I've made some improvements to my garage

-ZS-Carpenter

Rafters are the angley ones, ceiling joists are the flat ones

Sent from my SM-G965U using Tapatalk

BettyZ

I used to call those "sky wood," but then my 4th grade teacher sent me to the social worker...

Sent from my SM-G955U using Tapatalk

__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods

Rusty

I need a bigger garage. I got 30 lbs of crap in a 5 lb garage. Can't even swing a dead cat over my head without hitting something.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Baronsmokes

No garage is ever big enough.

SouthArk370Z

That's where I was when I started this project. Found a receiver with 8-track recorder that I bought when I was in HS. Plugged it in and no lights. Glad I saved that all these years.

Just going to do some cleaning up and it has turned into a major project.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

BettyZ

I'm just impressed you've done what you've done in that coffin of a garage. I have a 2.5 car garage and it feels cramped if everything isn't put away.

__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods

cv129

Lol lol

__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield

SouthArk370Z

The computer cabinet is gutted!

Backed a pickup into the garage and dropped the tailgate. Only 3-4" difference between bottom of tape drive sled and tailgate. Unplugged wiring and slid the main tape drive unit onto the tailgate. Salvaged four 12.5"x19" circuit boards for wall "art." Moved pickup to curb and slid the tape unit onto the ground.

Managed to wrestle the tape drive sled onto garage floor and started adding pieces to my scrap metal bin. This thing is built like a tank. I've stripped everything off the sled that was bolted/screwed on and it still weighs about 50 pounds. I now have several dozen machine screws with star washers for my collection.
Trying to decide what to do with the sled. Welded construction so I can't easily take it apart. Since I have all the hardware to mount it in the cabinet, I may move the rails to the bottom and use it as a "subcabinet." I'd hate to scrap it - it's a well-built piece - but not sure I'll have a good use for it.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

SouthArk370Z

Haven't done much the last two days. Mostly "puttering around." Went through some boxes and threw away some more junk. Got the shop vac after the deteriorated sound deadening foam that got on the floor when I gutted the cabinet. Screwed some hooks into the wall and hung up some extension cords. Still looking for a good place to store the jack stands.

I did manage to get all my whet stones gathered up and in one box. I used to make trips to Hot Springs, AR, where they have a lot of rock shops (yep, ppl will pay good money for a shiny rock someone picked up off the ground in their backyard) and I could get various grades of whet stones (with small defects on one side) for cheap.

My buddy has just about convinced me to throw away the tape drive sled - it's heavy, has a barrier about halfway down the sled that cuts most of the space in half, yadda, yadda, yadda. I would like to give it to someone who could make use of it, but I doubt there's anyone like that nearby.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

JARblue

Post up a pic of the sled if you don't mind. Got a buddy in Sulphur Springs that might be interested and could pick it up.

__________________

SouthArk370Z

I'll try to post some pics tomorrow evening.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

SouthArk370Z

Uploaded some pics of the sled and a couple of pics of the garage (couldn't upload more than five pics). Nissan 370Z Forum - SouthArk370Z's Album: Sled and Garage

Yeah. I'm a crappy photographer. Sorry about that. Let me know if you need some closeups of the sled.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

SouthArk370Z

Had a Volvo in the garage the last few days, so I didn't get much done. Buddy's wife's car. He rebuilt the Park/Neutral switch. I did the important stuff like hold the light.

Did manage to set up a laptop with a larger screen for playing music - now we can see the titles from across the garage.

Plan on getting up early tomorrow so we can remove junk from the attic and install some insulation before it gets too hot. Put a remote temp sensor up there and it registered 120*F this afternoon.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

bunk

Mount a TV somewhere in your garage and stream from the Laptop.streaming stuff while doing car work would be sweet...

__________________
-Drop in K&N Filter -Invidia Gemini CBE -Z1 Oil Cooler -Swift Springs - EcuTek -Forgestar F14 -SPL Camber Links -Akebono BBK Upgrade -Z1 Premium SS Lines -SPL Diff Bushings -SPL FUCAs - BellRaceworks Diff Brace

BettyZ

By "stuff" you mean "porn" right?

Sent from my SM-G955U using Tapatalk

__________________
'14 MB Nismo | Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs.
Betty Mods