12kg front and 10kg rear(stock location). Feels really soft to me and i get a lot of body movement. Rear seems pretty loose as well, i removed my rear sway and have 1/16th toe total. I plan on upgrading to the new tomei 1.5 lsd. In my current setup i overpower the sports oem lsd all the time on tight corners.

Thanks again.
Ryan

Having a hell of a time finding suspension settings to run the nismo 19x10.5 et23 wheels with 285 tires square. I found stuff of people using the rims but with smaller tires and no camber angles listed. I plan on running this setup in autox for stu class. Thanks

What was the cost of parts and install for clutch, CSC and flywheel upgrade, if you don't mind me asking?

Hi I have seen ya putting ur sway bars from eibach . And my question is "Are the nismo sway bars not good enough or you are looking at the better handling with eibach?" I think u did front and rear right. I went to a track race a couple weeks ago(my first time). wat happened to me was my nismo was stripping because I was on high speed then brake to make a hard corner. My rear wheels spin twice and I think it's partly cause of my sway bars. I am here to learn so your information would be super helpful. Thanks

Hi, just wanted to say hi. I'm in BG, if you're ever in the area hit me up or if there are any events in Toledo to gather. Thanks.

It's on the driver's side under the snap in cover by the brake and clutch fluid reservoirs.

guessing if he can't get enough leverage on the handle receiver he won't be able to get enough on the pedal. Best bet at this point is probably to get something on the square piece to lower the...

Had the same concern when I first started but after the first event I never worried about it again. The key is to walk the course. In the 2 years I've been autox'ing now, I've only ever seen one car...

Installed and ready for AutoX tomorrow. :tup: https://farm8.staticflickr.com/7307/14002060426_25e7ec58fc_z.jpg https://farm6.staticflickr.com/5495/14025186485_3420ece82e_z.jpg

reusable vinyl. Got mine at Welcome to SPS and Solotime! (http://soloperformance.com)

For the record, the cheater comment was meant as a joke.

Installed and ready for AutoX tomorrow. :tup: https://farm8.staticflickr.com/7307/14002060426_25e7ec58fc_z.jpg https://farm6.staticflickr.com/5495/14025186485_3420ece82e_z.jpg

Installed and ready for AutoX tomorrow. :tup: https://farm8.staticflickr.com/7307/14002060426_25e7ec58fc_z.jpg https://farm6.staticflickr.com/5495/14025186485_3420ece82e_z.jpg

Installed and ready for AutoX tomorrow. :tup: https://farm8.staticflickr.com/7307/14002060426_25e7ec58fc_z.jpg https://farm6.staticflickr.com/5495/14025186485_3420ece82e_z.jpg

Installed and ready for AutoX tomorrow. :tup: https://farm8.staticflickr.com/7307/14002060426_25e7ec58fc_z.jpg https://farm6.staticflickr.com/5495/14025186485_3420ece82e_z.jpg

Installed and ready for AutoX tomorrow. :tup: https://farm8.staticflickr.com/7307/14002060426_25e7ec58fc_z.jpg https://farm6.staticflickr.com/5495/14025186485_3420ece82e_z.jpg

Installed and ready for AutoX tomorrow. :tup: https://farm8.staticflickr.com/7307/14002060426_25e7ec58fc_z.jpg https://farm6.staticflickr.com/5495/14025186485_3420ece82e_z.jpg

Installed and ready for AutoX tomorrow. :tup: https://farm8.staticflickr.com/7307/14002060426_25e7ec58fc_z.jpg https://farm6.staticflickr.com/5495/14025186485_3420ece82e_z.jpg

Installed and ready for AutoX tomorrow. :tup: https://farm8.staticflickr.com/7307/14002060426_25e7ec58fc_z.jpg https://farm6.staticflickr.com/5495/14025186485_3420ece82e_z.jpg

No idea on the carbon box. The silver bar is most likely a sway bar end link (Doran designed their own bars). Guessing their AST shocks utilize a remote resevoir which has all the adjustments on it.