Mr. G. Brettin's Slow Motion Leg Hump

gbrettin · 05-07-2021, 08:49 AM

I was hung up last night on using huge square aluminum stock I picked up for an oil collector. After chatting with a buddy, we landed on using round stock. -10 bungs will be welded to both ends and the center will have a -10 which points downward. The entire collector is about 2' long with the hole directly in the middle.

After the length of the oil collector was figured out I could cut my oil drains. Looks like I bought enough -10 hose to wrap up the collector to the scavenger. Not sure I will have enough from scavenger to pan. We'll see.

I'm going to put an inline oil filter to the scavenger pump. Well, because I don't trust the oil coming out of the turbo and then going through an expensive pump and then going into my expensive engine. I probably should also hook a gauge post pump so I can see flow or if the pump stops working. Hmmm.

Turbowerx link:
http://www.turbowerx.com/page8/page9/page9.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Racing in Slow Motion IV	MightyBobo	The Lounge (Off Topic)	4	03-12-2013 08:12 PM
Racing In Slow Motion IV	Robert_K	The Lounge (Off Topic)	1	07-13-2012 11:01 AM
Slow shipping slow response slow everything	thispecialk	Nissan 370Z General Discussions	15	11-01-2010 08:23 PM
Racing in Slow Motion	MightyBobo	The Lounge (Off Topic)	2	12-17-2009 03:27 PM
IIHS Small Car Test: Three Gruesome Slow-Motion Crash Videos	AK370Z	Other Vehicles	13	04-15-2009 09:42 AM

05-07-2021, 08:49 AM	#1 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,304 Drives: Tricycle Rep Power: 589452	I was hung up last night on using huge square aluminum stock I picked up for an oil collector. After chatting with a buddy, we landed on using round stock. -10 bungs will be welded to both ends and the center will have a -10 which points downward. The entire collector is about 2' long with the hole directly in the middle. After the length of the oil collector was figured out I could cut my oil drains. Looks like I bought enough -10 hose to wrap up the collector to the scavenger. Not sure I will have enough from scavenger to pan. We'll see. I'm going to put an inline oil filter to the scavenger pump. Well, because I don't trust the oil coming out of the turbo and then going through an expensive pump and then going into my expensive engine. I probably should also hook a gauge post pump so I can see flow or if the pump stops working. Hmmm. Turbowerx link: http://www.turbowerx.com/page8/page9/page9.html