NickTurnon's 370z Build

Zbrah · 11-15-2013, 04:20 PM

Where did you get the ensolite foam, Chuck?

TerribleONE · 11-15-2013, 04:21 PM

Car looks good man. Lovin the headlights

Chuck33079 · 11-15-2013, 04:37 PM

Quote:

Originally Posted by Zbrah

Where did you get the ensolite foam, Chuck?

Www.raamaudio.com. It's about $20/yd.

NickTurnon · 11-18-2013, 11:05 AM

Went to CA last week to visit family and work out there. Thankfully my job only requires a fast laptop and WIFI. Here are some photos that I took:

carlitos_370z · 11-18-2013, 01:19 PM

great pics my friend!!!

NickTurnon · 11-18-2013, 01:50 PM

Thanks Carlitos!

Riptide67 · 11-18-2013, 03:01 PM

Silver...the one color I wanted, but could not find! A true beauty you have there!

NickTurnon · 11-18-2013, 03:20 PM

Quote:

Originally Posted by Riptide67

Silver...the one color I wanted, but could not find! A true beauty you have there!

I would trade for black in a heartbeat! I just can't do the black in AZ, especially living at an apartment complex and not being able to wash the car daily/weekly.

But i appreciate the silver love!

Catchin-Z's · 11-26-2013, 10:02 AM

Hello there,

I like all the DIY tips and tricks, quite nice to see budget conscience mods do work and turn out just fine.

I was hoping you could provide a couple details as I am considering purchasing some wheel spacers. I posted up a couple questions on the 18" stock thread but no answer as of yet. As yours are stock 18" and 20 mm's... some questions for you if you do not mind...

I contacted CPZ performance and could not provide a definitive answer, unless I pull the front stock rim and provide an picture to them.

I noticed in your build images a picture of the front wheel and saw a "smaller" nut sticking out (not the studs for the attachment of the rim).

Did you have to remove that when installing the 20 mm spacer. Also which brand did you end up purchasing. Seems like the H&R Trak DRM (bolt on's) on the Stillen website state they do not fit the 370Z fronts. Hence the question out to you.

Also how did you black out the door handles, was that plasti dip?

Regarding your purchase of the rear wing via WingTech, how was your experience dealing with them. How was the fit, finish and color match? I tried calling them several times now, left messages and send them 2 e-mails and have yet to receive any comm's back, hence my hesitation.

Did you go through their website or via their ebay listings?

Thanks in advance on any info you can share.

Haboob · 11-26-2013, 10:17 AM

Quote:

Originally Posted by Catchin-Z's

Hello there,

I like all the DIY tips and tricks, quite nice to see budget conscience mods do work and turn out just fine.

I was hoping you could provide a couple details as I am considering purchasing some wheel spacers. I posted up a couple questions on the 18" stock thread but no answer as of yet. As yours are stock 18" and 20 mm's... some questions for you if you do not mind...

I contacted CPZ performance and could not provide a definitive answer, unless I pull the front stock rim and provide an picture to them.

I noticed in your build images a picture of the front wheel and saw a "smaller" nut sticking out (not the studs for the attachment of the rim).

Did you have to remove that when installing the 20 mm spacer. Also which brand did you end up purchasing. Seems like the H&R Trak DRM (bolt on's) on the Stillen website state they do not fit the 370Z fronts. Hence the question out to you.

Yeah, we removed that on mine, I'm pretty sure of it.

I went with the H&R (stud replacement, not bolt-on) spacers on mine. One of my favorite mods.

NickTurnon · 11-26-2013, 10:23 AM

Quote:

Originally Posted by Catchin-Z's

Hello there,

I like all the DIY tips and tricks, quite nice to see budget conscience mods do work and turn out just fine. That is what I am going for!

Budget friendly mods that can still look good and grab some attention.

I was hoping you could provide a couple details as I am considering purchasing some wheel spacers. I posted up a couple questions on the 18" stock thread but no answer as of yet. As yours are stock 18" and 20 mm's... some questions for you if you do not mind...

I contacted CPZ performance and could not provide a definitive answer, unless I pull the front stock rim and provide an picture to them.

I noticed in your build images a picture of the front wheel and saw a "smaller" nut sticking out (not the studs for the attachment of the rim). That little nut just spins right off, its for people to remember not to put the rear wheels on the front. But it comes off easily. Just store it with the other spare parts.

Did you have to remove that when installing the 20 mm spacer. Also which brand did you end up purchasing. Seems like the H&R Trak DRM (bolt on's) on the Stillen website state they do not fit the 370Z fronts. Hence the question out to you. 20mm spacers bolt on just fine. I have seen people rock 30mm up front with base 18's. I am not sure what brand I have. I bought them off a forum member who just happened to live a few miles away. I believe they are either H&R or z1 spacers..

Also how did you black out the door handles, was that plasti dip? Everything that you see on my car is plastipped black, except for the roof. Thats gloss black vinyl. Here is my DIY: DIY: How To Blackout/Plasti-dip Handles

Regarding your purchase of the rear wing via WingTech, how was your experience dealing with them. How was the fit, finish and color match? I tried calling them several times now, left messages and send them 2 e-mails and have yet to receive any comm's back, hence my hesitation. [COLOR="red" Most sellers on Ebay have shitty customer service. Its just something that you have to deal with. They get spammers calling all the time too. So its better if they just have an email sent over, but those can take awhile to respond to as well. I have the base and shopped for many different spoilers. The sport one just makes sense and it looks great. I purchased the wing and it came 2-3 days later and wrapped up perfectly. Came with all the hardware, painted perfectly to match brilliant silver. (You just give them a color code). Anyways for $130-140 it cant be beat.. I didn't even drill mine, because I might want to remove it. Been on there for months..[/COLOR]

Did you go through their website or via their ebay listings? They are both the same thing usually. Free shipping on ebay... Nissan 370Z 09 13 ABS Trunk Rear Wing Spoiler Painted | eBay

Thanks in advance on any info you can share.

Let me know if you have any more questions. I am happy to help!

Catchin-Z's · 11-26-2013, 11:21 AM

Nick & Haboob

Thanks so much for the rapid assist and helping out clarifying things with detailed explanations. That's what I love about this forum !

That little nut had me worried but now explains a ton.

Shooting for 20mm up front and 25 mm on the rears for now until I can save up for new rims and beefy tires (eventually).

Planning to do either gloss metallic black 1080 3M wrap on the roof or still heavily debating to go with a 3M Gloss Black Carbon style.

Also thanks on the confirmation on the wing, will order today and take a shot at it, at this price worth it.

Wish I was in AZ right now and avoid the snow though

! Lucky you.

Keep up the DIY's they are awesome

NickTurnon · 11-27-2013, 10:39 AM

I've taken on a project that I don't know if I can handle!
Wish me luck!

carlitos_370z · 11-27-2013, 12:52 PM

Thats the nismo rear bumper??

NickTurnon · 11-27-2013, 01:12 PM

Yeah, well, nismo replica! But going for something like this...

11-15-2013, 04:21 PM	#47 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Car looks good man. Lovin the headlights __________________ 638WHP 541WTQ @ 13.5PSI Build thread

11-18-2013, 11:05 AM	#49 (permalink)
NickTurnon A True Z Fanatic Join Date: Jul 2011 Location: Scottsdale Age: 33 Posts: 1,636 Drives: 09 BS 7AT 370z Rep Power: 17	Went to CA last week to visit family and work out there. Thankfully my job only requires a fast laptop and WIFI. Here are some photos that I took: Hotrodz, Riptide67 and carlitos_370z like this. __________________ 2009 Brilliant Silver BASE 7AT \| TEIN S-Tech Springs \| K&N Drop Ins & z1 Maf Tubes \| AAM S-Line Short Tails \| 5% Tint \| 20MM Spacers \| Sport Spoiler NickTurnon's 370z Build

11-18-2013, 01:50 PM	#51 (permalink)
NickTurnon A True Z Fanatic Join Date: Jul 2011 Location: Scottsdale Age: 33 Posts: 1,636 Drives: 09 BS 7AT 370z Rep Power: 17	Thanks Carlitos! carlitos_370z likes this. __________________ 2009 Brilliant Silver BASE 7AT \| TEIN S-Tech Springs \| K&N Drop Ins & z1 Maf Tubes \| AAM S-Line Short Tails \| 5% Tint \| 20MM Spacers \| Sport Spoiler NickTurnon's 370z Build

11-18-2013, 03:01 PM	#52 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 36 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 68	Silver...the one color I wanted, but could not find! A true beauty you have there! __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

11-26-2013, 11:21 AM	#57 (permalink)
Catchin-Z's Base Member Join Date: Oct 2013 Location: Parker, Colorado, USA Posts: 75 Drives: 2013 370Z Magma Red Rep Power: 11	Nick & Haboob Thanks so much for the rapid assist and helping out clarifying things with detailed explanations. That's what I love about this forum ! That little nut had me worried but now explains a ton. Shooting for 20mm up front and 25 mm on the rears for now until I can save up for new rims and beefy tires (eventually). Planning to do either gloss metallic black 1080 3M wrap on the roof or still heavily debating to go with a 3M Gloss Black Carbon style. Also thanks on the confirmation on the wing, will order today and take a shot at it, at this price worth it. Wish I was in AZ right now and avoid the snow though ! Lucky you. Keep up the DIY's they are awesome NickTurnon and Haboob like this.

11-15-2013, 04:20 PM	#46 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5451	Where did you get the ensolite foam, Chuck?

11-18-2013, 01:19 PM	#50 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	great pics my friend!!!

11-26-2013, 10:02 AM	#54 (permalink)
Catchin-Z's Base Member Join Date: Oct 2013 Location: Parker, Colorado, USA Posts: 75 Drives: 2013 370Z Magma Red Rep Power: 11	Hello there, I like all the DIY tips and tricks, quite nice to see budget conscience mods do work and turn out just fine. I was hoping you could provide a couple details as I am considering purchasing some wheel spacers. I posted up a couple questions on the 18" stock thread but no answer as of yet. As yours are stock 18" and 20 mm's... some questions for you if you do not mind... I contacted CPZ performance and could not provide a definitive answer, unless I pull the front stock rim and provide an picture to them. I noticed in your build images a picture of the front wheel and saw a "smaller" nut sticking out (not the studs for the attachment of the rim). Did you have to remove that when installing the 20 mm spacer. Also which brand did you end up purchasing. Seems like the H&R Trak DRM (bolt on's) on the Stillen website state they do not fit the 370Z fronts. Hence the question out to you. Also how did you black out the door handles, was that plasti dip? Regarding your purchase of the rear wing via WingTech, how was your experience dealing with them. How was the fit, finish and color match? I tried calling them several times now, left messages and send them 2 e-mails and have yet to receive any comm's back, hence my hesitation. Did you go through their website or via their ebay listings? Thanks in advance on any info you can share.

11-27-2013, 10:39 AM	#58 (permalink)
NickTurnon A True Z Fanatic Join Date: Jul 2011 Location: Scottsdale Age: 33 Posts: 1,636 Drives: 09 BS 7AT 370z Rep Power: 17	I've taken on a project that I don't know if I can handle! Wish me luck! GaleForce, Zbrah, carlitos_370z and 1 others like this. __________________ 2009 Brilliant Silver BASE 7AT \| TEIN S-Tech Springs \| K&N Drop Ins & z1 Maf Tubes \| AAM S-Line Short Tails \| 5% Tint \| 20MM Spacers \| Sport Spoiler NickTurnon's 370z Build

11-27-2013, 12:52 PM	#59 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	Thats the nismo rear bumper??

11-27-2013, 01:12 PM	#60 (permalink)
NickTurnon A True Z Fanatic Join Date: Jul 2011 Location: Scottsdale Age: 33 Posts: 1,636 Drives: 09 BS 7AT 370z Rep Power: 17	Yeah, well, nismo replica! But going for something like this... carlitos_370z likes this. __________________ 2009 Brilliant Silver BASE 7AT \| TEIN S-Tech Springs \| K&N Drop Ins & z1 Maf Tubes \| AAM S-Line Short Tails \| 5% Tint \| 20MM Spacers \| Sport Spoiler NickTurnon's 370z Build Last edited by NickTurnon; 11-27-2013 at 02:01 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking to build your 370z?	Marti	Sponsor Classifieds	46	05-22-2014 07:42 PM
Our first 370Z build.	Jeff Smith	Audio & Video	68	04-15-2011 06:36 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM
Build your own - 370Z	4MYZ370	Nissan 370Z Pricing / Ordering Discussions	22	02-10-2009 07:35 PM