Rusty's Nismo Journal

onzedge · 08-09-2018, 08:12 AM

Quote:

Originally Posted by Rusty

Just screwed u the right side. Everything is good now.

Elmo370z · 08-09-2018, 06:29 PM

Thanks Russ

onzedge · 08-09-2018, 06:59 PM

Quote:

Originally Posted by Elmo370z

Thanks Russ

Rusty · 08-09-2018, 08:46 PM

Quote:

Originally Posted by Elmo370z

Thanks Russ

How do you like them?

Elmo370z · 08-09-2018, 09:47 PM

They look good. Can’t wait to install them. Got bunch more things to take care for the track before I get around to it.

Rusty · 08-09-2018, 09:59 PM

Quote:

Originally Posted by Elmo370z

They look good. Can’t wait to install them. Got bunch more things to take care for the track before I get around to it.

When you install the hood vents. The cross bar under the hood. Everyone cuts that a little different. Once you have the vents installed. Put the shield up against the bottom on the vent. Start from the back to get iy seated. Look at the front of the shield. You will see where it's hitting the cross bar. This is where you have to trim the sides of the shield back with tin snips to get the front to seat. Places marked in yellow. Then put your zip-ties up from the bottom and loop around the center bar of the vent and put it back down through the other hole. I can install all 4 of mine in about 10 minutes. The shield are designed so that the water runs towards the front of the engine. In the empty space. They will also let air flow through them too. But not as much.

onzedge · 08-24-2018, 05:43 AM

Quote:

Originally Posted by Rusty

When you install the hood vents. The cross bar under the hood. Everyone cuts that a little different. Once you have the vents installed. Put the shield up against the bottom on the vent. Start from the back to get iy seated. Look at the front of the shield. You will see where it's hitting the cross bar. This is where you have to trim the sides of the shield back with tin snips to get the front to seat. Places marked in yellow. Then put your zip-ties up from the bottom and loop around the center bar of the vent and put it back down through the other hole. I can install all 4 of mine in about 10 minutes. The shield are designed so that the water runs towards the front of the engine. In the empty space. They will also let air flow through them too. But not as much.

Rusty · 11-09-2018, 04:01 AM

100,000 views on this thread.

Never thought I would ever see that many. Guess I must be doing something right. Hopefully it's helping someone out.

Spooler · 11-09-2018, 12:29 PM

This is mostly due to you being a Baller back in the day. Since, your said status has been revoked. Hotrodz still has his status.

sx moneypit · 11-09-2018, 01:03 PM

Quote:

Originally Posted by Spooler

This is mostly due to you being a Baller back in the day. Since, your said status has been revoked. Hotrodz still has his status.

Hotrodz · 11-09-2018, 04:49 PM

Quote:

Originally Posted by Spooler

This is mostly due to you being a Baller back in the day. Since, your said status has been revoked. Hotrodz still has his status.

Rust has pulled me down the rabbit hole with him and now I am trying to get even or just a little ahead!

Sent from my SM-G965U using Tapatalk

Rusty · 11-09-2018, 07:19 PM

Quote:

Originally Posted by Hotrodz

Rust has pulled me down the rabbit hole with him and now I am trying to get even or just a little ahead!

Sent from my SM-G965U using Tapatalk

Yep!

Now I have to keep up with you in the HP dept. So I've have been working on this.

Figure it would top everyone.

Hotrodz · 11-09-2018, 07:32 PM

Quote:

Originally Posted by Rusty

Yep!

Now I have to keep up with you in the HP dept. So I've have been working on this.

Figure it would top everyone.

Snow blower strap on FTW!

Sent from my SM-G965U using Tapatalk

Rusty · 11-09-2018, 08:19 PM

Quote:

Originally Posted by Hotrodz

Snow blower strap on FTW!

Sent from my SM-G965U using Tapatalk

Snow blower to you. Leaf blower to me.

Was thinking along this line.

redondoaveb · 11-09-2018, 08:21 PM

Quote:

Originally Posted by Rusty

Yep!

Now I have to keep up with you in the HP dept. So I've have been working on this.

Figure it would top everyone.

Is that the new Whipple?

11-09-2018, 04:01 AM	#8 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,487 Drives: 2011 Nismo GM 6M Rep Power: 2684438	100,000 views on this thread. Never thought I would ever see that many. Guess I must be doing something right. Hopefully it's helping someone out. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O&G's Journal	O&G	Member's 370Z Gallery	648	02-16-2017 03:30 PM
birdmanx1's Nismo Journal ...	birdmanx1	Member's 370Z Gallery	441	10-20-2012 03:47 PM
TROOPER's 370Z NISMO Journal	TROOPER	Member's 370Z Gallery	124	07-29-2011 09:17 AM
[Equinox] Nismo dyno progression journal	Equinox	Engine & Drivetrain	3	02-17-2011 03:11 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM

08-09-2018, 09:47 PM	#5 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,727 Drives: 09 nissan 370z Sp M6 Rep Power: 295379	They look good. Can’t wait to install them. Got bunch more things to take care for the track before I get around to it.

11-09-2018, 12:29 PM	#9 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,106 Drives: 2013 Nismo 370z Rep Power: 2684394	This is mostly due to you being a Baller back in the day. Since, your said status has been revoked. Hotrodz still has his status.