The New "What did you do with your Z today" (with off topic replies) XXVIII

JLarson · 03-19-2018, 12:16 PM

Quote:

Originally Posted by Leingod

Literally everything else is being shipped directly to Madwi's house. He has the hardware for the HFC's. Everything needed for the exhaust will be shipped direct to him from FI. He will also get an amazon package with new AEM filters for the intake. I will basically only be bringing the diffuser. And I plan to have the car up on jack stands the week before while I blast the demon bolts with every chemical possible. haha.

The only thing I am unsure of, is if the intakes need anything other than filters. I'll talk with him and double check that. "

exhaust - at Madwi's (Hardware being shipped direct to him)
intake - at Madwi's (Need to check hardware)
HFC's - at madwi's (In box with all hardware)
Side blades - at madwi's (self tap screws and tape)
Diffuser - will bring with me (glue and tape)
gt-r button - will bring with me (may get put on out of boredom)
fairlady badge - same as gt-r button
AEM filters - will be sent direct to madwi

I Think that's everything?

Only thing I'd check on is whether or not your kit has the breather hoses for your intakes. I believe you can make the stock ones fit, but it's potentially a little more work.

https://www.z1motorsports.com/z1-pro...es-p-4752.html

eastwest2300 · 03-19-2018, 12:16 PM

Quote:

Originally Posted by JLarson

Only thing I'd check on is whether or not your kit has the breather hoses for your intakes. I believe you can make the stock ones fit, but it's potentially a little more work.

https://www.z1motorsports.com/z1-pro...es-p-4752.html

yeah, its these small things im a little anxious about...

Leingod · 03-19-2018, 12:12 PM

The guy has a literal wheelbarrow full of parts in his garage. It'll be interesting regardless. hahaha

eastwest2300 · 03-19-2018, 12:15 PM

Quote:

Originally Posted by Leingod

The guy has a literal wheelbarrow full of parts in his garage. It'll be interesting regardless. hahaha

its a lot of work bro...

eastwest2300 · 03-19-2018, 12:16 PM

Im literally running this entire install through my head right now..

JARblue · 03-19-2018, 12:24 PM

Damn EW getting the $hit end of that deal

eastwest2300 · 03-19-2018, 12:30 PM

Quote:

Originally Posted by JARblue

Damn EW getting the $hit end of that deal

madwi · 03-19-2018, 05:27 PM

Quote:

Originally Posted by JARblue

Damn EW getting the $hit end of that deal

You shush your mouth.

eastwest2300 · 03-19-2018, 12:31 PM

brother, if I didnt enjoy working on the Z, trust me, I'd have no part of it..

JARblue · 03-19-2018, 12:34 PM

I recommend hitting the cat bolts with some PB Blaster as soon as you arrive. And keep hitting it every couple hours throughout the day. It's your best weapon against the demon bolt along with proper extensions/swivels and breaker bar.

Leingod · 03-19-2018, 12:39 PM

Quote:

Originally Posted by JARblue

I recommend hitting the cat bolts with some PB Blaster as soon as you arrive. And keep hitting it every couple hours throughout the day. It's your best weapon against the demon bolt along with proper extensions/swivels and breaker bar.

No worries jar. Already bought a bottle to hit the bolts with a week leading up to the drive. Figured I'd hit them before and after work each day.

JARblue · 03-19-2018, 12:41 PM

Quote:

Originally Posted by Leingod

No worries jar. Already bought a bottle to hit the bolts with a week leading up to the drive. Figured I'd hit them before and after work each day.

Even better

Rusty · 03-19-2018, 02:14 PM

Quote:

Originally Posted by JARblue

I recommend hitting the cat bolts with some PB Blaster as soon as you arrive. And keep hitting it every couple hours throughout the day. It's your best weapon against the demon bolt along with proper extensions/swivels and breaker bar.

And a 6ft section of pipe.

madwi · 03-19-2018, 05:30 PM

Quote:

Originally Posted by Rusty

And a 6ft section of pipe.

My fat *** along with the breaker bar, 1/2" extensions and pb blaster, we should be ok.

Rusty · 03-19-2018, 05:51 PM

Quote:

Originally Posted by madwi

My fat *** along with the breaker bar, 1/2" extensions and pb blaster, we should be ok.

Now, I'm worry. Make that a 8ft section of pipe. And a 3/4 drive breaker bar.

Remember to remove the O2 sensors first thing before doing ANY work on the exhaust.

03-19-2018, 12:12 PM	#3 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,060 Drives: In Circles Rep Power: 2684397	The guy has a literal wheelbarrow full of parts in his garage. It'll be interesting regardless. hahaha __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

03-19-2018, 12:16 PM	#5 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 91,020 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684552	Im literally running this entire install through my head right now.. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

03-19-2018, 12:24 PM	#6 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Damn EW getting the $hit end of that deal __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

03-19-2018, 12:31 PM	#9 (permalink)
eastwest2300 A True Z Fanatic Join Date: May 2010 Location: South FL Posts: 91,020 Drives: '16QX70/'21 Supra3.0 Rep Power: 2684552	brother, if I didnt enjoy working on the Z, trust me, I'd have no part of it.. __________________ Infiniti QX70 & Toyota Supra 3.0 Premium

03-19-2018, 12:34 PM	#10 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	I recommend hitting the cat bolts with some PB Blaster as soon as you arrive. And keep hitting it every couple hours throughout the day. It's your best weapon against the demon bolt along with proper extensions/swivels and breaker bar. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The New "What did you do with your Z today" (with off topic replies) XXVII	JARblue	The Lounge (Off Topic)	9999	11-26-2017 07:08 AM
The New "What did you do with your Z today" (with off topic replies) XXIV	JARblue	The Lounge (Off Topic)	10059	08-17-2016 12:08 PM
The New "What did you do with your Z today" (with off topic replies) XXIII	eastwest2300	The Lounge (Off Topic)	10001	06-23-2016 09:21 AM
The New "What did you do with your Z today" (with off topic replies) XXII	eastwest2300	The Lounge (Off Topic)	10001	04-05-2016 08:15 PM
The New "What did you do with your Z today" (with off topic replies) XVIII	eastwest2300	The Lounge (Off Topic)	10000	07-09-2015 07:48 PM