The New “What did you do with your Z today” (with off topic replies) XXXV

madwi · 03-01-2020, 08:49 AM

Quote:

Originally Posted by eastwest2300

ssup duudes

Leingod · 03-01-2020, 09:28 AM

Good morning guys

JARblue · 03-01-2020, 11:51 AM

Quote:

Originally Posted by bunk

When I changed out my brakes, I didnt notice at first, but the reservoir cap threads were a little worn and he motive bleeder stripped the threads even more on my Z. Ended up having to gravity bleed. I had a ton of air bubbles on each wheel.

Gotta be careful with that bleeder cap. That's why I like the steel one. It's easy once you've done it a few times and get the feel for it - the key is to make sure you seat the cap fully before turning. The threads on his reservoir are good.

So what I should have done is A. bleed all of the calipers a second time (since the reservoir emptied when we disconnected the first brake line) and B. turned the car on and checked brake pressure while the car was still in the air. It had been a long day and I was just tired; we knew we had time today to finish it up.

JARblue · 03-01-2020, 11:53 AM

Quote:

Originally Posted by SouthArk370Z

Has anyone ever had a fuel pump fail when the tank was empty? Pump went out on a friend's Suburban recently. We considered dropping the tank and changing the pump ourselves until we realized the 40+ gallon tank was about 3/4 full. Decided it was well worth paying a real mechanic to do the job.

I can understand that mentality

Quote:

Originally Posted by SouthArk370Z

We thought about doing that but we'd have to buy a pump that would be safe with gas (or siphon it out) and I turned my drum into a plating/de-rusting tank last Summer (full of sodium carbonate solution at the moment). Between the two of us, we probably have enough small gas cans but decided it wasn't worth the trouble. 20-30 years ago, we would have gone ahead with the job but we're both getting old and lazy.

It's fun when you're young and virile. It gets old real quick once you get old

Rusty · 03-01-2020, 02:52 PM

Getting ready to go to the movies and dinner. Going to see "Call of the Wild". Wifey wants to see it.

Spooler · 03-01-2020, 03:01 PM

Put the battery charger on the car. Just sitting around is not good for it.

BettyZ · 03-01-2020, 03:05 PM

Hitting the grocery for a month's worth of liquor and food before everyone else does. #coronavirus case @ the local hospital

Sent from my SM-G955U using Tapatalk

JARblue · 03-01-2020, 04:19 PM

Brake bleeding went well the second round. It was nice to be able to see the air bubbles. Test drive felt acceptable; the slightly off braking feel is likely attributed to brand new rotors and pads because the pedal pressure feels great

JARblue · 03-01-2020, 04:25 PM

GodSpeed dropped by in his Nismo

redondoaveb · 03-01-2020, 04:39 PM

Quote:

Originally Posted by JARblue

GodSpeed dropped by in his Nismo

Did he bring you steaks?

JARblue · 03-01-2020, 04:47 PM

Quote:

Originally Posted by redondoaveb

Did he bring you steaks?

Nope. In fact, he pointed out that I still owe him a dinner

bunk · 03-01-2020, 06:30 PM

P1606 code turned into P1091... :/

Zezus · 03-01-2020, 07:04 PM

Finally finished putting together the build thread for the honder. Go make fun of me for it.

Zingston · 03-01-2020, 07:08 PM

Quote:

Originally Posted by bunk

P1606 code turned into P1091... :/

So that's an improvement?

Rusty · 03-01-2020, 07:22 PM

Quote:

Originally Posted by bunk

P1606 code turned into P1091... :/

03-01-2020, 09:28 AM	#4187 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,053 Drives: In Circles Rep Power: 2684396	Good morning guys God-Speed, Rusty, Hotrodz and 4 others like this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

03-01-2020, 02:52 PM	#4190 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,867 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Getting ready to go to the movies and dinner. Going to see "Call of the Wild". Wifey wants to see it. God-Speed, Hotrodz, Ghostvette and 6 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

03-01-2020, 03:01 PM	#4191 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,517 Drives: 2013 Nismo 370z Rep Power: 2684391	Put the battery charger on the car. Just sitting around is not good for it. Rusty, Hotrodz, jchammond and 2 others like this.

03-01-2020, 03:05 PM	#4192 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684370	Hitting the grocery for a month's worth of liquor and food before everyone else does. #coronavirus case @ the local hospital Sent from my SM-G955U using Tapatalk Rusty, Hotrodz and redondoaveb like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

03-01-2020, 04:19 PM	#4193 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Brake bleeding went well the second round. It was nice to be able to see the air bubbles. Test drive felt acceptable; the slightly off braking feel is likely attributed to brand new rotors and pads because the pedal pressure feels great Rusty, Hotrodz, madwi and 6 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

03-01-2020, 06:30 PM	#4197 (permalink)
bunk A True Z Fanatic Join Date: Mar 2018 Location: Southern California Posts: 4,077 Drives: 2010 370z Roadster Rep Power: 2684369	P1606 code turned into P1091... :/ __________________ -Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace

03-01-2020, 07:04 PM	#4198 (permalink)
Zezus Enthusiast Member Join Date: Dec 2018 Location: Cincinnati Posts: 354 Drives: 2016 370z sport 6spd Rep Power: 50338	Finally finished putting together the build thread for the honder. Go make fun of me for it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) Cooking Edition	Leingod	The Lounge (Off Topic)	319	09-28-2021 10:10 PM
The New “What did you do with your Z today” (with off topic replies) XXXIV	Spoiler	The Lounge (Off Topic)	9999	01-24-2020 05:42 PM
The New "What did you do with your Z today" (with off topic replies) XXIII	eastwest2300	The Lounge (Off Topic)	10001	06-23-2016 09:21 AM
The New "What did you do with your Z today" (with off topic replies) XXII	eastwest2300	The Lounge (Off Topic)	10001	04-05-2016 08:15 PM