Anyone here into firearms?

synolimit · 03-12-2015, 01:04 PM

Quote:

Originally Posted by Rusty

My AR has a 16" SS bull barrel. I normally clover leaf my groups at 100m's. At 500m's, on a good day. I can shoot 2" groups. My buddy can shoot my AR out to 700m's no problem.

I use either the Sierra 69gr Match or the Hornady 68gr Match bullets, with Norma brass, CCI 400 primers. I want to try the Berger 70gr VLD bullets next.

But what are you looking for with your reloads? Just accuracy or speed also as you test so you know it's not only on point but can also knock something down.

synolimit · 03-12-2015, 01:06 PM

Quote:

Originally Posted by Inspector71

A number of years ago, I had Accuracy Rifle Systems build a mini-14 for me. The only part of the rifle that is Ruger is the receiver. It has a 1" lothar Walther barrel, about 20" long, Hogue stock, new gas block, you name it. With a cheap scope, it shot .5 at 100 yards bench rested. I went through all the protocols, 1 shot, clean it, for 20 rounds. Took forever. Then 3 shots clean it for 20 rounds. And then I put it away. Most accurate rifle I've ever fired but what the heck do I need with a $1300 dollar .223 rifle in mini-14? The owner has passed away and I bet they went out of business. Cool guy too. Talked to him before he died. Anyone know in this current climate is it worth trying to sell or just keep?

I'd only sell a gun if I needed money asap. Or maybe upgrade.

Rusty · 03-12-2015, 10:01 PM

Quote:

Originally Posted by Scott@Synergy

But what are you looking for with your reloads? Just accuracy or speed also as you test so you know it's not only on point but can also knock something down.

Speed and accuracy kind of go hand in hand up to a point. Then you start to over-drive the bullet. Work you reloads up in .5gr increases. Load 10 up at what you think is the lowest amount of powder. Then load 10 more at .5 gr increase and so on up to the max load. Start shooting each load and take notes on the group size. You should notice the groups getting smaller. Once the groups start to open up. you know you have found the load for the rifle, brass, powder, bullet and primer. Change any one of those, and you will have to start over. Also keep an eye out for over-pressure. It helps if you have a chrono to measure your bullet velocity. Once you know your velocity. You can look up in your ballistic tables to see at what yardage the bullet goes sub-sonic. At that point, most bullets become unstable. A .22 cal with a BC of .305, and a velocity of 2,900 should be stable out to 700~800 yards. Another thing too. Is barrel break-in. You got to shoot about 200+ rounds through it before getting down to brass-tacks. If you can't put it on target, forget killin' it.

You punching paper, or killin' something?

If you want to knock something down on a regular basic. Get something bigger. A AR chambered for a .243 with a Hornady 105gr A-Max. Has a BC of .500. which is better then any .22 cal bullet.

HKYStormFront · 03-18-2015, 06:53 AM

zensation brought over his AR Sunday to get a few pictures taken of it. Really digging the blue receiver, looks pretty cool.

exsanity · 03-18-2015, 08:53 AM

Quote:

Originally Posted by HKYStormFront

zensation brought over his AR Sunday to get a few pictures taken of it. Really digging the blue receiver, looks pretty cool.

( Click to show/hide )

Beautiful piece! I'm a fan of the A-frame front sight, but it is what it is.

Rusty · 03-24-2015, 07:16 PM

If anyone here is in to ballistic tables. Here is a good website.

JBM - Calculations

Trips · 03-24-2015, 10:39 PM

I removed posts that were clearly in violation of forum rules.

I would like to again remind everyone that any types of solicitation sales are not allowed and are to be conducted off the forum.

This is only for discussions.

Thank You.

tvfreakazoid · 03-24-2015, 10:44 PM

My bad

2 by 2...hands of blue

HKYStormFront · 03-25-2015, 07:01 AM

Quote:

Originally Posted by Trips

I removed posts that were clearly in violation of forum rules.

I would like to again remind everyone that any types of solicitation sales are not allowed and are to be conducted off the forum.

This is only for discussions.

Thank You.

Keep 'em straight, trips!

synolimit · 03-30-2015, 05:35 PM

All done! First build complete... Got a proper mag, it's sighted in with some old reloads and shooting sub MOA. It was 6" low and 5" right and the scope worked perfect with 1/4" clicks. I hit bullseye first shot after 1 adjustment. Only complaint is it's got a good amount of recoil and take down is still tight! I youtubed best breaks and a guy did a sled test on 30 different front end devices. The A2 flash hider and bare muzzle for example slid back over 9 inches. The best break was precision armament that only slid back 2.35"! I'll be getting one soon!

Break down...
HM defense upper $640
416 triple hone 16" barrel
14" hand guard
Nib BCG
Flash hider
Charging handle
Upper
Mid gas tube and block

Spikes tactical lower $110
Magpul stock $60
Magpul grip $23
Magpul aluminium trigger guard $19
Magpul 20 round mag $13
POA precision single stage trigger $149
Cmmg lower kit $35
Tapco mil spec buffer kit $43
UTG 3-12x44 36 color scope and rings $122
UTG super duty bipod $32

Total $1246 for a $2000+ gun.

Nismo89 · 03-30-2015, 05:47 PM

that................... looks...................sick!!!!

synolimit · 03-30-2015, 05:59 PM

Quote:

Originally Posted by Nismo89

that................... looks...................sick!!!!

Wife has good taste. I pointed her in the right direction but she made all the calls, it's hers now.

Nismo89 · 03-30-2015, 06:36 PM

Quote:

Originally Posted by Scott@Synergy

Wife has good taste. I pointed her in the right direction but she made all the calls, it's hers now.

self defense is best defense

Rusty · 03-30-2015, 09:03 PM

If you think the AR15 has too much recoil. You got a soft shoulder.

Use a mercury tube in the stock. It will take most of the recoil out.

Colin MKV · 03-30-2015, 09:29 PM

im not that into guns. But I carry a S&W Shield 40 for personal/home protection.

03-18-2015, 06:53 AM	#3979 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	zensation brought over his AR Sunday to get a few pictures taken of it. Really digging the blue receiver, looks pretty cool. m4a1mustang, Nismo89, synolimit and 1 others like this. __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

03-24-2015, 07:16 PM	#3981 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,862 Drives: 2011 Nismo GM 6M Rep Power: 2684436	If anyone here is in to ballistic tables. Here is a good website. JBM - Calculations SouthArk370Z likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

03-24-2015, 10:39 PM	#3982 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	I removed posts that were clearly in violation of forum rules. I would like to again remind everyone that any types of solicitation sales are not allowed and are to be conducted off the forum. This is only for discussions. Thank You. __________________

03-24-2015, 10:44 PM	#3983 (permalink)
tvfreakazoid A True Z Fanatic Join Date: Jan 2009 Location: kommie kali Posts: 1,238 Drives: 2015 Audi S5; 6spd. Rep Power: 10324	My bad 2 by 2...hands of blue __________________ Mudders milk

03-30-2015, 05:35 PM	#3985 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	All done! First build complete... Got a proper mag, it's sighted in with some old reloads and shooting sub MOA. It was 6" low and 5" right and the scope worked perfect with 1/4" clicks. I hit bullseye first shot after 1 adjustment. Only complaint is it's got a good amount of recoil and take down is still tight! I youtubed best breaks and a guy did a sled test on 30 different front end devices. The A2 flash hider and bare muzzle for example slid back over 9 inches. The best break was precision armament that only slid back 2.35"! I'll be getting one soon! Break down... HM defense upper $640 416 triple hone 16" barrel 14" hand guard Nib BCG Flash hider Charging handle Upper Mid gas tube and block Spikes tactical lower $110 Magpul stock $60 Magpul grip $23 Magpul aluminium trigger guard $19 Magpul 20 round mag $13 POA precision single stage trigger $149 Cmmg lower kit $35 Tapco mil spec buffer kit $43 UTG 3-12x44 36 color scope and rings $122 UTG super duty bipod $32 Total $1246 for a $2000+ gun. Ghostvette likes this. __________________ 13 370z- Last edited by synolimit; 03-30-2015 at 05:40 PM.

03-30-2015, 05:47 PM	#3986 (permalink)
Nismo89 A True Z Fanatic Join Date: Mar 2011 Location: Colora, MD Age: 34 Posts: 15,831 Drives: daily Zen and woosah Rep Power: 37386	that................... looks...................sick!!!! synolimit likes this. __________________ Why yes.. Mike Rowe of Dirty Jobs, The Ford Commericals,Deadliest Catch.. is my cousin. Facebook i outta back hand you with my right hand! and call you b*tch!..... and im Left handed!

03-30-2015, 09:03 PM	#3989 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,862 Drives: 2011 Nismo GM 6M Rep Power: 2684436	If you think the AR15 has too much recoil. You got a soft shoulder. Use a mercury tube in the stock. It will take most of the recoil out. jshare1 likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

03-30-2015, 09:29 PM	#3990 (permalink)
Colin MKV Base Member Join Date: Mar 2015 Location: Lakewood Ranch Florida Age: 36 Posts: 45 Drives: 2010 370Z 6M Rep Power: 13	im not that into guns. But I carry a S&W Shield 40 for personal/home protection.