Nut_N_Much Journal

king12sky · 11-11-2012, 05:33 PM

whoever is making the mold has to remake it. FRP mold will wear over time so im sure that the mold they used is "out of shape" alrdy.

Zoren 370 · 11-11-2012, 05:42 PM

Joe why not set a Z Tampa meet in your place to baptize that new Beast Z project of yours when done.

Nut_N_Much · 11-12-2012, 08:50 AM

Got the car buttoned up this morning. Will drive

it this week, then remove and paint to color match the car.. Hoping the fender cracks before paint if its going too. Here are some pics of the fenders on. This is nothing new for the forum, just another set of vented fenders that fit like A_ S!

Enjoy...

Visit my album for more pics.. Rep if you like!!! Thanks

Nissan 370Z Forum - Nut_N_Much's Album: Fenders

Nut_N_Much · 11-12-2012, 09:33 AM

Just got my Dyno Time Scheduled for Next Saturday. Looks like I can start the install this week.. Can't wait.. Still waiting on gauges, and trying to figure out were the trans cooler lines go. Everything should be gtg.

I talked to the tuner about line pressures, there is a guy on this forum that used him to data log and dial in the line pressures. He has had no issues since. I saw him do 15 pulls on Kellys car to get his dialed in so I am comfortable using him. Hate the shop but the tuner is the best in South Florida and doesn't want his name associated with a bad tune.

So another project, then we will get back to learning how to Carbon Fiber everything on & in the car

.

Nut_N_Much · 11-12-2012, 05:22 PM

Okay, I am going to take a ton of pictures and log the hole install in a DIY. KellyFields sent me this link today 370Z Stillen supercharger DIY instructions wortmeister did an awesome job and re-wrote the Stillen Instructions to account or issue he worked though during his install.

This is were I'm at right now. COGs on, Impeller in, Intake painted K51 to match the car, just doesn't look dark enough.

Using this to make a brace that keeps the mounting plate from flexing.. I call it the Osiris Design. Once I get it aligned I'll mark the pulley and mill it down at the machine shop to make some clearance between the fender and the face of the pulley.

11-11-2012, 05:33 PM	#1 (permalink)
king12sky Enthusiast Member Join Date: May 2012 Location: LAKELAND, FLORIDA Posts: 280 Drives: M4, GTI, EVOQUE Rep Power: 15	whoever is making the mold has to remake it. FRP mold will wear over time so im sure that the mold they used is "out of shape" alrdy. Nut_N_Much likes this. __________________ Amplified Motorsports \| LTMW \| Zele \| Rays \| Gramlights \| M7 Japan \| AP Racing \| Takeda \| Whitelines \| CFE \| Motordyne \| SPL \| R40 \| Avery \| 3M

11-11-2012, 05:42 PM	#2 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913655	Joe why not set a Z Tampa meet in your place to baptize that new Beast Z project of yours when done. Nut_N_Much likes this.

11-12-2012, 08:50 AM	#3 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Update Fenders Got the car buttoned up this morning. Will drive it this week, then remove and paint to color match the car.. Hoping the fender cracks before paint if its going too. Here are some pics of the fenders on. This is nothing new for the forum, just another set of vented fenders that fit like A_ S! Enjoy... Visit my album for more pics.. Rep if you like!!! Thanks Nissan 370Z Forum - Nut_N_Much's Album: Fenders Mr&Mrs and otacon88 like this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

11-12-2012, 09:33 AM	#4 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Shifting gears to Super Charger Just got my Dyno Time Scheduled for Next Saturday. Looks like I can start the install this week.. Can't wait.. Still waiting on gauges, and trying to figure out were the trans cooler lines go. Everything should be gtg. I talked to the tuner about line pressures, there is a guy on this forum that used him to data log and dial in the line pressures. He has had no issues since. I saw him do 15 pulls on Kellys car to get his dialed in so I am comfortable using him. Hate the shop but the tuner is the best in South Florida and doesn't want his name associated with a bad tune. So another project, then we will get back to learning how to Carbon Fiber everything on & in the car . __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

11-12-2012, 05:22 PM	#5 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Okay, I am going to take a ton of pictures and log the hole install in a DIY. KellyFields sent me this link today 370Z Stillen supercharger DIY instructions wortmeister did an awesome job and re-wrote the Stillen Instructions to account or issue he worked though during his install. This is were I'm at right now. COGs on, Impeller in, Intake painted K51 to match the car, just doesn't look dark enough. Using this to make a brace that keeps the mounting plate from flexing.. I call it the Osiris Design. Once I get it aligned I'll mark the pulley and mill it down at the machine shop to make some clearance between the fender and the face of the pulley. Osiris likes this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 03:30 PM
PG6Speeds Journal	pg6speed	Member's 370Z Gallery	19	12-21-2011 10:21 PM
Cmike2780's Journal	Cmike2780	Member's 370Z Gallery	9	06-29-2011 11:17 PM
tag journal with car color	bflosabre91	The370Z.com Feedback, Suggestions & Questions	1	05-12-2011 12:46 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM