Mozen's Build V 2.0

Mozen · 07-03-2013, 01:28 PM

That above brings us up to now where ive decided to paint the roll cage with a resin based appliance paint (tough) and repaint the GEN3s i hand painted because the clear coat i used yellowed heavily in the engine heat. Since i didnt want to F up the intakes again i took the car to the same shop who did my front bumper and side skirts and decided while it was there to have them paint the strut brace as well. I will post some pics when the car comes back from the shop tomorrow.

I will also add the Z1 LHP struts to the rear hatch and the kit they sell for the hood when i get the car back. More pics to follow!

synolimit · 09-14-2013, 09:20 PM

Quote:

Originally Posted by Mozen

That above brings us up to now where ive decided to paint the roll cage with a resin based appliance paint (tough) and repaint the GEN3s i hand painted because the clear coat i used yellowed heavily in the engine heat. Since i didnt want to F up the intakes again i took the car to the same shop who did my front bumper and side skirts and decided while it was there to have them paint the strut brace as well. I will post some pics when the car comes back from the shop tomorrow.

I will also add the Z1 LHP struts to the rear hatch and the kit they sell for the hood when i get the car back. More pics to follow!

Love the white. Not a huge fan of the design though with the cross bar on the main hoop not being inline with the main hoop. In a roll over the only top support is the main hoop since that cross bars angled backwards.

07-03-2013, 01:28 PM	#1 (permalink)
Mozen Track Member Join Date: Jun 2010 Location: Newport News, VA Posts: 820 Drives: Nissan 370z PW M6 Rep Power: 19	Part 3. That above brings us up to now where ive decided to paint the roll cage with a resin based appliance paint (tough) and repaint the GEN3s i hand painted because the clear coat i used yellowed heavily in the engine heat. Since i didnt want to F up the intakes again i took the car to the same shop who did my front bumper and side skirts and decided while it was there to have them paint the strut brace as well. I will post some pics when the car comes back from the shop tomorrow. I will also add the Z1 LHP struts to the rear hatch and the kit they sell for the hood when i get the car back. More pics to follow! GaleForce likes this. __________________ PW 370z \| AEM \| MISHIMOTO \| ARK PERFORMANCE \| WHITELINE \| NISMO \| STILLEN \| FORGESTAR \| BC RACING \| AMS \| NON STOP TUNING \| CARBONETICS LSD \| 4 Point DOM 1.75" SCCA Spec Roll Bar + Harness Bar CHECK OUT MY BUILD THREAD HERE Last edited by Mozen; 07-03-2013 at 02:10 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Possible Nos build	triadz	Forced Induction	7	04-06-2012 10:30 AM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 05:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM
You can build it..	bossman	Nissan 370Z General Discussions	1	01-03-2009 05:31 PM