My 2010 Sport

Zingston · 12-06-2018, 11:26 AM

Quote:

Originally Posted by sirnixalot

Yeah, the company running it (just a small group of racers) is hoping they get first offer at purchasing the land or continuing the lease once the current lease is up.

Since the car is going no where I've gone ahead and done the CJM mod's to the fuel pump holder and installed the Walbro 450. Will put that back in the tank this weekend.

I am trying to get the financing secured to add a garage onto my house so fingers crossed I can get through with that so I have and area to do all this major work.

Engine to swap, hot pipes to build, entire exhaust to build, fuel system to install, turbo's to install.

Hope that track can be saved! Otherwise it's what? AutoX in parking lots?

sirnixalot · 12-06-2018, 01:16 PM

Autox has died out, we finally ran out of places to do it. There is another drag racing association that got a gov lease on some land but they are too busy **** measuring to produce any results.

sirnixalot · 12-07-2018, 10:22 AM

Out with the old!

In with the new CJ-M hotness! Walbro 450 and their return stuff installed. I have managed to send the clips for the spring rods to another dimension so I need to mod some small plastic bushings to fit before I can reassemble everything.

Charles tossed in a U fitting and quick connect fitting for free when I told him I was adding a flex fuel sensor. Can't go wrong with both the quality of the parts and the customer satisfaction

I'm imitating this setup having the sensor on the return.
Flex fuel kit

sirnixalot · 12-12-2018, 08:02 AM

Placed an order with AAM for their stage 1 short block! I didn't see the need for the Carillo's since I am not looking for any more loss of traction that the GTR turbo's can provide.

So while I wait for it to be built I've got my Z1 cart plum full and waiting to destroy whatever christmas bonus comes my way

ARP 19 head studs
Z1 valve stem seals
Z1's OEM timing chain kit with all the add on's
JWT C2 exhaust cam kit

I sourced the full OEM gasket kit from Husam

sirnixalot · 12-13-2018, 07:06 AM

Finished up the fuel pump assembly last night.

Relocating the car so we can start pulling the motor out, only to put it back in to finish all the fab work.

wideglideleon · 12-13-2018, 11:19 AM

That is one sexy looking fuel pump assembly.

sirnixalot · 12-14-2018, 04:53 PM

Got the cylinder heads from Elmo370z

They are on their way to AAM for them to bolt onto the short block.

Can't wait to get this thing back on the road

sirnixalot · 12-22-2018, 03:49 PM

Figured I'd go overboard while waiting for everything to arrive.

Tig welded a -4AN male fitting onto the actuators. 35 amps and someone pouring water on the actuator can the whole time. Pressure tested and all is well.

sirnixalot · 12-27-2018, 07:09 AM

Got some work done on boxing day. The front end is off and the harness is disconnected from the engine. I'm making an engine hoist adapter later so this weekend I can pull the motor out and get it on the stand.

Plan is to bolt up the turbo's and do what plumbing mock ups i need to on the stand, then put the broken motor back in and the front end back on to sort the intercooler piping and at least get the down pipes done.

Sexy CJ-Motorsport rails and the Bosch EV14's

Got the fuel regulator mounted up as well

sirnixalot · 12-28-2018, 02:25 PM

most overkill engine hoist bracket award goes to!

We pulled a vq25 out of a skyline with a much lighter duty bracket using only the 2 intake manifold studs. Thinking i might add some side pieces to use 4 more bolts though.

sirnixalot · 12-28-2018, 03:14 PM

Saw concept Z was having 10% off aftermarket soooooooooo

JWT C2 exhaust cam kit ordered and shipping to AAM

sirnixalot · 12-30-2018, 05:34 PM

Got the engine out today and started the mock up for the plumbing. I ordered the oil lines way too short so I'll have to get the correct length. The block coolant drain plugs are bspt. I'll be welding some 6an bungs to those tomorrow and drilling a hole through them to supply the turbos with coolant.

It's a snug fit in here to say the least, I'll be cutting a quarter inch off the intake adapter so I can start the bend farther back, welding is the only option i see here

sirnixalot · 12-31-2018, 11:00 AM

Welded up the coolant fittings, I still need to hit them with a wire wheel to take off the burnt zinc coating

sirnixalot · 12-31-2018, 11:09 PM

Fittings cleaned up

Used a counter sink bit to taper the inlet

Proof of concept. I will be using a 6AN Tee with a female on the adapter side so a 90* can go to the passenger turbo and a 45* or 60* can go down to the drivers side.

A shot of the water feed and oil drain. The turbo feed line I ordered was about 8" too short. I'm ordering a 36" line since this is a 27". The upper coolant port uses a 180* fitting to point under the manifold and up the back of the block.

Passenger side, what a tight fit. I had to cut off a piece of the compressor housing casting to clear the 90* fitting. A 120* might work better.

Here's a shot from underneath showing that line

Actuator mounting mod after clocking the compressor housing clockwise

Tomorrow I MIGHT see about pushing the motor back in the bay. If I can do that then its hot side and intake piping time

sirnixalot · 01-01-2019, 07:12 PM

Got the broken engine with the turbos on back in along with the radiator support, intercooler and cold side piping.

This bracket that the wiring harness clips to will need trimming to run the intake for the passenger side

I need to adjust the compressor housing clockwise a small amount but the hot side piping is pretty simple. There is no way in hell i can fit an intake to run the way i want to run it without converting to the newer low side ac line. I also need a lower profile fitting than that big *** -12AN off the coolant adapter plate. I have a 1/2" NPT to 3/4" hose barb in the summit cart

I'm gonna have to bend the newer low side ac line up a bit and fire sleeve it as well.

I'm having a well deserved day off tomorrow with my son, thursday I'll be tack welding the hot side piping together and confirming fitment.

I also need to get my VVEL ladders off to AAM next week as well so they can bolt everything down with the C2's

12-06-2018, 01:16 PM	#62 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Autox has died out, we finally ran out of places to do it. There is another drag racing association that got a gov lease on some land but they are too busy **** measuring to produce any results. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

12-07-2018, 10:22 AM	#63 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Out with the old! In with the new CJ-M hotness! Walbro 450 and their return stuff installed. I have managed to send the clips for the spring rods to another dimension so I need to mod some small plastic bushings to fit before I can reassemble everything. Charles tossed in a U fitting and quick connect fitting for free when I told him I was adding a flex fuel sensor. Can't go wrong with both the quality of the parts and the customer satisfaction I'm imitating this setup having the sensor on the return. Flex fuel kit wideglideleon likes this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

12-12-2018, 08:02 AM	#64 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Placed an order with AAM for their stage 1 short block! I didn't see the need for the Carillo's since I am not looking for any more loss of traction that the GTR turbo's can provide. So while I wait for it to be built I've got my Z1 cart plum full and waiting to destroy whatever christmas bonus comes my way ARP 19 head studs Z1 valve stem seals Z1's OEM timing chain kit with all the add on's JWT C2 exhaust cam kit I sourced the full OEM gasket kit from Husam gbrettin and wideglideleon like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

12-13-2018, 07:06 AM	#65 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Finished up the fuel pump assembly last night. Relocating the car so we can start pulling the motor out, only to put it back in to finish all the fab work. axmea? and redondoaveb like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

12-13-2018, 11:19 AM	#66 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	That is one sexy looking fuel pump assembly. redondoaveb and sirnixalot like this.

12-14-2018, 04:53 PM	#67 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Got the cylinder heads from Elmo370z They are on their way to AAM for them to bolt onto the short block. Can't wait to get this thing back on the road Zingston likes this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap Last edited by sirnixalot; 12-22-2018 at 09:47 AM.

12-22-2018, 03:49 PM	#68 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Figured I'd go overboard while waiting for everything to arrive. Tig welded a -4AN male fitting onto the actuators. 35 amps and someone pouring water on the actuator can the whole time. Pressure tested and all is well. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

12-27-2018, 07:09 AM	#69 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Got some work done on boxing day. The front end is off and the harness is disconnected from the engine. I'm making an engine hoist adapter later so this weekend I can pull the motor out and get it on the stand. Plan is to bolt up the turbo's and do what plumbing mock ups i need to on the stand, then put the broken motor back in and the front end back on to sort the intercooler piping and at least get the down pipes done. Sexy CJ-Motorsport rails and the Bosch EV14's Got the fuel regulator mounted up as well axmea? likes this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

12-28-2018, 02:25 PM	#70 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	most overkill engine hoist bracket award goes to! We pulled a vq25 out of a skyline with a much lighter duty bracket using only the 2 intake manifold studs. Thinking i might add some side pieces to use 4 more bolts though. gbrettin and Zingston like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

12-28-2018, 03:14 PM	#71 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Saw concept Z was having 10% off aftermarket soooooooooo JWT C2 exhaust cam kit ordered and shipping to AAM __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

12-30-2018, 05:34 PM	#72 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Got the engine out today and started the mock up for the plumbing. I ordered the oil lines way too short so I'll have to get the correct length. The block coolant drain plugs are bspt. I'll be welding some 6an bungs to those tomorrow and drilling a hole through them to supply the turbos with coolant. It's a snug fit in here to say the least, I'll be cutting a quarter inch off the intake adapter so I can start the bend farther back, welding is the only option i see here __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

12-31-2018, 11:00 AM	#73 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Welded up the coolant fittings, I still need to hit them with a wire wheel to take off the burnt zinc coating __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

12-31-2018, 11:09 PM	#74 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Fittings cleaned up Used a counter sink bit to taper the inlet Proof of concept. I will be using a 6AN Tee with a female on the adapter side so a 90* can go to the passenger turbo and a 45* or 60* can go down to the drivers side. A shot of the water feed and oil drain. The turbo feed line I ordered was about 8" too short. I'm ordering a 36" line since this is a 27". The upper coolant port uses a 180* fitting to point under the manifold and up the back of the block. Passenger side, what a tight fit. I had to cut off a piece of the compressor housing casting to clear the 90* fitting. A 120* might work better. Here's a shot from underneath showing that line Actuator mounting mod after clocking the compressor housing clockwise Tomorrow I MIGHT see about pushing the motor back in the bay. If I can do that then its hot side and intake piping time gbrettin and ZontheRocks like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

01-01-2019, 07:12 PM	#75 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57453	Got the broken engine with the turbos on back in along with the radiator support, intercooler and cold side piping. This bracket that the wiring harness clips to will need trimming to run the intake for the passenger side I need to adjust the compressor housing clockwise a small amount but the hot side piping is pretty simple. There is no way in hell i can fit an intake to run the way i want to run it without converting to the newer low side ac line. I also need a lower profile fitting than that big *** -12AN off the coolant adapter plate. I have a 1/2" NPT to 3/4" hose barb in the summit cart I'm gonna have to bend the newer low side ac line up a bit and fire sleeve it as well. I'm having a well deserved day off tomorrow with my son, thursday I'll be tack welding the hot side piping together and confirming fitment. I also need to get my VVEL ladders off to AAM next week as well so they can bolt everything down with the C2's ZontheRocks likes this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap Last edited by sirnixalot; 01-02-2019 at 07:13 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z For Sale 2010 Black 7AT with Sport	ViCiouS	370Z For Sale	6	07-25-2016 06:55 PM
2010 370 Z Sport Package	sweetazzz16	Cars for sale (Private Classifieds)	1	05-02-2016 05:06 PM
370Z For Sale 2010 Roadster Red W/ Sport Pkg. and Nav	hansoac	370Z For Sale	4	10-17-2011 03:01 PM
FS - my 2010 base + sport PW 6sp	butdamnbrian	Northern California Region	6	10-13-2011 02:37 PM
SA TX 2010 BS 6mt w/sport package	lllll210lllll	370Z For Sale	1	11-02-2010 11:38 PM