Anyone here into firearms?

ZeeingAround · 05-15-2018, 10:09 PM

Bought two new ones today at an auction.
Savage Arms 311A Side x Side 12 Ga Shotgun (going to my son for the skeet range)
Norinco SKS paratrooper model. I still need to get an original magazine for it.
I call it "cheap heat".
Looks like I need another safe now.

Rusty · 05-15-2018, 10:29 PM

Thinking on getting one of these in 6.5 Creedmore.

https://www.remington.com/rifles/bol.../model-700-pcr

VABAM · 05-16-2018, 11:48 AM

Quote:

Originally Posted by Rusty

Thinking on getting one of these in 6.5 Creedmore.

https://www.remington.com/rifles/bol.../model-700-pcr

Forget that, get a standard 700 (or something else

) and drop it in a MDT (Modular Driven Technologies) chassis. I plan on putting my Savage 10 FCP-SR in one of their ESS chassis. The ESS is their top tier chassis and has many options making it the most expensive but they have other chassis systems that are cheaper. In the grand scheme of things MDT's chassis are very well priced. Some might say that they are cheap, especially considering most after market chassis systems are $1500+. Another thing about MDT chassis systems is they fit a wide variety of rifle models so you are not limited to 700s like many other systems. Speaking model compatibility, their Savage variants are compatible with both types of Savage bolt releases, top and bottom, in the same chassis. Check out MDT you might be pleasantly surprised. mdttac.com

MDT ESS

( Click to show/hide )

MDT LSS-XL Gen 2

( Click to show/hide )

MDT LSS

( Click to show/hide )

MDT LSS-22 (22lr)

( Click to show/hide )

ZeeingAround · 05-17-2018, 08:20 AM

Savage double barrel:Need a firing pin replacement and a little adjustment to the selector. My kid had it stripped within a 1/2hr of getting it home. I had to make a screwdriver long enough to get the stock off.
The SKS stock is beat but the mechanics and barrel are clean. He stripped that down and cleaned out the old factory grease. Piston was nearly perfect. all numbers match.

Ghostvette · 05-17-2018, 09:55 AM

Quote:

Originally Posted by ZeeingAround

Savage double barrel:Need a firing pin replacement and a little adjustment to the selector. My kid had it stripped within a 1/2hr of getting it home. I had to make a screwdriver long enough to get the stock off.
The SKS stock is beat but the mechanics and barrel are clean. He stripped that down and cleaned out the old factory grease. Piston was nearly perfect. all numbers match.

I think I got mags for my SKS from Midway, they are polymer. I read somewhere that imported SKS rifles have to have 6-8 (?) US made parts to make them legal. The mag counts as 3... I think...

ZeeingAround · 05-17-2018, 10:14 AM

I am going to look around for some metal ones at the gun show too. I don't need any hi capacity ones. we will make sure it shoots well, fix a crack in the wood , get all the surface rust gone. Not sure if we will reblue it yet or not. It is there to give the kid experience and then we will flip it.

Ghostvette · 05-17-2018, 10:32 AM

I got a deal on mine, it's a Chinese (I think) one with a Dragonov polymer stock and scope. I got the original wooden stock with it, but had to buy my own mags. Only reason I got it was because I didn't have anything chambered in 7.62 x 39....

ZeeingAround · 05-17-2018, 08:54 PM

We have a Chinese norinco. chrome lined barrel is nice.
There is another police auction coming up with more and the pictures show the savages cut off/down the wooden stocks.
Let me know if you want to sell the wooden stock you have.
We are looking for the bayonet too.

ZeeingAround · 05-17-2018, 09:00 PM

VABAM · 05-18-2018, 10:28 AM

Quote:

Originally Posted by ZeeingAround

Can't see the pic.

ZeeingAround · 05-18-2018, 03:55 PM

do you see it now? I changed albums.

VABAM · 05-18-2018, 05:03 PM

Quote:

Originally Posted by ZeeingAround

do you see it now? I changed albums.

Yep

bunk · 07-31-2018, 08:54 AM

My baby! Born in May 1942

Rusty · 07-31-2018, 11:01 AM

Quote:

Originally Posted by bunk

My baby! Born in May 1942

Nice.

Wonder what action it seen in WWII? And the history behind it?

ZeeingAround · 07-31-2018, 02:12 PM

Yea, that is an old one. Nice shape on the stock. I am doubting it seen action.

05-15-2018, 10:09 PM	#1 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86625	Bought two new ones today at an auction. Savage Arms 311A Side x Side 12 Ga Shotgun (going to my son for the skeet range) Norinco SKS paratrooper model. I still need to get an original magazine for it. I call it "cheap heat". Looks like I need another safe now. __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time.

05-15-2018, 10:29 PM	#2 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,571 Drives: 2011 Nismo GM 6M Rep Power: 2684440	Thinking on getting one of these in 6.5 Creedmore. https://www.remington.com/rifles/bol.../model-700-pcr __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

05-17-2018, 08:20 AM	#4 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86625	Savage double barrel:Need a firing pin replacement and a little adjustment to the selector. My kid had it stripped within a 1/2hr of getting it home. I had to make a screwdriver long enough to get the stock off. The SKS stock is beat but the mechanics and barrel are clean. He stripped that down and cleaned out the old factory grease. Piston was nearly perfect. all numbers match. __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time. Last edited by ZeeingAround; 05-17-2018 at 08:51 AM.

05-17-2018, 10:14 AM	#6 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86625	I am going to look around for some metal ones at the gun show too. I don't need any hi capacity ones. we will make sure it shoots well, fix a crack in the wood , get all the surface rust gone. Not sure if we will reblue it yet or not. It is there to give the kid experience and then we will flip it. __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time.

05-17-2018, 10:32 AM	#7 (permalink)
Ghostvette A True Z Fanatic Join Date: Aug 2013 Location: Shawnee KS Posts: 5,698 Drives: 15 Magma Red 6MT Rep Power: 2684378	I got a deal on mine, it's a Chinese (I think) one with a Dragonov polymer stock and scope. I got the original wooden stock with it, but had to buy my own mags. Only reason I got it was because I didn't have anything chambered in 7.62 x 39.... __________________ 2015 Magma Red 6MT Sport Tech/2012 Fairlady MB 6MT Base (RIP 08032018)https://www.nicoclub.com/FSM/370Z/Coupe/

05-17-2018, 08:54 PM	#8 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86625	We have a Chinese norinco. chrome lined barrel is nice. There is another police auction coming up with more and the pictures show the savages cut off/down the wooden stocks. Let me know if you want to sell the wooden stock you have. We are looking for the bayonet too. __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time.

05-17-2018, 09:00 PM	#9 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86625	__________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time. Last edited by ZeeingAround; 05-18-2018 at 03:34 PM.

05-18-2018, 03:55 PM	#11 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86625	do you see it now? I changed albums. __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time.

07-31-2018, 02:12 PM	#15 (permalink)
ZeeingAround A True Z Fanatic Join Date: Dec 2010 Location: Michigan Posts: 6,365 Drives: 3500 NVP 370Z-sold! Rep Power: 86625	Yea, that is an old one. Nice shape on the stock. I am doubting it seen action. __________________ Get some roosters for eggs and Bulls for milk . Then you will see that gender matters. Especially at milking time.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode