$780 to install G3 intake

Cmike2780 · 02-06-2013, 05:52 PM

Installation should be half that price. Even the intake is pretty much what Stillen charges. They even had a sale last month. I'd PM FB Nissan and see if he can give you a better deal.

AlexRaymond19 · 02-06-2013, 06:33 PM

Or take a trip to Maine, ill do it for free!

RUFFSTUFF · 02-06-2013, 07:50 PM

Quote:

Originally Posted by AlexRaymond19

Or take a trip to Maine, ill do it for free!

The industry standard is beer and pizza.

Sales@AAMComp · 02-07-2013, 05:47 AM

The difficulty in installing cold air intakes is relatively low, as anyone who can turn a wrench the right way could install these. Just make sure you have plenty of time and patience when doing it. Same goes with removing/reinstalling the front bumper. For someone who has done it before it could take a few minutes.. but for a first timer, it could be confusing. Also make sure not to overtighten the MAF sensor when swapping them over to the Stillens, those screw/bolts are super fragile.

axmea? · 02-07-2013, 09:02 PM

I'm too lazy to DIY. Let the professionals do it. Lou Roc from Amplified Motorsports did it for way less.

1st · 02-07-2013, 11:22 PM

Diys are fun and rewarding knowing you can do it. I hope that installation fee comes with Kay Y Jelly and an anal beginners kit because that booty hole gona hurt. For that type of cash you can get yourself a shift knob, fog light, harness, Gtr start button, weather tech custom floor mats.

Dlm6568 · 02-08-2013, 07:28 AM

I've down CAI installs on both my BMW 330ci and my Acura TL, but neither one required removal of the bumper. That's really muy only concern.

RUFFSTUFF · 02-08-2013, 07:35 AM

It is surprisingly easy to remove the bumper. It's like Nissan said "Hey, someone is going to shove a filter in here, let's just put some bolts and stuff to hold it together."

jpritche · 02-08-2013, 07:37 AM

Quote:

Originally Posted by RUFFSTUFF

It is surprisingly easy to remove the bumper. It's like Nissan said "Hey, someone is going to shove a filter in here, let's just put some bolts and stuff to hold it together."

I have taken my bumper off probably 10 times now. The first time took like 30 minutes. Now it takes like 10

eastwest2300 · 02-08-2013, 08:39 AM

Quote:

Originally Posted by edub370

that is a TERRIBLE price

eastwest2300 · 02-08-2013, 08:42 AM

Quote:

Originally Posted by jpritche

I have taken my bumper off probably 10 times now. The first time took like 30 minutes. Now it takes like 10

I thought the same thing, I was a little apprehensive the first time I did it, now Im like, this isnt sh1t..haha

tturbo370z · 02-08-2013, 07:01 PM

I checked with a local dealer in the same intake and install and they said they same 3hours crap and $1000! I'm with everyone else to do it yourself. Get some beer and a buddy who is also handy and make an afternoon out of it

RUFFSTUFF · 02-08-2013, 07:18 PM

On second thought... That sounds very reasonable... If I was the local dealer...

faya · 02-27-2013, 12:24 AM

If you do not feel confident on what to do, let pros do it. We pay for peace of mind. Just my 2 cents..

Sent from my iPhone using Tapatalk- faya baby!

RUFFSTUFF · 02-27-2013, 04:22 AM

Quote:

Originally Posted by faya

If you do not feel confident on what to do, let pros do it. We pay for peace of mind. Just my 2 cents..

Sent from my iPhone using Tapatalk- faya baby!

Here's your change...

02-06-2013, 05:52 PM	#16 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 30	Installation should be half that price. Even the intake is pretty much what Stillen charges. They even had a sale last month. I'd PM FB Nissan and see if he can give you a better deal. __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

02-06-2013, 06:33 PM	#17 (permalink)
AlexRaymond19 Track Member Join Date: Jun 2011 Location: Maine Posts: 771 Drives: 2010 Nissan 370z Rep Power: 16	Or take a trip to Maine, ill do it for free! __________________ 2010 370Z Touring MT \| Stillen \| Motordyne \| Momentum\| Z1 \| Fast Intentions \| Advant Garde \| RE11 \| Swift \| SPC \| Quaife \| Whiteline \| Evo R \| 322RWHP 259ft-lb Mustang

02-07-2013, 05:47 AM	#19 (permalink)
Sales@AAMComp A True Z Fanatic Join Date: Jul 2012 Location: Annapolis Junction, MD Posts: 4,079 Drives: GT-R Rep Power: 22	The difficulty in installing cold air intakes is relatively low, as anyone who can turn a wrench the right way could install these. Just make sure you have plenty of time and patience when doing it. Same goes with removing/reinstalling the front bumper. For someone who has done it before it could take a few minutes.. but for a first timer, it could be confusing. Also make sure not to overtighten the MAF sensor when swapping them over to the Stillens, those screw/bolts are super fragile. DEpointfive0 likes this. __________________ Tyler Day, Technical Sales TylerD@aamcompetition.com 301-497-9214 Direct AAM Competition \| YouTube channel \| LIKE us on Facebook!

02-07-2013, 09:02 PM	#20 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,243 Drives: WELL ZED PW 6MT Rep Power: 53243	I'm too lazy to DIY. Let the professionals do it. Lou Roc from Amplified Motorsports did it for way less. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

02-07-2013, 11:22 PM	#21 (permalink)
1st A True Z Fanatic Join Date: Jul 2012 Location: I 80 Biz U.S. 50 Posts: 1,710 Drives: Platinum Z Rep Power: 1617	Diys are fun and rewarding knowing you can do it. I hope that installation fee comes with Kay Y Jelly and an anal beginners kit because that booty hole gona hurt. For that type of cash you can get yourself a shift knob, fog light, harness, Gtr start button, weather tech custom floor mats. Gibby1113 likes this.

02-08-2013, 07:28 AM	#22 (permalink)
Dlm6568 Base Member Join Date: Jan 2013 Location: New Jersey Posts: 96 Drives: 2012 GM 7AT Tour Rep Power: 14	I've down CAI installs on both my BMW 330ci and my Acura TL, but neither one required removal of the bumper. That's really muy only concern.

02-08-2013, 07:35 AM	#23 (permalink)
RUFFSTUFF Base Member Join Date: Apr 2012 Location: GEORGIA Posts: 233 Drives: 2012 370Z TOURING Rep Power: 15	It is surprisingly easy to remove the bumper. It's like Nissan said "Hey, someone is going to shove a filter in here, let's just put some bolts and stuff to hold it together." __________________ 2012 370Z Touring w/ NAV, Black Powdercoat, aFe Takeda CAI, Invidia Gemini Ti-tip Catback Exhaust, DVD/NAV bypass

02-08-2013, 07:01 PM	#27 (permalink)
tturbo370z Track Member Join Date: May 2012 Location: Az Posts: 622 Drives: 09 370z sport 6mt Rep Power: 129	I checked with a local dealer in the same intake and install and they said they same 3hours crap and $1000! I'm with everyone else to do it yourself. Get some beer and a buddy who is also handy and make an afternoon out of it DarkJak likes this. __________________ JUST STUFF 800whp700wtq Tturbo370z 800whp build https://instagram.com/jdm_370z

02-08-2013, 07:18 PM	#28 (permalink)
RUFFSTUFF Base Member Join Date: Apr 2012 Location: GEORGIA Posts: 233 Drives: 2012 370Z TOURING Rep Power: 15	On second thought... That sounds very reasonable... If I was the local dealer... __________________ 2012 370Z Touring w/ NAV, Black Powdercoat, aFe Takeda CAI, Invidia Gemini Ti-tip Catback Exhaust, DVD/NAV bypass

02-27-2013, 12:24 AM	#29 (permalink)
faya Enthusiast Member Join Date: Dec 2012 Location: Central Florida Posts: 360 Drives: 13 370z nismo Rep Power: 14	If you do not feel confident on what to do, let pros do it. We pay for peace of mind. Just my 2 cents.. Sent from my iPhone using Tapatalk- faya baby! __________________ H&R / Swift Spec-R / Fast Intentions

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Misfire code after install g3 intake	370zbob	Intake/Exhaust	6	01-17-2013 04:52 PM
Stillen G3 Intake Install	joshs09slvrZ	DIY Section (Do-It-Yourself)	15	05-12-2012 08:43 PM
Intake Install Help!!	mputiri1	South East Region	22	10-26-2011 08:30 AM
Install of Still Gen3 Intake	dang370z	Intake/Exhaust	1	08-29-2010 05:16 AM
Short ram intake install help?	Diversion	Intake/Exhaust	5	07-04-2009 04:42 PM