Custom ported and CNC throttle bodies, upper and lower manifolds by Synergy Composite

2012z · 11-19-2014, 06:42 PM

Quote:

Originally Posted by synolimit

Well wish harder next time haha. I got a new iPhone, apparently I'm not getting any texts from non iPhone uses. Tuner couldn't make it and I didn't know ahead of time. We are rescheduling me for later this week.

PS, the back to back dynoing for the parts and testing is still going down the 30th. My tune is different even though I have all the same parts but they are already installed and tuned for. We are just checking the tunes health. Tuner was nice enough to discount some of the work. Stay tuned mostly for the 30th though!!!!

Cant wait for dyno run ! I am down for the set up as long as we see good gains on the dyno (I feel like it would) Keep us posted! Thanks

synolimit · 11-20-2014, 06:44 AM

Sadly this will come to and end. I've responded to trips as seen below and as you can read I'm sure you all can understand. There's no point in me doing this if I have to raise my rates only to cover fees. Why buy milk at the store when you have the cow at home for free!

While I have to it seems this is going to hurt everyone now sadly. I started this before Z1 and I'm only trying to help people. I'm not in this for the money. I make almost nothing doing this!! By the time I ship, answer 100 emails, the $20 is nothing. If I raise my rates to get my $20 back because I have to pay vender fees then everyone can just go do this themselves. Everyone knows I use MaXbore for the porting. I'm saving them money by doing this because I'm a retuning customer and he's making all the money. If I have to raise my rates because of vender fees then no one will use me anymore and just go staight to the source. This isn't fair to any of us as a community.

Scott

V8Killer · 11-20-2014, 08:49 AM

Scott,

I appreciate all the hard work you have done to make this available to the Z community. I've noticed more intake mods coming out ever since you started this thread I think it's awesome more people are contributing to the "mod bug". IMHO if I had enough people on the sidelines wanting to get this modification done then I would inflate the price. Look at your competition out there their prices are very outrageous. On the other end of the spectrum if you just want to avoid the headache I totally understand as well. No matter what your choice is I really appreciate your help.

synolimit · 11-20-2014, 09:09 AM

Quote:

Originally Posted by V8Killer

Scott,

I appreciate all the hard work you have done to make this available to the Z community. I've noticed more intake mods coming out ever since you started this thread I think it's awesome more people are contributing to the "mod bug". IMHO if I had enough people on the sidelines wanting to get this modification done then I would inflate the price. Look at your competition out there their prices are very outrageous. On the other end of the spectrum if you just want to avoid the headache I totally understand as well. No matter what your choice is I really appreciate your help.

Thanks for the reply and you're welcome!!

You are correct, the competition doesn't stand a chance but I think anyone here could find a local machine shop or call MaXbore to get this done. If I raise prices then I don't see why they wouldn't just go to him direct and save some money except the fact that I'm more convenient. If the customer does it himself he'll have to take everything off, ship it, and then wait a good two weeks to get everything back. So I guess it could be worth it for me to raise the price a little bit but being winter I'm sure a lot of people here would be okay with waiting two weeks to get them back. Idk I'm still on the fence about this. 1-2 sets a month I've been doing doesn't even cover the vender fees here. If I have to pay more vender fees on more forums then it's over. I can't swing that. Hell I'm already in trouble buying all the over head I can't sell now. Maybe Z1 wants 8 sets of TB's and uppers and lowers

EZT · 11-20-2014, 10:21 AM

Did I miss something somewhere? Syno, I am guessing this awesome deal is coming to an end relatively soon due to vendor fees?

synolimit · 11-20-2014, 12:19 PM

Quote:

Originally Posted by EZT

Did I miss something somewhere? Syno, I am guessing this awesome deal is coming to an end relatively soon due to vendor fees?

Yes and no. I mean they locked my FS thread so it's dead for awhile till they lock this if I keep talking about it.

synolimit · 11-21-2014, 11:42 AM

I have paid sponsorship. If I can change my name I'll now be Scott@SynergyComposites and my partner will be Shawn@SynergyComposites who will be doing the porting and also can make anything out of prepreg carbon fiber!! That's dry carbon fiber if you didn't know. Unlike a lot that use fiberglass backing with only a layer or two of wet carbon, he uses the real stuff! Prepreg needs a autoclave and its how all supercars parts and bodies are made. My first item we are looking into is a Full CF GT wing! Stands and all! Stay tuned!

Scott

PS, example below!

carlitos_370z · 11-21-2014, 12:12 PM

damn can wait to see that

FPenvy · 11-21-2014, 12:20 PM

hmmmmm prepreg CF front strut bar sounds tasty

synolimit · 11-21-2014, 12:23 PM

Quote:

Originally Posted by FPenvy

hmmmmm prepreg CF front strut bar sounds tasty

Ill have to get on that.

Some small stuff to start...3D canards and nose inlets for CAI, more air to the top of the radiator, or whatever you can think of.

carlitos_370z · 11-21-2014, 12:45 PM

looks great dude!!! at least on the pics looks like a great quality parts

FL 4Motion · 11-21-2014, 11:43 PM

How about prepreg cf nismo rc brake duct knockoffs that are sized to match up to the stillen brake ducting kit w/o needing to fab up anything?

Cf IM manifold that's already got the porting for better flow ala z1 etc already in the design? Pretty and functional.

synolimit · 11-22-2014, 01:14 AM

Quote:

Originally Posted by FL 4Motion

How about prepreg cf nismo rc brake duct knockoffs that are sized to match up to the stillen brake ducting kit w/o needing to fab up anything?

Cf IM manifold that's already got the porting for better flow ala z1 etc already in the design? Pretty and functional.

I'll pass that along, good ideas though. I'd like a set myself.

synolimit · 11-22-2014, 06:29 AM

this is not the dyno going down on the 30th but today is the day im going back to see the tunes safety!!!! again wish me luck!!

synolimit · 11-22-2014, 03:38 PM

Here we go!!!!

11-20-2014, 06:44 AM	#362 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	Sadly this will come to and end. I've responded to trips as seen below and as you can read I'm sure you all can understand. There's no point in me doing this if I have to raise my rates only to cover fees. Why buy milk at the store when you have the cow at home for free! While I have to it seems this is going to hurt everyone now sadly. I started this before Z1 and I'm only trying to help people. I'm not in this for the money. I make almost nothing doing this!! By the time I ship, answer 100 emails, the $20 is nothing. If I raise my rates to get my $20 back because I have to pay vender fees then everyone can just go do this themselves. Everyone knows I use MaXbore for the porting. I'm saving them money by doing this because I'm a retuning customer and he's making all the money. If I have to raise my rates because of vender fees then no one will use me anymore and just go staight to the source. This isn't fair to any of us as a community. Scott __________________ 13 370z-

11-20-2014, 08:49 AM	#363 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Scott, I appreciate all the hard work you have done to make this available to the Z community. I've noticed more intake mods coming out ever since you started this thread I think it's awesome more people are contributing to the "mod bug". IMHO if I had enough people on the sidelines wanting to get this modification done then I would inflate the price. Look at your competition out there their prices are very outrageous. On the other end of the spectrum if you just want to avoid the headache I totally understand as well. No matter what your choice is I really appreciate your help. __________________ "Punch" Too much to list and a baby shot of nitrous....

11-20-2014, 10:21 AM	#365 (permalink)
EZT Track Member Join Date: Mar 2011 Location: Gainesville Posts: 535 Drives: 09 370z Rep Power: 315	Did I miss something somewhere? Syno, I am guessing this awesome deal is coming to an end relatively soon due to vendor fees? Bananaz likes this.

11-21-2014, 12:12 PM	#368 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	damn can wait to see that synolimit likes this.

11-21-2014, 12:45 PM	#371 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7585	looks great dude!!! at least on the pics looks like a great quality parts synolimit likes this.

11-21-2014, 11:43 PM	#372 (permalink)
FL 4Motion A True Z Fanatic Join Date: Feb 2009 Location: FL Posts: 4,776 Drives: Baby Shark Rep Power: 701615	How about prepreg cf nismo rc brake duct knockoffs that are sized to match up to the stillen brake ducting kit w/o needing to fab up anything? Cf IM manifold that's already got the porting for better flow ala z1 etc already in the design? Pretty and functional.

11-22-2014, 06:29 AM	#374 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3388	this is not the dyno going down on the 30th but today is the day im going back to see the tunes safety!!!! again wish me luck!! V8Killer likes this. __________________ 13 370z-

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom ported and CNC throttle bodies, upper and lower manifolds	synolimit	Exhaust/Intake	297	06-25-2021 09:13 AM
[WTB] Lower intake manifolds! Uppers and TB's welcome!!	synolimit	Parts for sale (Private Classifieds)	0	11-19-2014 02:02 AM
Smokeys dyno, ported TB's, manifolds etc	synolimit	Tuning	8	08-15-2014 11:11 AM
can the throttle bodies be taken off?	boomboom	Engine & Drivetrain	9	11-03-2013 01:46 PM
Kinetix 370Z/G37 Velocity Upper Intake Manifolds - Z1 Motorsports	Dustin@Z1	Intake/Exhaust	151	03-18-2013 09:37 AM