modded stock intake box?

ANMVQ · 10-02-2014, 07:10 AM

ok almost everything is here I will have pics tonight of all the parts, and I did a quick test fit last weekend and things looked good, BTW I'm mounting the adapter plate right the the rad support inline with the stock intake duct and going from there to behind the grill. Only will have to move the horn a bit

We'll see

ANMVQ · 10-03-2014, 08:28 AM

Ok hers what's going in,

ANMVQ · 10-04-2014, 10:35 AM

Ok s I started the install last night as today I'm driving the wife around for a fitness show

I started by mounting the adapter plates to the radiator support over the stock air ducking tunnel with self tapping screws, the in attached the 90 degree elbow an ran the 3inch intake piping hich wind up don behind the front bumper support ( I didn't like them down there just above the skid plate. And I also couldnt mount the CF air scoopes I bought. So I remived the intake piping and just attached the scoops right to the elbows. Looks good and I can hear them sucking air so they're working LOL. I took some pics but was dark and started to rain I take some more tomorrow. But here's a few for now .
I also bougt a aluminim blade for my table saw I'm going to make some more changes so stay tuned

ANMVQ · 10-04-2014, 10:36 AM

Phone won't let me adds pics I'll ipdate in an hour when I'm home getting an oil change :/

P's_Z · 10-04-2014, 10:51 AM

Good to hear, ill be waiting for pics!

Also, let us know if the butt dyno reports any gains

Jordo! · 10-04-2014, 03:22 PM

Looks good, and good luck -- but do you have a dyno from before they were added...?

ANMVQ · 10-05-2014, 08:32 AM

I do have a dyno but from a place I will never go to again (Horror story on here) , I Was think of going out an get a log or 2 to see the MAF readings

ANMVQ · 10-05-2014, 08:39 AM

So here's the pics , Going to go out to Pepboys and see if I can get a few more things to bracket these to the support in the middle

ANMVQ · 10-07-2014, 07:40 AM

Also dyno coming the 25th

ANMVQ · 11-01-2014, 09:02 AM

Strapping her down right now !

ANMVQ · 11-01-2014, 12:51 PM

285 WHP and 231 WHTQ . Will have sheets later when the get emailed to me . Pretty happy I have the overlay from my coupes run with stock manifold , Takedas and the same catBack and FI RHFC's. My coupe made 15 more WHP tho not sure if the tune needs work but that car really falls off up top compared to my the run

ANMVQ · 11-02-2014, 11:19 AM

Looks like the AF's were ? 12's started in the 14's and ending in the 12's( 12.2's) Needs to be leaner ?

10-02-2014, 07:10 AM	#31 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	ok almost everything is here I will have pics tonight of all the parts, and I did a quick test fit last weekend and things looked good, BTW I'm mounting the adapter plate right the the rad support inline with the stock intake duct and going from there to behind the grill. Only will have to move the horn a bit We'll see __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

10-04-2014, 10:35 AM	#33 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Ok s I started the install last night as today I'm driving the wife around for a fitness show I started by mounting the adapter plates to the radiator support over the stock air ducking tunnel with self tapping screws, the in attached the 90 degree elbow an ran the 3inch intake piping hich wind up don behind the front bumper support ( I didn't like them down there just above the skid plate. And I also couldnt mount the CF air scoopes I bought. So I remived the intake piping and just attached the scoops right to the elbows. Looks good and I can hear them sucking air so they're working LOL. I took some pics but was dark and started to rain I take some more tomorrow. But here's a few for now . I also bougt a aluminim blade for my table saw I'm going to make some more changes so stay tuned P's_Z likes this. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

10-04-2014, 10:36 AM	#34 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Phone won't let me adds pics I'll ipdate in an hour when I'm home getting an oil change :/ __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

10-04-2014, 10:51 AM	#35 (permalink)
P's_Z A True Z Fanatic Join Date: Apr 2013 Location: PR Posts: 1,530 Drives: Zeta Rep Power: 469	Good to hear, ill be waiting for pics! Also, let us know if the butt dyno reports any gains __________________ Zeta

10-04-2014, 03:22 PM	#36 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 417	Looks good, and good luck -- but do you have a dyno from before they were added...? __________________ Enjoy it. Destroy it.

10-05-2014, 08:32 AM	#37 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	I do have a dyno but from a place I will never go to again (Horror story on here) , I Was think of going out an get a log or 2 to see the MAF readings __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

10-07-2014, 07:40 AM	#39 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Also dyno coming the 25th __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

11-01-2014, 09:02 AM	#40 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Strapping her down right now ! __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

11-01-2014, 12:51 PM	#41 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	285 WHP and 231 WHTQ . Will have sheets later when the get emailed to me . Pretty happy I have the overlay from my coupes run with stock manifold , Takedas and the same catBack and FI RHFC's. My coupe made 15 more WHP tho not sure if the tune needs work but that car really falls off up top compared to my the run __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda, Last edited by ANMVQ; 11-02-2014 at 11:18 AM.

11-02-2014, 11:19 AM	#42 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Looks like the AF's were ? 12's started in the 14's and ending in the 12's( 12.2's) Needs to be leaner ? __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stock or Modded???	speedlover	Nissan 370Z General Discussions	33	10-16-2012 06:40 PM
WTT Modded headlights for stock	Vinny	Parts for sale (Private Classifieds)	7	04-04-2011 03:42 PM
370z stock to fully modded in 3 days! before & After.	chameleon	Engine & Drivetrain	10	11-30-2009 11:00 AM