Rusty's Nismo Journal

Rusty · 10-14-2019, 09:16 PM

Quote:

Originally Posted by redondoaveb

is right. Damn that's a lot of rubber. I bet they could even handle boost

The same size as I have on the rear now. But with more grip.

gbrettin · 10-12-2019, 07:59 PM

Rusty, you have an amazing car!

Rusty · 10-12-2019, 08:00 PM

Quote:

Originally Posted by gbrettin

Rusty, you have an amazing car!

Thank you!

Can't wait to see your's done.

Hotrodz · 02-26-2020, 08:14 PM

Love the color!

Sent from my SM-G965U using Tapatalk

Spartan 1771 · 02-27-2020, 10:14 AM

Those are the exact cans I have. I added a small rubber o-ring around the dipstick and the top bolt (which you'll use if you don't use the breathers). The ring helped to seal those areas properly. I also put a small amount of steel wool inside of the small baffle.

Nissan 370Z Forum - Spartan 1771's Album: Dual Oil Catch Cans

Rusty · 02-27-2020, 10:50 AM

Quote:

Originally Posted by Spartan 1771

Those are the exact cans I have. I added a small rubber o-ring around the dipstick and the top bolt (which you'll use if you don't use the breathers). The ring helped to seal those areas properly. I also put a small amount of steel wool inside of the small baffle.

Nissan 370Z Forum - Spartan 1771's Album: Dual Oil Catch Cans

Rusty · 02-27-2020, 03:35 PM

Quote:

Originally Posted by Spartan 1771

Those are the exact cans I have. I added a small rubber o-ring around the dipstick and the top bolt (which you'll use if you don't use the breathers). The ring helped to seal those areas properly. I also put a small amount of steel wool inside of the small baffle.

Nissan 370Z Forum - Spartan 1771's Album: Dual Oil Catch Cans

What size AN fittings and hose did you use?

redondoaveb · 02-27-2020, 03:54 PM

Quote:

Originally Posted by Rusty

What size AN fittings and hose did you use?

My SOHO kit use's 8's and 10's if that helps any.

BettyZ · 02-29-2020, 11:54 AM

Quote:

Originally Posted by Rusty

What size AN fittings and hose did you use?

The fitting angles can be tricky, I went through half a dozen iterations before I was satisfied.

Sent from my SM-G955U using Tapatalk

Spartan 1771 · 03-02-2020, 12:14 PM

Quote:

Originally Posted by Rusty

What size AN fittings and hose did you use?

Here are the hoses I used:

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

BettyZ · 03-02-2020, 03:59 PM

Quote:

Originally Posted by Spartan 1771

Here are the hoses I used:

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Rusty is only interested in man-hose.

Sent from my SM-G955U using Tapatalk

Rusty · 03-21-2020, 08:32 PM

Finished my oil catch cans today. I used left over stainless -8AN hose I had from my diff cooler project. If anyone wanted to use the same Espeeder catch cans with brained -8AN hose. The fitting that screws into the can is a 16mmx 1.5 thread. I got mine from Jegs.

https://www.jegs.com/i/Earls/361/AT9919EFJERL/10002/-1

gbrettin · 02-27-2020, 11:22 AM

Motion Raceworks catch can is really nice for the price. Check that out!

BGTV8 · 02-27-2020, 01:49 PM

At 300ml each they are too small for motorsport use - I am required to have a 2-litre catch can.

Spooler · 02-27-2020, 02:08 PM

Quote:

Originally Posted by BGTV8

At 300ml each they are too small for motorsport use - I am required to have a 2-litre catch can.

Radium makes them if you don't already have them.

02-26-2020, 08:14 PM	#4 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Love the color! Sent from my SM-G965U using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

02-27-2020, 10:14 AM	#5 (permalink)
Spartan 1771 A True Z Fanatic Join Date: Nov 2009 Location: Western Maryland Posts: 1,279 Drives: Wife crazy & 09 370Z Rep Power: 105454	Those are the exact cans I have. I added a small rubber o-ring around the dipstick and the top bolt (which you'll use if you don't use the breathers). The ring helped to seal those areas properly. I also put a small amount of steel wool inside of the small baffle. Nissan 370Z Forum - Spartan 1771's Album: Dual Oil Catch Cans __________________ ~Rob -DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

03-21-2020, 08:32 PM	#12 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,505 Drives: 2011 Nismo GM 6M Rep Power: 2684439	Finished my oil catch cans today. I used left over stainless -8AN hose I had from my diff cooler project. If anyone wanted to use the same Espeeder catch cans with brained -8AN hose. The fitting that screws into the can is a 16mmx 1.5 thread. I got mine from Jegs. https://www.jegs.com/i/Earls/361/AT9919EFJERL/10002/-1 __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 03:30 PM
birdmanx1's Nismo Journal ...	birdmanx1	Member's 370Z Gallery	441	10-20-2012 03:47 PM
TROOPER's 370Z NISMO Journal	TROOPER	Member's 370Z Gallery	124	07-29-2011 09:17 AM
[Equinox] Nismo dyno progression journal	Equinox	Engine & Drivetrain	3	02-17-2011 03:11 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM

10-12-2019, 07:59 PM	#2 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,301 Drives: Tricycle Rep Power: 589151	Rusty, you have an amazing car!

02-27-2020, 11:22 AM	#13 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,301 Drives: Tricycle Rep Power: 589151	Motion Raceworks catch can is really nice for the price. Check that out!

02-27-2020, 01:49 PM	#14 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,516 Drives: 09 Nissan 370Z M6 Rep Power: 39974	At 300ml each they are too small for motorsport use - I am required to have a 2-litre catch can.