Project RB-Z

AndyK. · 08-14-2011, 01:59 PM

I like where this project is going.

Dembflyr · 08-14-2011, 11:09 PM

Oh I am so in for updates!

docaam · 08-23-2011, 02:43 AM

Thanks guys,

I did some shopping while car was still at in California, bought a refurbished crossmember with new ball joints, bushings pretty much everything

Got some new Roll Center Adjusters

For anyone who dont know whats it, it rectifies a very common problem in old cars, here is some info i pulled from the Techno Toy Tuning Website.

-

Quote:

Roll Center Adjusters for 240/260/280Z

-These RCAs (Roll Center Adjusters, or Bump Steer Spacers as the 510 guys call 'em) are designed to get rid of that pesky bump steer on your lowered vehicle

-The alignment sleeves are solid milled into the unit, so they will not get lost or come off. We also added a larger alignment ring for the center of the unit, to provide even more shear protection than other RCAs on the market. These RCAs will NOT move or become mis-aligned, no matter how hard you drive.

-Comes with all mounting hardware - four new grade 8 bolts and lock washers.

Pictures sent by seller yesterday, car packed and ready to go

And finally to the port, seller had tears in his eyes while taking the picture

the_student · 08-23-2011, 03:59 AM

Man...I would be crying too if I had to sell my beauty of a car!!!

docaam · 09-22-2011, 05:17 AM

Mark and Ravespec FTW,

Wheels ordered, Works CR01 with size and offsets of 16 X 9 -17 and 16 X 9.5 -19.

Still need to cross confirm the offsets as waiting after getting the size of Wilwood BBK

Same colour and same finish

jdmlove · 09-22-2011, 06:11 AM

sorry to hear that u will sell your 370z,

good luck in your new project. why u dont go with 2JZ-GTE, am sure you will find allot of JDM Supra half cuts in Dubai!

JDM engines always clean!

with 2JZ u will not have any limits. and u wont need to Change the engine internals except for 500hp+

docaam · 09-22-2011, 07:11 AM

Quote:

Originally Posted by jdmlove

sorry to hear that u will sell your 370z,

good luck in your new project. why u dont go with 2JZ-GTE, am sure you will find allot of JDM Supra half cuts in Dubai!

JDM engines always clean!

with 2JZ u will not have any limits. and u wont need to Change the engine internals except for 500hp+

2JZ is a very nice engine but I want to keep the Nissan at heart

red6spd · 09-22-2011, 07:19 AM

Sick

b1adesofcha0s · 09-22-2011, 08:13 AM

How did I not see this thread before? Sick build Aamir, can't wait to see what you do with it!

Mike · 09-22-2011, 08:45 AM

very nice!

shika805 · 09-22-2011, 09:12 PM

aye docaam, this is zack from hybridz.org... Do you remember me? I'm the guy with the Audi Grey 240z on wats. I remember seeing this build long time ago man, always wondered how this car was going! Looks great by the way!

I'm just about to purchase a 370 soon! nice to know you have one too!

Mr&Mrs · 09-23-2011, 04:18 AM

In for updates!

docaam · 10-23-2011, 05:11 AM

Let the restoration begin!!!!!

Picture of same day car came and dropping at the workshop

Some more pictures, after looking at the car its a bit more work then expected but Im ready for the challenge

I am about to decide about the engine in next few days, now its between VQ35 or RB25DET

Kingbaby · 10-23-2011, 05:19 AM

car is practically done!

I would kill for a 240z...

not really but you get what I mean

Unique_Z · 10-23-2011, 05:48 AM

Amir, how about RB26?

08-14-2011, 11:09 PM	#17 (permalink)
Dembflyr Track Member Join Date: Feb 2010 Location: Indiana Posts: 886 Drives: G37S Sedan Rep Power: 16	Oh I am so in for updates! __________________ 2012 G37S Sedan 6MT - Project Practicality 2009-6MT-Sport/Touring-Dembflyr's Journal-TT Build Thread-CAR IS SOLD

08-23-2011, 03:59 AM	#19 (permalink)
the_student Track Member Join Date: Jun 2009 Location: bay area Posts: 522 Drives: '13 LE 4runner Rep Power: 16	Man...I would be crying too if I had to sell my beauty of a car!!! __________________ 2009 370Z PW 6MT Base/Sport/KW/PWJDM/HKS...RIP. 2011 370Z PW 6MT Base/Sport...KW V3/HKS/TE37 SL/Clear Bra

09-22-2011, 05:17 AM	#20 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 28	Mark and Ravespec FTW, Wheels ordered, Works CR01 with size and offsets of 16 X 9 -17 and 16 X 9.5 -19. Still need to cross confirm the offsets as waiting after getting the size of Wilwood BBK Same colour and same finish VDC_OFF likes this. __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

09-22-2011, 06:11 AM	#21 (permalink)
jdmlove Base Member Join Date: Jun 2010 Location: Bahrain Posts: 222 Drives: HR 350z - 07 M35X Rep Power: 14	sorry to hear that u will sell your 370z, good luck in your new project. why u dont go with 2JZ-GTE, am sure you will find allot of JDM Supra half cuts in Dubai! JDM engines always clean! with 2JZ u will not have any limits. and u wont need to Change the engine internals except for 500hp+ __________________

09-22-2011, 07:19 AM	#23 (permalink)
red6spd A True Z Fanatic Join Date: Apr 2010 Location: Long Island NY Posts: 3,277 Drives: 2010 Z Coupe M6 SPT Rep Power: 21	Sick __________________ 2010 Base+Sport 6spd: Stillen G3, FI Non-Resonated CBE, FI Non-Resonated Test Pipes, UpRev Tuned, Custom 24R Oil Cooler, JDM Rear Fog-OEM Harness. ???Whp ???WTQ (Will find out come spring time)

08-14-2011, 01:59 PM	#16 (permalink)
AndyK. Base Member Join Date: Jul 2011 Location: Millbrae Posts: 24 Drives: you. Rep Power: 13	I like where this project is going.

09-22-2011, 08:13 AM	#24 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	How did I not see this thread before? Sick build Aamir, can't wait to see what you do with it! __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

09-22-2011, 08:45 AM	#25 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	very nice! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

09-22-2011, 09:12 PM	#26 (permalink)
shika805 Enthusiast Member Join Date: Sep 2011 Location: Santa Barbara, CA Posts: 491 Drives: 40th Z, 71' 240z Rep Power: 19	aye docaam, this is zack from hybridz.org... Do you remember me? I'm the guy with the Audi Grey 240z on wats. I remember seeing this build long time ago man, always wondered how this car was going! Looks great by the way! I'm just about to purchase a 370 soon! nice to know you have one too!

09-23-2011, 04:18 AM	#27 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,190 Drives: RZ34 Rep Power: 15161	In for updates! __________________ Project Z <--Click - Check out the link too many mods to list!

10-23-2011, 05:11 AM	#28 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 28	Let the restoration begin!!!!! Picture of same day car came and dropping at the workshop Some more pictures, after looking at the car its a bit more work then expected but Im ready for the challenge I am about to decide about the engine in next few days, now its between VQ35 or RB25DET __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

10-23-2011, 05:48 AM	#30 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	Amir, how about RB26? __________________ My Z Build UniqueZ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Project	Nigel@PM	Member's 370Z Gallery	8	03-21-2011 08:38 PM
3 yrs Project... its a Z but not Z :P	CarbonSignal	Forced Induction	6	01-24-2011 03:58 PM
Take a look at my little project...	xbigb4ller69z	Brakes & Suspension	5	08-17-2010 11:46 AM
Looking for a project car.	bigaudiofanat	The Lounge (Off Topic)	19	07-03-2010 10:14 PM
512 Project - ATX	theDreamer	Texas	20	06-28-2010 09:01 AM