Rusty's Nismo Journal

Rusty · 09-26-2017, 07:44 PM

Forgot about the switches.
The left switch is for the YAW sensor. Blue light.
The top knob between the gauges is a dimmer for the lights in the gauges.
The next switch down is for the diff oil pump. Red light.
And the bottom switch is for the diff oil fan. Red light.

Spartan 1771 · 09-26-2017, 08:51 PM

Quote:

Originally Posted by Rusty

Forgot about the switches.
The left switch is for the YAW sensor. Blue light.
The top knob between the gauges is a dimmer for the lights in the gauges.
The next switch down is for the diff oil pump. Red light.
And the bottom switch is for the diff oil fan. Red light.

VERY nice!

Rusty · 09-29-2017, 02:15 PM

Seen the surgeon today. No more brace!

BUT no lifting with that arm for awhile. The only time I'm to lift with it is at rehab. The arm is tired just from walking around without the brace.

Now maybe, I can make some progress on the Nismo.

Hotrodz · 09-29-2017, 02:19 PM

Quote:

Originally Posted by Rusty

Seen the surgeon today. No more brace!

BUT no lifting with that arm for awhile. The only time I'm to lift with it is at rehab. The arm is tired just from walking around without the brace.

Now maybe, I can make some progress on the Nismo.

Nice...don't over do it lol!

Sent from my SM-N910P using Tapatalk

Rusty · 09-29-2017, 02:22 PM

Quote:

Originally Posted by Hotrodz

Nice...don't over do it lol!

Sent from my SM-N910P using Tapatalk

That's my middle name.

cv129 · 09-30-2017, 01:53 PM

Quote:

Originally Posted by Rusty

Forgot about the switches.
The left switch is for the YAW sensor. Blue light.
The top knob between the gauges is a dimmer for the lights in the gauges.
The next switch down is for the diff oil pump. Red light.
And the bottom switch is for the diff oil fan. Red light.

Got a switch for nuke missles? Lol

Rusty · 10-02-2017, 07:20 PM

Looking back through this thread. I don't have any pictures of my ATI damper installed. So here is 2.

Rusty · 10-05-2017, 09:37 PM

Figured out my wiring behind the cubby for the gauges and switches. I can't run a switch with a light in it for the YAW sensor like I wanted to.

So the wiring is done behind the gauges and switches. I'm trying to make this plug and play. If I have to remove the cubby in the future. All I have to do is unplug a couple of connectors.

1st pic is the backside of the cubby completed.
2nd pic is of the connection bar and relays for the diff pump and diff fan. This will be mounted to the dash.

Hotrodz · 10-06-2017, 10:22 AM

Quote:

Originally Posted by Rusty

Figured out my wiring behind the cubby for the gauges and switches. I can't run a switch with a light in it for the YAW sensor like I wanted to.

So the wiring is done behind the gauges and switches. I'm trying to make this plug and play. If I have to remove the cubby in the future. All I have to do is unplug a couple of connectors.

1st pic is the backside of the cubby completed.
2nd pic is of the connection bar and relays for the diff pump and diff fan. This will be mounted to the dash.

Great job, nice and clean!

Sent from my SM-N910P using Tapatalk

JLarson · 10-24-2017, 07:48 AM

Quote:

Originally Posted by Rusty

Looking back through this thread. I don't have any pictures of my ATI damper installed. So here is 2.

Rusty, how do you like this as a mod? I see from the specs that it's about 4% underdriven (if I'm reading the table correctly); would you say there is a noticeable improvement in performance from this item?

Rusty · 10-24-2017, 10:55 AM

Quote:

Originally Posted by JLarson

Rusty, how do you like this as a mod? I see from the specs that it's about 4% underdriven (if I'm reading the table correctly); would you say there is a noticeable improvement in performance from this item?

Tell you the truth. I can't tell the difference. I got it to help the stock oil pump live at high rpm's.

Rusty · 10-31-2017, 11:56 AM

Here's a link to my install of the rear SPL suspension parts.

Traction arms, Camber arms. Lock-out bolts, Knuckle monoball bushings.

The Complete SPL Rear Suspension (Almost)

09-29-2017, 02:15 PM	#3 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,571 Drives: 2011 Nismo GM 6M Rep Power: 2684440	Seen the surgeon today. No more brace! BUT no lifting with that arm for awhile. The only time I'm to lift with it is at rehab. The arm is tired just from walking around without the brace. Now maybe, I can make some progress on the Nismo. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 03:30 PM
birdmanx1's Nismo Journal ...	birdmanx1	Member's 370Z Gallery	441	10-20-2012 03:47 PM
TROOPER's 370Z NISMO Journal	TROOPER	Member's 370Z Gallery	124	07-29-2011 09:17 AM
[Equinox] Nismo dyno progression journal	Equinox	Engine & Drivetrain	3	02-17-2011 03:11 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM