Nissan 370Z Forum  

My 13' 370z build thread

April 2017: BP Single Turbo on it's way. Update Posted This last month I picked up a 2013 370z sport with 25k miles, a nice upgrade from my g35 and

Go Back   Nissan 370Z Forum > Nissan 370Z General Area > Member's 370Z Gallery


Like Tree4Likes
  • 2 Post By zashburn
  • 1 Post By Sway
  • 1 Post By TerribleONE

Reply
 
LinkBack Thread Tools Display Modes
Old 12-30-2016, 05:15 PM   #1 (permalink)
Base Member
 
Join Date: Nov 2016
Location: Baltimore MD
Posts: 45
Drives: 13' 370Z Pearl 6MT
Rep Power: 8
zashburn is on a distinguished road
Default My 13' 370z build thread

April 2017: BP Single Turbo on it's way. Update Posted

This last month I picked up a 2013 370z sport with 25k miles, a nice upgrade from my g35 and my first manual transmission! After a few days learning to drive stick I ordered my first mod (the Stillen G3 CAI) and since I've been addicted to sprucing up the car. I'd love to hear your opinions / suggestions! Here's what I have done so far

Updated 02/05/16: 315.5HP - 273.6TQ

Engine/exhaust:
~ Stillen G3 longtube CAI
~ Motordyne m370 manifold
~ Fast Intentions RHFC
~ ARK grip exhaust
~ EcuTek tune
Wheels/suspension:
~ Swift Spec-R springs
~ Eibach Sways
~ 20in silver Volk GT30
Aesthetics/Extras:
~ 3M Satin Pearl White vinyl wrap
~ 3M Gloss Black vinyl roof, spoiler, diffuser
~ 20% Window tint
~ Kenwood Head unit
~ Zenclosure box with kicker sub





Click here to check out my full album
I'd like to give a shout out to Absolute Perfection Applied Graphics - in Sykesville, MD for an absolutely fantastic wrap job & Hills Garage - in Elkridge, MD. They are a family run shop with some of the most knowledgeable Nissan mechanics I've ever met. These guys are seriously the best and I highly recommend checking them out if you're in the area.

Also thank you to the entire the370z.com community for all the awesome help/resources available to us newbies! Looking forward to becoming a part of it.
370zHawaii and ChaseZ like this.

Last edited by zashburn; 04-28-2017 at 10:00 AM. Reason: new parts
zashburn is offline   Reply With Quote
Old 01-01-2017, 12:27 AM   #2 (permalink)
Base Member
 
Join Date: Sep 2016
Location: Kentarolina
Posts: 67
Drives: 370z
Rep Power: 8
PJ23 is on a distinguished road
Default

Wheel and tire setup seems a bit skinny, but I love the look of the car otherwise! The wrap looks amazing as well.

I know I've researched the M370 until my eyes bled, so I'd like to hear your thoughts. We're going to running the same setup pretty much(I, too, am waiting for shipment from FI,) and I'd be interested in getting your thoughts on the mod once you have everything tuned.

Good job though. Keep it up!
PJ23 is offline   Reply With Quote
Old 01-10-2017, 06:19 PM   #3 (permalink)
Base Member
 
Join Date: Nov 2016
Location: Baltimore MD
Posts: 45
Drives: 13' 370Z Pearl 6MT
Rep Power: 8
zashburn is on a distinguished road
Default

Quote:
Originally Posted by PJ23 View Post
Wheel and tire setup seems a bit skinny, but I love the look of the car otherwise! The wrap looks amazing as well.

I know I've researched the M370 until my eyes bled, so I'd like to hear your thoughts. We're going to running the same setup pretty much(I, too, am waiting for shipment from FI,) and I'd be interested in getting your thoughts on the mod once you have everything tuned.

Good job though. Keep it up!
Unfortunately the previous owner of the wheels had them on his slammed Lexus and it required a lot of tire stretch to fit. I will be purchasing some new properly fitting tires soon. Thank you and I appreciate the feedback!

I also researched the m370 for hours&hours. The only reason I jumped the gun was I found a used manifold for a little over $400 which was much easier to justify then paying full price. I will say I have noticed an increase in torque. The car has an easier time losing traction in the 3-5k rpm range than pre-install (small but substantial enough that I strongly believe it is actually present and that I'm not just living off the placebo). I also defiantly noticed an increase in throatiness of the engine sound which I find very pleasing!

Should have her on the dyno sometime in the next few weeks and I will be sure to post the results / let you know how the numbers look
__________________
13' 370Z Sport 6MT - BP Turbo
zashburn is offline   Reply With Quote
Old 01-11-2017, 08:31 AM   #4 (permalink)
Enthusiast Member
 
370zHawaii's Avatar
 
Join Date: Oct 2010
Location: Sun Shining State
Posts: 294
Drives: A Starship
Rep Power: 14
370zHawaii is on a distinguished road
Default

Awesome mods and great color choice. I cant tell if you went with V1 or V2 on the ARK Grip from your pics, either way car looks great. How does your exhaust setup sound so far? I had the ARK Grip V2 only with no other mods and it sounded great and got much louder over time. Would love to hear a sound clip after you get the HFCs burned in!
370zHawaii is offline   Reply With Quote
Old 01-11-2017, 03:23 PM   #5 (permalink)
Base Member
 
Join Date: Nov 2016
Location: Baltimore MD
Posts: 45
Drives: 13' 370Z Pearl 6MT
Rep Power: 8
zashburn is on a distinguished road
Default

Quote:
Originally Posted by 370zHawaii View Post
Awesome mods and great color choice. I cant tell if you went with V1 or V2 on the ARK Grip from your pics, either way car looks great. How does your exhaust setup sound so far? I had the ARK Grip V2 only with no other mods and it sounded great and got much louder over time. Would love to hear a sound clip after you get the HFCs burned in!
Thanks! I'll include a rear pic showing the exhaust. Bought it recently directly from ARK's website so I'm assuming it's a V2. I've heard the V1 had fitment issues and I have it + swift springs with no scraping or issues whatsoever.

I also love the sound and mine seems to be getting slowly loader as it breaks in. Really looking forward to see how it sounds with the FI resonated HFC. I'm hoping it will be significantly louder WOT but that the resonators will keep the drone down (reason I bought the ARK was for good sound quality with minimal drone). I'll try to get a nice quality audio file posted once installed

__________________
13' 370Z Sport 6MT - BP Turbo

Last edited by zashburn; 02-05-2017 at 07:44 PM.
zashburn is offline   Reply With Quote
Old 02-05-2017, 07:39 PM   #6 (permalink)
Base Member
 
Join Date: Nov 2016
Location: Baltimore MD
Posts: 45
Drives: 13' 370Z Pearl 6MT
Rep Power: 8
zashburn is on a distinguished road
Default FI RHFC, Ecutek, & Dyno numbers

Finally got the car finished & on a dyno. DynoDynamics dyno numbers are: 281.7HP - 249TQ. Scaled to a DynoJet (shown in the second photo) this comes out to be: 315.5HP - 273.6TQ


According to my tuner the dyno dynamics dyno reads differently than the typical dyno's people use. The next picture is Dynojet scaled horsepower along with my pre&post A/F ratio:


The throttle response and traction control maps we worked out make the car feel amazing. As you may see the A/F ratio on the stock fuel map with my mods was terrible so I'm extremely glad I got that corrected. Although the numbers weren't as high as I expected, I most defiantly felt the increase in torque & power

Future plans: I plan to start participating in local AutoX events along with getting the car to the drag strip. I will take this time to decide what the future holds. Two 370's @ the shop I frequent have Boosted performance mid mount single turbos going in on stock internals. Assuming all goes well for them & I don't fall in love with autoX I am highly considering going with the B.P. single turbo as well
__________________
13' 370Z Sport 6MT - BP Turbo

Last edited by zashburn; 02-05-2017 at 09:16 PM.
zashburn is offline   Reply With Quote
Old 02-05-2017, 08:52 PM   #7 (permalink)
Track Member
 
Sway's Avatar
 
Join Date: Sep 2012
Location: TX
Posts: 697
Drives: 2018 GTR
Rep Power: 37870
Sway has a reputation beyond reputeSway has a reputation beyond reputeSway has a reputation beyond reputeSway has a reputation beyond reputeSway has a reputation beyond reputeSway has a reputation beyond reputeSway has a reputation beyond reputeSway has a reputation beyond reputeSway has a reputation beyond reputeSway has a reputation beyond reputeSway has a reputation beyond repute
Default

That satin wrap looks amazing. Nice choice!
zashburn likes this.
__________________
- White 2018 GTR FBO+E85 -
Check out my old build thread: Sway’s Journal-Hitomi
~Live and let live!~
Sway is offline   Reply With Quote
Old 04-28-2017, 09:57 AM   #8 (permalink)
Base Member
 
Join Date: Nov 2016
Location: Baltimore MD
Posts: 45
Drives: 13' 370Z Pearl 6MT
Rep Power: 8
zashburn is on a distinguished road
Default Single turbo coming soon

After lots of thought I've finally decided the Z will be getting boosted
She will continue to be my daily driver so I've got my fingers crossed everything goes smoothly.

If any of you OG's or even just anyone who has experience boosting the Z comes across this thread please share your thoughts or experiences, again any advice is appreciated. Expecting a bit of an adventure here but the more I know going in the better. So, onto my parts list.

BP Single Turbo kit - COMP 800HP twin-scroll, TBB, etc.
Innovate SGC-1 Boost Controller Gauge
GaleForce Premium Single Gauge A-Pillar
CSF triple pass Radiator
Z1 34 row Oil Cooler
South Bend Stage 2 Daily Clutch w/Quiet Disk
RJM Adjustable Pedal
South Bend 19lb LWF
ZSpeed CMAK CSC Delete *** Making an attempt to install the kit around this, with the stage 2 clutch in (hoping it will hold up as I am not rough on the clutch). I have a SB Stage 4 clutch & HD CSC in the garage ready to go in if we can't fabricate are way around the CMAK. ***
Ecutek Software
PTP Lava Turbo bag
Daily Tires: Michelin PS4S
Powder Coat going on IC piping
Either a ceramic coat or heat wrap for the hot side

As far as the tune I am on Ecutek already & will just need to hop on the dyno for a retune. Here is what I'm thinking as far as my maps are concerned;
At least until I work up some funds for an engine build I'm thinking of starting with something like a 6psi waste gate spring in. While I want to believe that I will control myself, I'm not so sure I can. If I am correct having the 6psi spring paired with the EBC should give me up to 12pounds of boost which should be PLENTY for now.
Again she's the daily driver so looking for conservative tune as far as timing, etc. Depending on what type of numbers we are seeing on the dyno may decide to go a little less conservative.
TUNE 1: SMOKEY TIRE MODE
Med or High boost – NO Traction Control (TC)
TUNE 2: TRAVEL / DAILY
Low boost (~6psi) – Ecutek TC
[TUNE W/NO BOOST CONTROLER??? This will allow me to have a safe map to use if the BC shoots the ****? Talk to Frank.]
TUNE 3: DAILY
Med boost (~8psi) – Ecutek TC
TUNE 4: RACE
High boost (~10-12psi) – Ecutek TC

Will continue with updates! Goodies are showing up daily


__________________
13' 370Z Sport 6MT - BP Turbo
zashburn is offline   Reply With Quote
Old 04-28-2017, 10:00 AM   #9 (permalink)
A True Z Fanatic
 
TerribleONE's Avatar
 
Join Date: Jan 2009
Location: Socal
Posts: 10,203
Drives: WOT
Rep Power: 5850
TerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond reputeTerribleONE has a reputation beyond repute
Default

Subd!
zashburn likes this.
__________________
638WHP 541WTQ @ 13.5PSI
Build thread
TerribleONE is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Nick's 370z Roadster Build Thread NickD Member's 370Z Gallery 50 09-09-2016 03:06 PM
Riptide's S30 280Z and Z34 Nismo 370Z build thread Riptide67 Member's 370Z Gallery 21 10-18-2015 02:55 AM
Farewell to my 370Z - my build thread NotMyBday Member's 370Z Gallery 10 12-28-2014 08:41 PM
209z 370z Team Blur Build Thread 209Z Member's 370Z Gallery 294 10-01-2013 02:15 PM
Password:JDM 2011 370Z Nismo #170 Build Thread PasswordJDM Member's 370Z Gallery 31 11-24-2011 05:32 PM


All times are GMT -5. The time now is 06:35 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2