Surfdog’s 71 240

SurfDog

More repair panels!!


I may not need them all. They are prototypes!

__________________
09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

SurfDog

Many times harder than it should have been due to my basic baffonary.

__________________
09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

Rusty

Did you put the grease fittings in the correct position? They have to be under the compression side side of the yoke.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

gbrettin

"Many times harder than it should have been due to my basic baffonary."

That statement hit real close to home for me.

SurfDog

Heads are being cleaned and block bored and checked. I should be able to start motor building in a few weeks!

__________________
09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

SurfDog

Covid stopped the world but we’ll begin body panel replacement and wheel flare building this week. Also my bored block is back from the machine shops as well as my balanced crank and heads with mild cam. I’ll start building the motor in a week or two.

My hood was pretty bad so after months this beautiful thing has arrived.



I’ll probably put about 10k into body work to make her way better than new. That will include a full SCCA type cage.

The parts bin is just about complete. This body work has been in line for several months. It’s good to have it rolling again.

__________________
09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

madwi

Glad things are moving forward. That hood is sexy.

Rusty

I was in the Denver area a couple days ago seeing family. I wanted to catch up with you. But got busy.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

SurfDog

Ordered nice rear spoiler to match sweet hood.

__________________
09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

SurfDog

Floor pans in, rust holes out!!!!

__________________
09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

danegrey

looking all good......
nice job

__________________
Lots of Changes
the Z needs to be driven and driven hard for the car lives for it

Rusty

Rust is a major headache.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

SurfDog

Mostly done with body work. Need to pull the front right corner straight.

Fabbing up the fuel cell mount bracket.

Picked up roll bar steel this morning.

__________________
09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

Rusty

You're this far into the chassis. Just as well to seam weld now.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

gbrettin

Hey man, this might be of interest to you: