schrute's journal

pgrmstr · 03-01-2010, 05:57 PM

i just installed mine on Sunday, piece of cake, although I baked mine onto some ramps and while it was a tight squeeze towards the front, I was able to get everything in without an issue. I have to adjust the height of one with some washers.

As far as the heat shield goes, you don't have to cut anything. It's real flimsy tin so all you need to do is bend the corner about 45% away and its fine.

sound is intoxicating for sure!! haven't done any highway testing yet for drone though...but as you say, the car's interior is on the loud side to begin with...

schrute · 03-01-2010, 10:32 PM

^Good info about the heat shield and good suggestion about the ramps.

Sounds great, doesn't it?

schrute · 03-03-2010, 12:00 AM

Spent today installing some stuff. Was on the fence about installing the eibach springs but decided to go ahead and try them out. Along with the springs I installed rear camber arms purchased from thmotorsports, a sponser here. I decided to use a lift for this install so I got a chance to try out a local DIY shop here in town - pretty cool concept and a nice setup for DIYers without their own lift.

My buddy Tyler helped out today - thanks man!

Big difference between the OEM springs and the eibachs (these are the fronts)

Even with the lowering springs I'm happy to report that my F.I. exhaust doesn't scrape on my driveway as long as I take it an angle. Those used to lowered cars know to take dips at an angle but the first time I pulled out of my garage I just wasn't thinking about it. I've been carfeful since then and haven't scraped again.

I also installed Hotchkis sway bars, a big thanks to ChrisSlicks for his front & rear sway bars DIY threads - helped a bunch! +1 Rep

I'm going to get an alignment tomorrow - my car handles like crap right now with the alignment all thrown off. Any suggestions for alignment settings with this setup?

RCZ · 03-03-2010, 08:19 AM

-1.5F, -1.3R with the hotchkis bar set to medium in the rear.

370zdub · 03-03-2010, 11:03 AM

Where is that shop at shrute?

schrute · 03-03-2010, 12:18 PM

Quote:

Originally Posted by RCZ

-1.5F, -1.3R with the hotchkis bar set to medium in the rear.

Thanks RCZ!

Quote:

Originally Posted by 370zdub

Where is that shop at shrute?

Corner of 1300 South and 700 West in Salt Lake.

370zdub · 03-03-2010, 01:40 PM

thanks man. Thats pretty cool I have never heard of a shop like that.

dlmartin81 · 03-03-2010, 07:21 PM

I must say, that DIY shop is pretty neat. I like that. What's the cost?

tbonesteak · 03-03-2010, 08:31 PM

It's on the website he linked.

kevin.z · 03-03-2010, 08:36 PM

Quote:

Originally Posted by RCZ

-1.5F, -1.3R with the hotchkis bar set to medium in the rear.

what is the recommended front hotchkis bar set to?
thanks

schrute · 03-03-2010, 10:25 PM

Quote:

Originally Posted by 370zdub

thanks man. Thats pretty cool I have never heard of a shop like that.

Their problem is not enough people have heard about them - you can see in the pix the shop is a little empty. It's a great concept and I really hope they make it. In this economy you would think people are hanging on to their cars longer and doing more maintenance, I just don't think enough people know about the place. They've been doing more advertising lately so hopefully things pick up, easy access to a lift for $15/hr. sure is convenient.

Quote:

Originally Posted by dlmartin81

I must say, that DIY shop is pretty neat. I like that. What's the cost?

$15/hr. for the lift, $10/hr. more for unlimited access to their tools (basic tools included for free). $119 for the day which is what I did since I was doing a few things at once it took a few hours and I didn't have enough room in the Z to bring everything I needed (creeper, floor jack, air tools, etc. - all included).

Quote:

Originally Posted by tbonesteak

It's on the website he linked.

Quote:

Originally Posted by kevin.z

what is the recommended front hotchkis bar set to?
thanks

Hotchkis front sway is non-adjustable.

schrute · 03-06-2010, 01:35 AM

Stopped at Jimmy Johns for lunch today, another Z had the same idea...

How many silver cars can you find in the pic?

fairladyZ34 · 03-06-2010, 01:30 PM

^ looking good my dude! i really like your color combination and the tail lights.

schrute · 03-07-2010, 01:29 AM

Quote:

Originally Posted by fairladyZ34

^ looking good my dude! i really like your color combination and the tail lights.

Thanks fairlady!

I switched to my new summer wheels today, SSR Type F 18's in matte black. It's supposed to rain/snow tomorrow, if it doesn't I'll get some pics. I'm really happy with these wheels along with the drop.

schrute · 03-07-2010, 04:48 AM

Along with the wheel swap today I cleaned up some previous work (greased the sway bar mounts, re-torqued the front and rear suspension bolts - some bushings were squeaking most likely from overtightening). My wife and I had the day off together and she got a little camera happy so I thought I would share.

Halfway through the wheel swap. Which ones do you think look better?

When the wife does well at work she is sometimes rewarded with the company seats at the Jazz game. 12th row. I am constantly encouraging my wife to do well at work

Jazz win

Another Saturday of working on the Z and basketball...

03-01-2010, 10:32 PM	#152 (permalink)
schrute Track Member Join Date: Aug 2009 Location: utah Posts: 781 Drives: my z every day Rep Power: 16	^Good info about the heat shield and good suggestion about the ramps. Sounds great, doesn't it? __________________ my journal \| 2009 370z touring \| 6mt \| platinum graphite \| my album second skin \| mr works \| fast intentions \| ssr \| eibach \| hotchkis \| spc \| toyo \| bluebatmobile \| v-led \| jwt \| ventureshield \| tinted tails

03-03-2010, 12:00 AM	#153 (permalink)
schrute Track Member Join Date: Aug 2009 Location: utah Posts: 781 Drives: my z every day Rep Power: 16	Spent today installing some stuff. Was on the fence about installing the eibach springs but decided to go ahead and try them out. Along with the springs I installed rear camber arms purchased from thmotorsports, a sponser here. I decided to use a lift for this install so I got a chance to try out a local DIY shop here in town - pretty cool concept and a nice setup for DIYers without their own lift. My buddy Tyler helped out today - thanks man! Big difference between the OEM springs and the eibachs (these are the fronts) Even with the lowering springs I'm happy to report that my F.I. exhaust doesn't scrape on my driveway as long as I take it an angle. Those used to lowered cars know to take dips at an angle but the first time I pulled out of my garage I just wasn't thinking about it. I've been carfeful since then and haven't scraped again. I also installed Hotchkis sway bars, a big thanks to ChrisSlicks for his front & rear sway bars DIY threads - helped a bunch! +1 Rep I'm going to get an alignment tomorrow - my car handles like crap right now with the alignment all thrown off. Any suggestions for alignment settings with this setup? __________________ my journal \| 2009 370z touring \| 6mt \| platinum graphite \| my album second skin \| mr works \| fast intentions \| ssr \| eibach \| hotchkis \| spc \| toyo \| bluebatmobile \| v-led \| jwt \| ventureshield \| tinted tails Last edited by schrute; 03-03-2010 at 12:03 AM.

03-03-2010, 11:03 AM	#155 (permalink)
370zdub Track Member Join Date: Jun 2009 Location: UT Posts: 628 Drives: 09 370z 6mt,10 Ford Rep Power: 16	Where is that shop at shrute? __________________ 2010 Ford 6.4L Power Stroke Diesel: 588whp/1082wtrq 2007 Dodge 6.7L Cummins Diesel: 788whp/1405wtrq, runs 12's @ 7400lbs, Still miss my 370z!

03-03-2010, 01:40 PM	#157 (permalink)
370zdub Track Member Join Date: Jun 2009 Location: UT Posts: 628 Drives: 09 370z 6mt,10 Ford Rep Power: 16	thanks man. Thats pretty cool I have never heard of a shop like that. __________________ 2010 Ford 6.4L Power Stroke Diesel: 588whp/1082wtrq 2007 Dodge 6.7L Cummins Diesel: 788whp/1405wtrq, runs 12's @ 7400lbs, Still miss my 370z!

03-06-2010, 01:35 AM	#162 (permalink)
schrute Track Member Join Date: Aug 2009 Location: utah Posts: 781 Drives: my z every day Rep Power: 16	Stopped at Jimmy Johns for lunch today, another Z had the same idea... How many silver cars can you find in the pic? __________________ my journal \| 2009 370z touring \| 6mt \| platinum graphite \| my album second skin \| mr works \| fast intentions \| ssr \| eibach \| hotchkis \| spc \| toyo \| bluebatmobile \| v-led \| jwt \| ventureshield \| tinted tails

03-01-2010, 05:57 PM	#151 (permalink)
pgrmstr Base Member Join Date: Mar 2009 Location: PA Posts: 131 Drives: 09 BS 370z Sport 6MT Rep Power: 16	i just installed mine on Sunday, piece of cake, although I baked mine onto some ramps and while it was a tight squeeze towards the front, I was able to get everything in without an issue. I have to adjust the height of one with some washers. As far as the heat shield goes, you don't have to cut anything. It's real flimsy tin so all you need to do is bend the corner about 45% away and its fine. sound is intoxicating for sure!! haven't done any highway testing yet for drone though...but as you say, the car's interior is on the loud side to begin with...

03-03-2010, 08:19 AM	#154 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	-1.5F, -1.3R with the hotchkis bar set to medium in the rear.

03-03-2010, 07:21 PM	#158 (permalink)
dlmartin81 Track Member Join Date: Dec 2008 Location: Chalfont, PA Age: 42 Posts: 923 Drives: 09 370Z Rep Power: 607	I must say, that DIY shop is pretty neat. I like that. What's the cost?

03-03-2010, 08:31 PM	#159 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 375	It's on the website he linked.

03-06-2010, 01:30 PM	#163 (permalink)
fairladyZ34 A True Z Fanatic Join Date: Aug 2009 Location: Central NJ Posts: 1,577 Drives: 08 G37S Black M6 Rep Power: 18	^ looking good my dude! i really like your color combination and the tail lights. __________________ From Z to G to BMW and back to a G! Nismo for life

03-07-2010, 04:48 AM	#165 (permalink)
schrute Track Member Join Date: Aug 2009 Location: utah Posts: 781 Drives: my z every day Rep Power: 16	Along with the wheel swap today I cleaned up some previous work (greased the sway bar mounts, re-torqued the front and rear suspension bolts - some bushings were squeaking most likely from overtightening). My wife and I had the day off together and she got a little camera happy so I thought I would share. Halfway through the wheel swap. Which ones do you think look better? When the wife does well at work she is sometimes rewarded with the company seats at the Jazz game. 12th row. I am constantly encouraging my wife to do well at work Jazz win Another Saturday of working on the Z and basketball... __________________ my journal \| 2009 370z touring \| 6mt \| platinum graphite \| my album second skin \| mr works \| fast intentions \| ssr \| eibach \| hotchkis \| spc \| toyo \| bluebatmobile \| v-led \| jwt \| ventureshield \| tinted tails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mike's Journal	Mike	Member's 370Z Gallery	638	08-11-2023 10:06 AM
SIMOTA1's journal....	simota1	Member's 370Z Gallery	3415	02-24-2015 07:33 AM
NewYorkJon's Journal	NewYorkJon34	Member's 370Z Gallery	236	12-28-2012 12:13 AM
KillerBee370's journal	KillerBee370	Engine & Drivetrain	100	08-18-2010 01:58 PM
Imag Z journal	imag	Member's 370Z Gallery	4	05-06-2009 02:05 PM