John's Sweet NA build

Navyboy916

Here is a list of cost. Be advised that I might have missed a couple of items:
1. Labor for disassembly and reassembly paid to Nissan 2900.00
2. Gtm valve train 1500.00
3. Gtm stage 1 heads 2000.00
4. Gtm torque converter 625.00
5. Gtm HD flex plate 435.00
6. JUN exhaust cams 650.00
7. Cosworth head gaskets 315.00
8. ARP L19 headstuds 529.00
9 Z1 engine and transmission mounts 400.00
10. Stillen transmission cooler 329.00
11. NST pulley set 250.00

All these parts were added at the same time during the reinstall. I had all the bolt on before the motor build so the bolt on parts are not listed.
The total time was about 6 months due to shipping and GTM backlog of work at the time and reassembly of the engine back in the car. I am missing all the shipping cost for the heads and the torque converter cause from Guam it was ridiculous. This is a basic idea of the cost I had for this build. A lot of small cost r not included either. The dealership also replace both VVEL actuators under warranty just to match them with the new heads. That was a hookup. If I think of anything else I will will update this post. So far I haven't had any problems at all. The engine is so much louder then before and u can hear the cams due to the larger duration of the cams. Next upgrade is going to be the transmission valve body in increase the line pressure safely throughout the transmission.