Spohn's Journal

SPOHN · 04-08-2012, 09:30 AM

Quote:

Originally Posted by Mike

Looking good Chris! The boys at Autoglo definitely do a thorough job.

I got my brake cooling kit halfway installed. Still working on the passenger side and having a little trouble with the metal support wire in one of the hoses so I need a new one to finish the job. Plus I've got a small leak in my power steering cooling lines I have found, so I need to work on that. Car will be in the air on jackstands a few weeks I think.

I'd like to buy the power steering cooler kit. Was the leak due to rubbing or at a connection point?

The ducting is tight. Took my dad and I to menipulate without damaging. I'd almost feel better about grinding the wheel well out a bit. But it's done now.

Baer383 · 04-08-2012, 09:36 AM

Quote:

Originally Posted by simota1

what is the correct way to mold fiberglass to aluminum? using the mat? and fiberglass gel or something else?

Panel bond adhesive made by 3M part# 8115

3M 8115 - 3M Automix Panel Bonding Adhesive - Overview - SummitRacing.com

simota1 · 04-08-2012, 09:40 AM

Quote:

Originally Posted by Baer383

Panel bond adhesive made by 3M part# 8115

3M 8115 - 3M Automix Panel Bonding Adhesive - Overview - SummitRacing.com

so cut the hood exactly like the vents and glue it on with that stuff? it will never separate right?

rep btw

sorry spohn for thread jacking

Mike · 04-08-2012, 09:41 AM

Quote:

Originally Posted by SPOHN

I'd like to buy the power steering cooler kit. Was the leak due to rubbing or at a connection point?

The ducting is tight. Took my dad and I to menipulate without damaging. I'd almost feel better about grinding the wheel well out a bit. But it's done now.

I'm not sure, its just a slight seep where the hose connects to the hard pipe, but that hard pipe is bent some, not quite kinked, but almost and has a gouge out of it. I think its leftover from my wreck at VIR. I will probably replace all of the hardline with flexible line and reroute it to get a little more room. Might even move the cooler to the side grill opening in my bumper if I can figure out an easy way.

SPOHN · 04-08-2012, 09:52 AM

Quote:

Originally Posted by simota1

so cut the hood exactly like the vents and glue it on with that stuff? it will never separate right?

rep btw

sorry spohn for thread jacking

Dude don't worry about that. I don't care.

Quote:

Originally Posted by Mike

I'm not sure, its just a slight seep where the hose connects to the hard pipe, but that hard pipe is bent some, not quite kinked, but almost and has a gouge out of it. I think its leftover from my wreck at VIR. I will probably replace all of the hardline with flexible line and reroute it to get a little more room. Might even move the cooler to the side grill opening in my bumper if I can figure out an easy way.

Yea for sure. When running my brake duct the PS hard lines were somewhat in the way. I'm not sure why they are even there. The PS lines go from rubber to hard then back to rubber. So why not remove the hardlines and go all rubber or braided that can flex around each other. Plus the PS hard lines have two brakets that get in the way also

Baer383 · 04-08-2012, 09:54 AM

Quote:

Originally Posted by simota1

so cut the hood exactly like the vents and glue it on with that stuff? it will never separate right?

rep btw

sorry spohn for thread jacking

I'm the one that told Chris they should use this,this is what OEM manufacturers use to bond door skins,some quarter panels and bed sides.

This stuff will glue your azz to the floor and you will never get up.

SPOHN · 04-08-2012, 09:57 AM

Quote:

Originally Posted by Baer383

I'm the one that told Chris they should use this,this is what OEM manufacturers use to bond door skins,some quarter panels and bed sides.

This stuff will glue your azz to the floor and you will never get up.

I knew you were missing hair off your butt for some reason.

GaleForce · 04-08-2012, 09:59 AM

Quote:

Originally Posted by SPOHN

I knew you were missing hair off your butt for some reason.

simota1 · 04-08-2012, 10:00 AM

Quote:

Originally Posted by Baer383

I'm the one that told Chris they should use this,this is what OEM manufacturers use to bond door skins,some quarter panels and bed sides.

This stuff will glue your azz to the floor and you will never get up.

that is what im talking about man!!!!!

you gave me hope that maybe a Body shop out here can do it... so use that 3m stuff to glue it together how do i blend the edges bondo? will it crack in the future?

Baer383 · 04-08-2012, 10:10 AM

Quote:

Originally Posted by simota1

that is what im talking about man!!!!!

you gave me hope that maybe a Body shop out here can do it... so use that 3m stuff to glue it together how do i blend the edges bondo? will it crack in the future?

When the panel bond adhesive dries(about 8hrs.)you can grind it down and even sand it,then use can use either 3m part # 5887 plastic repair or bondo to fill it in,keep in mind that once these 2 parts are installed (vents and hood)with the 8115 it doesn't move so use can use bondo or 3M 5887 to finish it.

KaienZ34 · 04-08-2012, 11:46 AM

Quote:

Originally Posted by Baer383

When the panel bond adhesive dries(about 8hrs.)you can grind it down and even sand it,then use can use either 3m part # 5887 plastic repair or bondo to fill it in,keep in mind that once these 2 parts are installed (vents and hood)with the 8115 it doesn't move so use can use bondo or 3M 5887 to finish it.

Repped

simota1 · 04-08-2012, 02:56 PM

Quote:

Originally Posted by Baer383

When the panel bond adhesive dries(about 8hrs.)you can grind it down and even sand it,then use can use either 3m part # 5887 plastic repair or bondo to fill it in,keep in mind that once these 2 parts are installed (vents and hood)with the 8115 it doesn't move so use can use bondo or 3M 5887 to finish it.

did i mention i love you?

Baer383 · 04-08-2012, 05:09 PM

Quote:

Originally Posted by simota1

did i mention i love you?

I love you too simota

EventHorizoN · 04-09-2012, 02:18 AM

the car is looking fresh man!

ValidusVentus · 04-09-2012, 08:08 PM

Gotta say, looks awsome man. Your giving me ideas and making me jealous at the same time haha. Thanks for keeping us all up to date.

04-09-2012, 08:08 PM	#585 (permalink)
ValidusVentus Enthusiast Member Join Date: Jun 2011 Location: Washington State Posts: 400 Drives: #18 Z34 Rep Power: 24	Gotta say, looks awsome man. Your giving me ideas and making me jealous at the same time haha. Thanks for keeping us all up to date. __________________ Mods: Dedicated caged track car, lots of things. \|\|\| Valkyrie Autosport \|\|\|

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Holliday's Journal	Holliday	Member's 370Z Gallery	29	12-18-2011 08:26 AM
CrazyBeasty's Z34 Journal	crazybeasty	Member's 370Z Gallery	55	06-30-2011 06:31 PM
Z BEST Journal	Z BEST	Member's 370Z Gallery	26	01-09-2011 03:19 PM
tao168's Journal	tao168	Member's 370Z Gallery	12	06-14-2010 08:19 AM
fairladyZ34's Journal	fairladyZ34	Member's 370Z Gallery	4	05-08-2010 06:10 PM

04-09-2012, 02:18 AM	#584 (permalink)
EventHorizoN Enthusiast Member Join Date: Apr 2010 Location: Burbank Posts: 381 Drives: 2013 Audi S4 Quattro Rep Power: 17	the car is looking fresh man!