cv129

Well I am doing my best for Sean and SPL. I am driving the **** out of the arms and they are working as advertised. It did kind of piss me off that after I did a test or two or three I had to ship them off (take them off the Nismo) to the "professional drivers" and then it turns out they didn't test the new versions. As far as I am concerned, I am the best gauge of anyone on these arms. I might not be a race team but I am definitely a hard core track weekend warrior!!!!!!!

So who is CV129? Do I know you?

https://c8.staticflickr.com/9/8622/29652149303_bf19a0988b_b.jpg

So the last two weeks, my car has seen some stark visual changes. Namely; a circa 2004-2006 JGTC Motul/Pitwork/Autech 350z inspired livery. Why? The Gran Turismo series has a special place in...

Glad to see you typing. :tup: WOW!!! That's all I can say for now. Sounds like you might be a candidate for some fancy Ti metal putting you back together. And on that note. I'll give you something to...

I was DDing a Hemi 14 Grand Cherokee Summit until I bought this last July http://i1093.photobucket.com/albums/i433/AlWakRa/Mobile%20Uploads/20160718_094856.jpg A 2015 leftover that I got for a...

Well... we just accepted our first order for a set of manifolds. Time to get this thing going.

LOL, a driver sits behind the wheel and operates the controls. If anything goes wrong it is not the car. Time for folks to start taking responsibility for what they do.

http://i175.photobucket.com/albums/w123/cavillac95_photos/Mobile%20Uploads/20161011_161824_zpsvi1mejtd.jpg...

The doner 325is is turning out to be a gold mine for my build with mint parts. https://s11.postimg.org/7vqsp8pyb/IMG_0684.jpg https://s11.postimg.org/lvsuhdroj/IMG_0689.jpg ...

I've always been a Nissan Z fan since i was a kid, starting from my father 240, z31, and a z32, to my aunt's 280z, my other aunt owing a z31, . So in December of 2014 i purchased my 370z, with no...

I would not make the back end higher in hopes to get better drag times. I think it would mean you will have an even angle of squat on acceleration. The weight VB of the car will transfer most of its...

Got some autocross in yesterday, car felt really good and I'm slowly improving my times relative to everyone else, even beat a Viper in my class :) Here's a few pics ...

I installed my oil cooler today, those AN fittings are a pain. Since the bumper was off I cleaned my air filters, re-greased my sway bar bushings And installed some SPL end links. I also installed...

June Update .............. Porting now done, inlet flow is 328cfm at .600" lift with ITB fitted and WOT. This should equate to near enough 500hp @ the crank and we are hoping for 420+ atw ...

probably get more info from here E46 M3 (2001-2006) - BMW M3 Forum.com (E30 M3 | E36 M3 | E46 M3 | E92 M3 | F80/X) (http://www.m3forum.net/m3forum/forumdisplay.php?f=9)

There are many who did it the way you have it planned. If your paint cracks when the bumper flexes, then you took it to a bad shop. You will not save much by installing it yourself but pick up on...