Fast Intentions exhaust is here!

F.I. Inc. · 03-19-2012, 02:27 PM

Quote:

Originally Posted by V-10

Finally pulled the trigger on my CBE, thanks Tony for kicking ***.

You did? My apologies if I missed you or something because I do not recognize your screen name on my build list. Let me know if there is a screw up on my end...

Thanks, Tony

Dembflyr · 03-19-2012, 02:28 PM

Quote:

Originally Posted by Ron

oh boy 3 weeks?.. I was under the impression we were a week behind and that it was going to ship this week or the next

.. oh well, need to cancel reservations for Nismo Fiesta, darn it!

Darn! I was hoping to have it earlier as well.

It is what it is and I know it'll be well worth the wait.

I might just have to bolt up the stock exhaust for a few weeks. That would be a sleeper and a half.

Ron · 03-19-2012, 02:38 PM

Quote:

Originally Posted by F.I. Inc.

Three weeks to hopefully have all 4 of the GTM compatible 3" systems in the mail. Your system is the first and is almost done. It would be completely done if you did not put a wrench in my program with these extended tips! I will give this back half to #2. I need to finish the rear jigs and then build your back half in them. Once it is confirmed that it fits, it will be in the mail to you. Hopefully your system will be in the mail sometime next week!

Hopefully that clears it up for you and you do not need to cancel your reservations.

Thanks, Tony

bwahaha oops.. Thanks Tony.

Dembflyr · 03-19-2012, 03:04 PM

Quote:

Originally Posted by Ron

bwahaha oops.. Thanks Tony.

There's always one in every group.

roplusbee · 03-19-2012, 03:06 PM

So the Greddy compatible 3" TDXs will be constructed after the GTM ones?

elliotty · 03-19-2012, 03:18 PM

Quote:

Originally Posted by F.I. Inc.

Three weeks to hopefully have all 4 of the GTM compatible 3" systems in the mail. Your system is the first and is almost done. It would be completely done if you did not put a wrench in my program with these extended tips! I will give this back half to #2. I need to finish the rear jigs and then build your back half in them. Once it is confirmed that it fits, it will be in the mail to you. Hopefully your system will be in the mail sometime next week!

Hopefully that clears it up for you and you do not need to cancel your reservations.

Thanks, Tony

Hope I am not throwing more wrenches in the program, but were you planning on doing the same on mine, Tony? I'd like the tips to sit as best as possible on my Nismo, too!

Thank you, sir!

roplusbee · 03-19-2012, 03:47 PM

Quote:

Originally Posted by elliotty

Hope I am not throwing more wrenches in the program, but were you planning on doing the same on mine, Tony? I'd like the tips to sit as best as possible on my Nismo, too!

Thank you, sir!

Oh Noez! Looks like I need to give Tony a call.........

XwChriswX · 03-19-2012, 09:43 PM

Tony, with production ramping up for the 3" exhaust, have you been able to get some pics/videos yet of it? Just wondering if you're close to making the 3" Release thread. If you need some help with the building of it, let me know and I can type it up while you're doing the building.

That way we can keep this thread open for 2.5" orders/inquiries... Just a thought brotha.

mpp9 · 03-19-2012, 11:35 PM

Who on here has the non-resonated exhaust with stock cats? I'm thinking about going that route but haven't been able to hear one in person to decide for myself.

For anyone who could shed any light, as long as you keep it under 3K rpm is the non-resonated tame enough to drive around in a residential neighborhood without getting glares?

F.I. Inc. · 03-20-2012, 11:36 AM

Quote:

Originally Posted by mpp9

Who on here has the non-resonated exhaust with stock cats? I'm thinking about going that route but haven't been able to hear one in person to decide for myself.

For anyone who could shed any light, as long as you keep it under 3K rpm is the non-resonated tame enough to drive around in a residential neighborhood without getting glares?

Non resonated with stock cats sounds the best to me! Do not get me wrong, I love our other options but in terms of just sound, that has my vote.

Call me directly if you have any questions.

Thanks, Tony

KaienZ34 · 03-20-2012, 11:39 AM

Sorry to thread jack, but i've asked in other threads with no answer....

Does the fast intentions catback work/fit with the varis rear diffuser?

Thanks for any help.

anthonyy · 03-20-2012, 12:06 PM

Quote:

Originally Posted by KaienZ34

Sorry to thread jack, but i've asked in other threads with no answer....

Does the fast intentions catback work/fit with the varis rear diffuser?

Thanks for any help.

Seeing as how it fits the evo-r type diffusers with the use of some washers on the hangers, you should be okay.

FPenvy · 03-20-2012, 12:13 PM

Quote:

Originally Posted by mpp9

Who on here has the non-resonated exhaust with stock cats? I'm thinking about going that route but haven't been able to hear one in person to decide for myself.

For anyone who could shed any light, as long as you keep it under 3K rpm is the non-resonated tame enough to drive around in a residential neighborhood without getting glares?

i'm running non-res CBE and non-res test pipes and i dont get too many glares with it but it definitely turns heads lol

mrcoolguyface · 03-20-2012, 12:51 PM

I have non res CBE and tps

It's definitely loud... But not too loud. You can drive it tame if you want. It's doable

Sent from my DROID BIONIC using Tapatalk

mpp9 · 03-20-2012, 01:00 PM

Quote:

Originally Posted by F.I. Inc.

Non resonated with stock cats sounds the best to me! Do not get me wrong, I love our other options but in terms of just sound, that has my vote.

Call me directly if you have any questions.

Thanks, Tony

At work, sent you PM Tony. Thanks.

03-19-2012, 03:06 PM	#7895 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	So the Greddy compatible 3" TDXs will be constructed after the GTM ones? __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

03-19-2012, 09:43 PM	#7898 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	Tony, with production ramping up for the 3" exhaust, have you been able to get some pics/videos yet of it? Just wondering if you're close to making the 3" Release thread. If you need some help with the building of it, let me know and I can type it up while you're doing the building. That way we can keep this thread open for 2.5" orders/inquiries... Just a thought brotha. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

03-20-2012, 11:39 AM	#7901 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	Sorry to thread jack, but i've asked in other threads with no answer.... Does the fast intentions catback work/fit with the varis rear diffuser? Thanks for any help. __________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

03-20-2012, 12:51 PM	#7904 (permalink)
mrcoolguyface Track Member Join Date: Sep 2011 Location: Philadelphia Posts: 553 Drives: 15 Nissan 370Z GM M6 Rep Power: 14	I have non res CBE and tps It's definitely loud... But not too loud. You can drive it tame if you want. It's doable Sent from my DROID BIONIC using Tapatalk __________________ [B] [PROJECT VERONIKA][Sport][K&N-Typhoons][Matte black vinyl roof wrap][MODSHACK inspired custom phone mount][GTR Red button] [F.I. CBE][F.I. NR-TP]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	Venomous01	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	01-25-2013 09:27 AM
the Fast and the....	arcticreaver	The Lounge (Off Topic)	1	05-04-2009 04:48 PM
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	zero	Nissan 370Z Photos / Spyshots / Video / Media Gallery	33	02-26-2009 09:14 PM
Fast Intentions needs prototype!!!	F.I. Inc.	Intake/Exhaust	28	02-16-2009 06:35 AM

03-19-2012, 11:35 PM	#7899 (permalink)
mpp9 Base Member Join Date: Apr 2009 Location: Pittsburgh Posts: 103 Drives: 2012 sti Rep Power: 16	Who on here has the non-resonated exhaust with stock cats? I'm thinking about going that route but haven't been able to hear one in person to decide for myself. For anyone who could shed any light, as long as you keep it under 3K rpm is the non-resonated tame enough to drive around in a residential neighborhood without getting glares?