forza370z

I hope this doesn't happen to us w/ the headlight mods.

http://www.the370z.com/exterior-inte...light-off.html

LIP pics up check the album

I go to Umass lowell, whereabouts in the area are you?? the only Z ive seen in lowell is a Red Base 2011

I'm near Chelmsford st. in the Highlands. I'm in Lowell every weekend, and in Worcester during the week for work. We should meet up sometime. If you ever see me around, give me the middle finger or something =P

WORK Meister S13P Bronze Face, Bronze Lip, Gold Rivets https://farm8.staticflickr.com/7558/15783015295_a79c3ca33e_b.jpg

Just a place to share some of the more tame and exotic wraps installed on 370Zs. :tup: 2009 Mag Black 370Z sports: Owner theZmonster (http://www.the370z.com/members/thezmonster.html) 99780 ...

http://s30.postimg.org/p7tnlvd8x/Full_Size_Render_1.jpg Still can not get over the way the pearl looks. (^ Bad phone pic) I got a new camera and car parts for an early Valentines Day gift. I cant...

I had mine dropped on tein's and I did not change out the struts. The ride was much tamer than the stock springs. You will need rear camber arms and toe bolts. I agree with forza regarding coil...

The clutch plate wears over time. As in it physically gets thinner. There is a gap that needs to be maintained between the bearing and pressure plate (0.5mm-1.0mm). Therefore, you need to adjust...

I just made the first adjustment on my Z1 CSC Elimination Kit this past weekend. It's been almost 12K miles, and I made a 1/2 turn adjustment on the rearside threaded rod. It took me an extra 5...

Yep I say give Joe a call...looks like czp sells it as well https://conceptzperformance.com/Cart/description.php?II=12914

You can call us to order the rebuild kit if needed. We don't list them on the site.

Thank you for all your help Joe..I believe we spoke on the phone serveral times. Greatly appreciated.

Thought i'd post my results here: After speaking with zspeed and z1motorsports I decided on the zspeed HD to go along with my ACT HD Clutch. What turned me off about the delete is the recurring...

99776 99777 99778 99779 Believe it or not, it's a mag-black Z...

Sorry to hear that, but a smart move on replacing the clutch/flywheel as well. If the tranny is going to be dropped to replace the CSC, then you might as well kill two birds with one stone and...

I have to chime in here and mention that just because you do a conversion kit that changes the slave to external doesn't mean you will never have to pull the trans again, There will always be the...

07-08 350Z and 07-08 G35 Have the same clutch and slave set-up as the 370/G37 cars. Only the early DE models 03-06 Z/G had an external type slave, those early cars were the ones with trans syncro...

Crank walk has never been an issue with the VQ or the older VG engines, ANY Aftermarket clutch available Z1, Southbend or JWT for the 370Z is going to be almost identical in the terms of added force...