Anyone here into firearms?

robin · 08-22-2009, 07:22 PM

Quote:

Originally Posted by semtex

Just call POF and ask them if you're unsure.

good idea semtex..

Pushing_Tin · 08-26-2009, 01:01 PM

Anybody ever read this blog, it's pretty interesting.

Civilian Gun Self-Defense Blog

tvfreakazoid · 08-27-2009, 01:36 PM

Interesting. It seems most of the blogs that i looked through was from gun friendly states. I see a lot of florida. What is up with florida? I hear a lot of interesting crimes that happens down there. Probably too much radiation.

tvfreakazoid · 08-27-2009, 01:37 PM

Nope not sure. I will try to find someone to help me out.

Quote:

Originally Posted by semtex

Are you putting optics on it? If yes, it should be self-explanatory. If no, good luck.

tvfreakazoid · 08-27-2009, 01:40 PM

I will give a try. Just need to find a area in Sactown, CA to shoot that far. I'm looking to get a MI iron sight then eventually a scope. They are so expensive. I may just a cheap one.

Quote:

Originally Posted by bullitt5897

Like Semtex and others have said if your adding a scope or red dot of some type it should be self explanatory. However, for Iron sights your going to need a front Iron sight key (optics planet has a few). If it is a troy battle sight ur gonna need to modify the front sight key.

The best way to sight the sights in is to start at 50 or 100yd (Id recommend 100yd).
1) Flip your sights up make sure your rear windage sights are centered.
2) Make sure the sights are tightly fastened to the rail (they due tend to come loose over time)
3) Use a Bipod or bench rest and get centered on your target at 100yds.
4) squeeze off a round (note. if you have poor trigger control you will be all over the place and wont be able to get a consistent zero)
5) Ok you now know where your first Point of Impact is. if its low then adjust your front sight one to two clicks lower. If high then raise it the same.
6) Remember you want to basically walk your shots to the bulls eye so little changes will give you a consistent movement across the target and you wont get lost.
7) If the POI is right then you must adjust the rear windage sight to the left to pull your shot back into the target.

The rest is up to you. Be safe and have fun with the POF you will enjoy it! I am hitting less than 1.5 MOA out to 700yds with my POF 6.8 16"...

Trust me you will love the gun

semtex · 08-27-2009, 01:51 PM

Quote:

Originally Posted by tvfreakazoid

I will give a try. Just need to find a area in Sactown, CA to shoot that far. I'm looking to get a MI iron sight then eventually a scope. They are so expensive. I may just a cheap one.

Yes, they are expensive. I can't disagree with you there. If you do decide to go that route, I recommend taking a look at laruetactical.com -- they have lots of optic/mount combos.

BanningZ · 08-27-2009, 01:53 PM

Hey Semtex I applaud you for your knowledge in firearms.

Would you be able to help me find any info on my SKS? Its a Norinco. I've found similar ones on gunbroker, but never the exact model.

semtex · 08-27-2009, 02:00 PM

What kind of info are you looking for?

BanningZ · 08-27-2009, 02:14 PM

Quote:

Originally Posted by semtex

What kind of info are you looking for?

Well just anything and everything.

I know it fires a 7.62, I know its a blast to take out, and thats about it. I have been told, that its a hard to find model, and I had it completely disassembled and cleaned a couple of times, before I knew how to do it myself, and every time I get offers from people to purchase it. I know its not a big deal having an SKS, but I want to know why people might be so interested in it.

semtex · 08-27-2009, 02:24 PM

I'm no expert on SKS rifles, but I believe your Norinco has several things going for it. First, it's reputed to be one of the best quality SKS's. Secondly, they ceased being imported as a result of the assault weapons ban. And that dovetails into the third thing, which is that it's a sought-after collectible due to its rarity. It's the same situation as the HK 94, for example. Those things will fetch $4-5k easily, if you can find them.

Edit: Btw, it is a big deal to have one of these because of their rarity, which is why you keep getting offers. I'd hang onto it if I were you. I have a friend whose father in law has a small stash of these in his safe for future trading.

BanningZ · 08-27-2009, 02:26 PM

BanningZ · 08-27-2009, 02:26 PM

Is that picture okay to have posted up? I didn't know if it was an issue having the clip in.

Bullitt@UAMotorsports · 08-27-2009, 02:29 PM

alot of people are interested because of its rarity or the wow factor that you own an SKS. Personally I prefer a custom build AR-10 but thats just me i like my stuff custom and top of the line! In all reality its probably the wow factor or collector item appeal. SKS's are great guns hold onto it and enjoy!

I know when I first got my POF 6.8SPC I had offers of $6k for the gun and I was like HELL NO! its a 3yr waiting list buddy! I dont want to wait that long! lol

GL Banning and enjoy the SKS

semtex · 08-27-2009, 02:30 PM

Why would a picture of a gun with a clip in it be a no-no? If it is a no-no, then I'm in trouble (look at post 30). lol

BanningZ · 08-27-2009, 02:33 PM

Quote:

Originally Posted by semtex

Why would a picture of a gun with a clip in it be a no-no? If it is a no-no, then I'm in trouble (look at post 30). lol

I figured as much.

I just wanted to make sure. Any idea on its worth?

08-27-2009, 01:36 PM	#168 (permalink)
tvfreakazoid Track Member Join Date: Jan 2009 Location: cali Posts: 873 Drives: saturn 98 grayish m Rep Power: 6	Interesting. It seems most of the blogs that i looked through was from gun friendly states. I see a lot of florida. What is up with florida? I hear a lot of interesting crimes that happens down there. Probably too much radiation. __________________ One great movie!

08-27-2009, 01:53 PM	#172 (permalink)
BanningZ A True Z Fanatic Join Date: Nov 2008 Location: nowhere Posts: 5,487 Drives: 06' Nismo Frontier Rep Power: 17	Hey Semtex I applaud you for your knowledge in firearms. Would you be able to help me find any info on my SKS? Its a Norinco. I've found similar ones on gunbroker, but never the exact model. __________________ Become a Premium Member: Click HERE MB 06' Nismo VQ40DE

08-27-2009, 02:00 PM	#173 (permalink)
semtex Pruritus Ani Join Date: Jan 2009 Location: Behind enemy lines Age: 42 Posts: 5,638 Drives: People to drink Rep Power: 20	What kind of info are you looking for? __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

08-27-2009, 02:24 PM	#175 (permalink)
semtex Pruritus Ani Join Date: Jan 2009 Location: Behind enemy lines Age: 42 Posts: 5,638 Drives: People to drink Rep Power: 20	I'm no expert on SKS rifles, but I believe your Norinco has several things going for it. First, it's reputed to be one of the best quality SKS's. Secondly, they ceased being imported as a result of the assault weapons ban. And that dovetails into the third thing, which is that it's a sought-after collectible due to its rarity. It's the same situation as the HK 94, for example. Those things will fetch $4-5k easily, if you can find them. Edit: Btw, it is a big deal to have one of these because of their rarity, which is why you keep getting offers. I'd hang onto it if I were you. I have a friend whose father in law has a small stash of these in his safe for future trading. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf. Last edited by semtex; 08-27-2009 at 02:27 PM.

08-27-2009, 02:26 PM	#176 (permalink)
BanningZ A True Z Fanatic Join Date: Nov 2008 Location: nowhere Posts: 5,487 Drives: 06' Nismo Frontier Rep Power: 17	__________________ Become a Premium Member: Click HERE MB 06' Nismo VQ40DE

08-26-2009, 01:01 PM	#167 (permalink)
Pushing_Tin A True Z Fanatic Join Date: Nov 2008 Location: Eugene, OR Posts: 2,887 Drives: E63 AMG Rep Power: 12	Anybody ever read this blog, it's pretty interesting. Civilian Gun Self-Defense Blog

08-27-2009, 02:26 PM	#177 (permalink)
BanningZ A True Z Fanatic Join Date: Nov 2008 Location: nowhere Posts: 5,487 Drives: 06' Nismo Frontier Rep Power: 17	Is that picture okay to have posted up? I didn't know if it was an issue having the clip in. __________________ Become a Premium Member: Click HERE MB 06' Nismo VQ40DE

08-27-2009, 02:29 PM	#178 (permalink)
Bullitt@UAMotorsports Premium Member Join Date: Jan 2009 Location: www.Moto1Store.com Posts: 5,365 Drives: Twin Turbo Z34 Rep Power: 16	alot of people are interested because of its rarity or the wow factor that you own an SKS. Personally I prefer a custom build AR-10 but thats just me i like my stuff custom and top of the line! In all reality its probably the wow factor or collector item appeal. SKS's are great guns hold onto it and enjoy! I know when I first got my POF 6.8SPC I had offers of $6k for the gun and I was like HELL NO! its a 3yr waiting list buddy! I dont want to wait that long! lol GL Banning and enjoy the SKS __________________ http://i234.photobucket.com/albums/e...ignatureSM.jpg Keeping O.G.'s in our thoughts & Prayers: AK370Z, XwChriswX and Semtex. RIP SVTRacer Shop Cars: 2008 600hp GTM TT G37, 2009 1000hp+ GTM 4.5L TT 370z

08-27-2009, 02:30 PM	#179 (permalink)
semtex Pruritus Ani Join Date: Jan 2009 Location: Behind enemy lines Age: 42 Posts: 5,638 Drives: People to drink Rep Power: 20	Why would a picture of a gun with a clip in it be a no-no? If it is a no-no, then I'm in trouble (look at post 30). lol __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode