NickTurnon's 370z Build

taddraughn · 08-28-2013, 12:00 PM

That headlight blackout makes it look so mean. Awesome work

NickTurnon · 09-29-2013, 01:16 PM

Debating creating a DIY for this because I am not 100% sure on how long they will last compared to the FRP material, or the fiberglass ones created by professional companies..

I took a stroll thru Home Depot yesterday (Sat.) and decided to look at different types of materials that could be used for side blades/skirts. The ones online & offered by sponsors are anywhere from $250-400 for basic side blades.

I ended up spending about 4-5 hours worth of my time on these, but for the $$$ spent, I could care less if they lasted a few months.

If you guys want a little write-up, I can do it. & post more pics. But here are the custom side skirts.. I will probably get so flamed for this.

carlitos_370z · 09-30-2013, 07:14 AM

man dont look bad for a DIY... if you want do the thread for the members who are interested on this...

NickTurnon · 09-30-2013, 09:31 AM

I made a DIY for you guys carlitos!

DIY: Side Blades/Skirts

NickTurnon · 10-15-2013, 11:49 AM

Snapped a decent photo with my S3 today after I washed it - Showing off the side skirts.

carlitos_370z · 10-15-2013, 12:59 PM

looks great bro!!!

NickTurnon · 10-19-2013, 03:19 PM

Lets face it, the 370z is loud inside the car. Especially when you have short tails.

I saw the offers for GTMat on the forum and didn't jump on it. I looked up prices for Dynamat, SecondSkin, etc.. and found that they were $$$.

After a bit of research I found a product called Peel & Seal. I can write up a DIY if people are interested. Anyways, I paid $16.99 for 25 ft of it. (I got 2)= $34

First things first, was I read the DIY on how to remove the rear panels. Everything came out really easily. I had the rear gutted in less then 10 minutes. Didn't realize how large it was without the foam pieces and panels.

I took it out for a road test without anything in the trunk and WOW, its like a giant rattle can. Especially when I was downshifting haha!

Sorry about the Red lines...Not sure what happened there.

I tried to get the whole back area as much as possible without going overboard. It took about a roll and a half to do the rear and middle cubby area.

I then did a couple of road tests and realized I needed to do the door panels. I heard a lot of sound coming from the doors.

Door panels are super easy to remove. Just need a little flathead screwdriver, a large philips, and a 10mm socket.

Both doors took about a half a roll. (10-13 feet worth).

Impressions:
Road noise has gone down a bit. I stopped hearing little rocks and stuff under the wheel wells.
No smell like some people stated. When applying, you will smell the tar/rubber stuff.
Exhaust sounds better.
Speakers sound like they are easier to hear and less rattle.

Overall I am very pleased. It was a fun project and I would recommend it to anyone.

Apparently this Peel & Seal stuff works almost identically to dynamat. The main differences are the thickness and probably what its made of. Also peel and seal is not made for sound deadening. Its made for roofers.

Good luck to anyone that wants to try this out! I can answer any questions

Haboob · 10-20-2013, 03:50 PM

Nicely done.

I've grown used to the loud sound and don't even notice it anymore.

How heavy is that material? Probably insignificant, but you never know. I remember dynamat being quite thick and heavy.

Sent from my iPhone.

NickTurnon · 10-20-2013, 04:04 PM

Quote:

Originally Posted by Haboob

Nicely done.

I've grown used to the loud sound and don't even notice it anymore.

How heavy is that material? Probably insignificant, but you never know. I remember dynamat being quite thick and heavy.

Sent from my iPhone.

You've probably grown to love the sound because you have stillen mods haha!

Stillen catback muffles so much and is pretty quiet in my opinion. I will have to take you for a ride when I see you

The total weight added was 8 lbs (2 rolls). I'd say thats me after Thanksgiving dinner

Haboob · 10-20-2013, 04:27 PM

Heck yeah. My buddy and I are out at the Pavs almost every weekend too. We park way away passed the Home Depot (his GTR and my Z).

Won't be there this Saturday, but the following most likely.

Sent from my iPhone.

carlitos_370z · 10-24-2013, 07:58 AM

nice DIY bro!!!!

Riptide67 · 11-12-2013, 11:24 PM

Great write up about the peel and seal! I checked to see if Home Depot carries it but they don't. So, I'm gonna hit Lowe's this weekend. I did some extra research online and it seems like many enthusiasts use he product on their builds.

Thanks again for the recommendation. It will certainly save some $$$!!!!

Jerggy13 · 11-13-2013, 02:24 AM

Shop Peel & Seal 6-in x 300-in Aluminum Flashing at Lowes.com

Nice! I am going to pick some up.

Zbrah · 11-15-2013, 03:37 PM

Excellent idea on the peel & seal stuff! Thanks for sharing this!

Chuck33079 · 11-15-2013, 03:51 PM

It may smell a bit when it gets hot. It's asphalt based as opposed to butyl rubber. If you want the best bang for your buck, after you put on a layer of this, put a layer of closed cell foam on top of it. I used Ensolite. It's cheap and self adhesive. Adding the foam makes the deadened work so much better.

09-29-2013, 01:16 PM	#32 (permalink)
NickTurnon A True Z Fanatic Join Date: Jul 2011 Location: Scottsdale Age: 33 Posts: 1,636 Drives: 09 BS 7AT 370z Rep Power: 17	Debating creating a DIY for this because I am not 100% sure on how long they will last compared to the FRP material, or the fiberglass ones created by professional companies.. I took a stroll thru Home Depot yesterday (Sat.) and decided to look at different types of materials that could be used for side blades/skirts. The ones online & offered by sponsors are anywhere from $250-400 for basic side blades. I ended up spending about 4-5 hours worth of my time on these, but for the $$$ spent, I could care less if they lasted a few months. If you guys want a little write-up, I can do it. & post more pics. But here are the custom side skirts.. I will probably get so flamed for this. Shadezz, DatsunFTW and carlitos_370z like this. __________________ 2009 Brilliant Silver BASE 7AT \| TEIN S-Tech Springs \| K&N Drop Ins & z1 Maf Tubes \| AAM S-Line Short Tails \| 5% Tint \| 20MM Spacers \| Sport Spoiler NickTurnon's 370z Build

09-30-2013, 09:31 AM	#34 (permalink)
NickTurnon A True Z Fanatic Join Date: Jul 2011 Location: Scottsdale Age: 33 Posts: 1,636 Drives: 09 BS 7AT 370z Rep Power: 17	I made a DIY for you guys carlitos! DIY: Side Blades/Skirts carlitos_370z likes this. __________________ 2009 Brilliant Silver BASE 7AT \| TEIN S-Tech Springs \| K&N Drop Ins & z1 Maf Tubes \| AAM S-Line Short Tails \| 5% Tint \| 20MM Spacers \| Sport Spoiler NickTurnon's 370z Build

10-15-2013, 11:49 AM	#35 (permalink)
NickTurnon A True Z Fanatic Join Date: Jul 2011 Location: Scottsdale Age: 33 Posts: 1,636 Drives: 09 BS 7AT 370z Rep Power: 17	Snapped a decent photo with my S3 today after I washed it - Showing off the side skirts. njustidokite, carlitos_370z and SilverValk01 like this. __________________ 2009 Brilliant Silver BASE 7AT \| TEIN S-Tech Springs \| K&N Drop Ins & z1 Maf Tubes \| AAM S-Line Short Tails \| 5% Tint \| 20MM Spacers \| Sport Spoiler NickTurnon's 370z Build

10-19-2013, 03:19 PM	#37 (permalink)
NickTurnon A True Z Fanatic Join Date: Jul 2011 Location: Scottsdale Age: 33 Posts: 1,636 Drives: 09 BS 7AT 370z Rep Power: 17	Lets face it, the 370z is loud inside the car. Especially when you have short tails. I saw the offers for GTMat on the forum and didn't jump on it. I looked up prices for Dynamat, SecondSkin, etc.. and found that they were $$$. After a bit of research I found a product called Peel & Seal. I can write up a DIY if people are interested. Anyways, I paid $16.99 for 25 ft of it. (I got 2)= $34 First things first, was I read the DIY on how to remove the rear panels. Everything came out really easily. I had the rear gutted in less then 10 minutes. Didn't realize how large it was without the foam pieces and panels. I took it out for a road test without anything in the trunk and WOW, its like a giant rattle can. Especially when I was downshifting haha! Sorry about the Red lines...Not sure what happened there. I tried to get the whole back area as much as possible without going overboard. It took about a roll and a half to do the rear and middle cubby area. I then did a couple of road tests and realized I needed to do the door panels. I heard a lot of sound coming from the doors. Door panels are super easy to remove. Just need a little flathead screwdriver, a large philips, and a 10mm socket. Both doors took about a half a roll. (10-13 feet worth). Impressions: Road noise has gone down a bit. I stopped hearing little rocks and stuff under the wheel wells. No smell like some people stated. When applying, you will smell the tar/rubber stuff. Exhaust sounds better. Speakers sound like they are easier to hear and less rattle. Overall I am very pleased. It was a fun project and I would recommend it to anyone. Apparently this Peel & Seal stuff works almost identically to dynamat. The main differences are the thickness and probably what its made of. Also peel and seal is not made for sound deadening. Its made for roofers. Good luck to anyone that wants to try this out! I can answer any questions Zbrah and Riptide67 like this. __________________ 2009 Brilliant Silver BASE 7AT \| TEIN S-Tech Springs \| K&N Drop Ins & z1 Maf Tubes \| AAM S-Line Short Tails \| 5% Tint \| 20MM Spacers \| Sport Spoiler NickTurnon's 370z Build

11-12-2013, 11:24 PM	#42 (permalink)
Riptide67 A True Z Fanatic Join Date: Jul 2013 Location: Oak Harbor, WA Age: 36 Posts: 1,610 Drives: 09 Nismo #0483 PW Rep Power: 68	Great write up about the peel and seal! I checked to see if Home Depot carries it but they don't. So, I'm gonna hit Lowe's this weekend. I did some extra research online and it seems like many enthusiasts use he product on their builds. Thanks again for the recommendation. It will certainly save some $$$!!!! NickTurnon likes this. __________________ 2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana Follow me on Instagam @s3zero_z3four

08-28-2013, 12:00 PM	#31 (permalink)
taddraughn Base Member Join Date: Oct 2011 Location: ridgeland Posts: 46 Drives: 2010 370Z Black M6 Rep Power: 13	That headlight blackout makes it look so mean. Awesome work

09-30-2013, 07:14 AM	#33 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	man dont look bad for a DIY... if you want do the thread for the members who are interested on this...

10-15-2013, 12:59 PM	#36 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	looks great bro!!!

10-20-2013, 03:50 PM	#38 (permalink)
Haboob A True Z Fanatic Join Date: Aug 2012 Location: Surface of the sun. Posts: 13,159 Drives: '18 GTI Autobahn DSG Rep Power: 1386	Nicely done. I've grown used to the loud sound and don't even notice it anymore. How heavy is that material? Probably insignificant, but you never know. I remember dynamat being quite thick and heavy. Sent from my iPhone.

10-20-2013, 04:27 PM	#40 (permalink)
Haboob A True Z Fanatic Join Date: Aug 2012 Location: Surface of the sun. Posts: 13,159 Drives: '18 GTI Autobahn DSG Rep Power: 1386	Heck yeah. My buddy and I are out at the Pavs almost every weekend too. We park way away passed the Home Depot (his GTR and my Z). Won't be there this Saturday, but the following most likely. Sent from my iPhone.

10-24-2013, 07:58 AM	#41 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	nice DIY bro!!!!

11-13-2013, 02:24 AM	#43 (permalink)
Jerggy13 Track Member Join Date: Mar 2011 Location: St. Louis, MO Posts: 517 Drives: with 6 TB's Rep Power: 375	Shop Peel & Seal 6-in x 300-in Aluminum Flashing at Lowes.com Nice! I am going to pick some up. NickTurnon likes this. __________________ Changes come. Keep your dignity. Take the high road. Take it like a man. Momma Sed Like the rain. Like a kidney stone. Its just a broken heart, son. This pain will pass away.

11-15-2013, 03:37 PM	#44 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5451	Excellent idea on the peel & seal stuff! Thanks for sharing this! Riptide67 likes this.

11-15-2013, 03:51 PM	#45 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	It may smell a bit when it gets hot. It's asphalt based as opposed to butyl rubber. If you want the best bang for your buck, after you put on a layer of this, put a layer of closed cell foam on top of it. I used Ensolite. It's cheap and self adhesive. Adding the foam makes the deadened work so much better. NickTurnon likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking to build your 370z?	Marti	Sponsor Classifieds	46	05-22-2014 07:42 PM
Our first 370Z build.	Jeff Smith	Audio & Video	68	04-15-2011 06:36 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM
Build your own - 370Z	4MYZ370	Nissan 370Z Pricing / Ordering Discussions	22	02-10-2009 07:35 PM