Fast Intentions exhaust is here! (continued)

Rusty · 10-05-2012, 10:06 PM

Quote:

Originally Posted by KingJoseph

I'm sorry to repeat my question, but my exhaust is just a few weeks away... does anybody have any idea how many rwhp the FI exhaust will net me over the factory Nismo exhaust? No way it's a downgrade power-wise, right? I guess it's too late anyway, but I'm surprised nobody has been able to quantify this. Come to think of it, I'm surprised I didn't do this homework beforehand.

Bone stock 282 HP and 230 Tor on a Mustang dyno. 320 HP and 269 Tor.with LTH's, 12" Res, Stillen G3 cai, and a UpRev tune on a DynoJet.

KingJoseph · 10-06-2012, 12:44 AM

Quote:

Originally Posted by Rusty

Bone stock 282 HP and 230 Tor on a Mustang dyno. 320 HP and 269 Tor.with LTH's, 12" Res, Stillen G3 cai, and a UpRev tune on a DynoJet.

Haha, hmm... I know you've told me that before, but hard to parse out how much is the exhaust and how much is the LTHs, G3s, and tune.

I plan to do the tune eventually, but will probably keep the stock intakes w/ post-MAF tubes and drop in filters... and already have HFCs; probably won't do the LTHs. I've heard horror stories about the install.

Z-Girl 12 · 10-06-2012, 04:01 AM

18" resonators...maybe it'll grow on me. But its been 3 days lol.

Quote:

Originally Posted by bdub561

Did you get resonators?

axmea? · 10-06-2012, 12:58 AM

Quote:

Originally Posted by Z-Girl 12

Love the craftsmanship...excellent quality....great customer service. The carbon fiber canisters r jus gorgeous. I lov how they r almost undetectable on my black Z. But its jus 2 loud for my taste...

Then I should be happy with mine. Non-resonated carbon fiber......5 weeks out. Feels like eternity. Will get HFC once my warranty expires. To be installed where all great exhausts come from. His shop is 5 minutes from where I work. The perks of living in SoCal......aside from the great weather of course.

Sounds like you're one of the few who are not convincingly and entirely happy with it because of volume. If you have the 18" res then that's pretty much the end of the road. The compliments you get will probably change your opinion but if you decide this is not for you, you could still sell it and then get a Motordyne

PaulZ370 · 10-08-2012, 07:06 AM

Quote:

Originally Posted by Z-Girl 12

Love the craftsmanship...excellent quality....great customer service. The carbon fiber canisters r jus gorgeous. I lov how they r almost undetectable on my black Z. But its jus 2 loud for my taste...

The sound will settle down quite a bit after you put a few miles on the system (a few hundred miles), especially when warmed up. I have the 18" Resonated CBE and Resonated High Flow Cats (all FI), but still, at cold start-up it shakes the whole house and I'm sure my neighbors can hear it nice and loud... however, once the RPM's drop (30 seconds later?) the sound is still deep and rumbly but a lot less noisy. I usually do creep out of my subdivision in first gear at low rpm's to keep the noise down. Once warmed up though, the exhaust is at a perfect note: at idle, you can just hear the deep rumble, but when I put my foot in it, it sounds ."..like a Ferrarri..." (I'm told - not making this up!). So, my advice is - be patient, it'll get there. Now a small caveat: not sure about the Carbon Canisters if they are louder than the stainless, but I'm sure that there shouldn't be that much dffference. Are you still on your stock cats by the way?

Z-Girl 12 · 10-09-2012, 08:44 PM

Quote:

Originally Posted by PaulZ370

The sound will settle down quite a bit after you put a few miles on the system (a few hundred miles), especially when warmed up. I have the 18" Resonated CBE and Resonated High Flow Cats (all FI), but still, at cold start-up it shakes the whole house and I'm sure my neighbors can hear it nice and loud... however, once the RPM's drop (30 seconds later?) the sound is still deep and rumbly but a lot less noisy. I usually do creep out of my subdivision in first gear at low rpm's to keep the noise down. Once warmed up though, the exhaust is at a perfect note: at idle, you can just hear the deep rumble, but when I put my foot in it, it sounds ."..like a Ferrarri..." (I'm told - not making this up!). So, my advice is - be patient, it'll get there. Now a small caveat: not sure about the Carbon Canisters if they are louder than the stainless, but I'm sure that there shouldn't be that much dffference. Are you still on your stock cats by the way?

Hey! I'm syoll on my stock cats and plan 2 stick with them lol. But i think u were right...either i hav gotten use 2 the sound or they hav "calmed down" a bit

i love the throaty sound. Well worth every penny! I plan 2 get it realigned 2morrow so the canisters r even. Thanks bunches for ur input! I soooo luv my Z...it sits jus right and sounds jus right!

Chemy · 10-10-2012, 10:05 AM

Question on the FI CBE. I have the SS 18" Res on order with HFC's. If I decided down the road to go 12" res or non-res, how much hassle is it? Curious on what would need to be replaced.

Thanks!

Felix 808 · 10-10-2012, 10:10 AM

Quote:

Originally Posted by Chemy

Question on the FI CBE. I have the SS 18" Res on order with HFC's. If I decided down the road to go 12" res or non-res, how much hassle is it? Curious on what would need to be replaced.

Thanks!

Tony explained to me that it is easier going from Non-res to 12 to 18 because you just have to cut out material & put the resonators in. The reverse of that is going to cause someone to weld in extentions to the pipes. It will not look as clean either due to the patch work.

HTH

PaulZ370 · 10-10-2012, 12:19 PM

Quote:

Originally Posted by Z-Girl 12

Hey! I'm syoll on my stock cats and plan 2 stick with them lol. But i think u were right...either i hav gotten use 2 the sound or they hav "calmed down" a bit

i love the throaty sound. Well worth every penny! I plan 2 get it realigned 2morrow so the canisters r even. Thanks bunches for ur input! I soooo luv my Z...it sits jus right and sounds jus right!

I'd say both - they calmed down, and you got used to them...

...And yes, the Z is perfect now down to its exhasut tips - sound included!

binary0x01 · 10-10-2012, 12:55 PM

Installing @ SpecialtyZ right now

bdub561 · 10-05-2012, 11:18 PM

Carbon doesnt change the sound of the exhaust

FPenvy · 10-06-2012, 08:28 AM

Quote:

Originally Posted by bdub561

Carbon doesnt change the sound of the exhaust

Do u mean the carbon fiber cans? If so then it does change the sound compared to the SS cans.

bdub561 · 10-06-2012, 10:32 PM

Quote:

Originally Posted by FPenvy

Do u mean the carbon fiber cans? If so then it does change the sound compared to the SS cans.

Oh, I wasn't aware that they changed the sound. Just the weight.

Quote:

Originally Posted by Z-Girl 12

18" resonators...maybe it'll grow on me. But its been 3 days lol.

Lol, exhaust usually quiets down a little bit after it breaks in.

FPenvy · 10-06-2012, 08:31 AM

Quote:

Originally Posted by Rusty

The driver side is a PITA! Drop the exhaust from the cats back took about 45 minutes. The right side header took about 1 and a half the drop the cat and factory manifold together, and install the FI header. The left side took about 5 hrs overall. The factory heat shield is what makes it hard. Only 3 bolts hold it on. Once you get them off. You have to turn/twist the heat shield upside down to remove it. That took about 3hrs to figure it out on how to do it. Once I got that out of the way. The factory manifold and cat was out in an hour. The FI header took about an hour to install. Now if I do it again. I could cut that time by half.

Sounds like you had a rough time lol only took me like 15 min to drop the exhaust but the cats and those damn demon bolts took me about 3 hours total to drop em. Test pipes went on easily and the cbe portion took maybe 10 min to bolt on

sparky · 10-06-2012, 10:13 PM

Just finished my install of an 18" CBE. Went well except the first bolt had to be the demon!
Sounds and looks great so I'm happy. My only issue is side to side alignment of the drivers can. Couldn't get it centered no matter what I tweaked. Anyone had this problem or know a fix? I've let Tony know too.

10-10-2012, 10:05 AM	#7 (permalink)
Chemy Base Member Join Date: Aug 2012 Location: Atlanta, GA Posts: 109 Drives: Nismo 370Z, Pearl Rep Power: 14	Question on the FI CBE. I have the SS 18" Res on order with HFC's. If I decided down the road to go 12" res or non-res, how much hassle is it? Curious on what would need to be replaced. Thanks! __________________ 2012 Nismo, PW #512. FI CBE SS w/12" Res, Stillen g3's, UpRev, Kenwood 9990HD, Focal speakers and tweeters, Wicked Cas corner box with JL 10" w6, 35% ceramic tint, full clear bra.

10-10-2012, 12:55 PM	#10 (permalink)
binary0x01 Track Member Join Date: Jun 2012 Location: Idaho Posts: 892 Drives: 2012 6-SPEED 3.7L Z Rep Power: 15	Installing @ SpecialtyZ right now __________________ Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

10-05-2012, 11:18 PM	#11 (permalink)
bdub561 Base Member Join Date: Jul 2012 Location: Wellington, FL Age: 39 Posts: 239 Drives: '12 370z Rep Power: 14	Carbon doesnt change the sound of the exhaust __________________ ( Click to show/hide ) \|1990 240sx\|SR20det\| \|2012 370z\|Berk HFC\|H&R Drop\|SPC\|20/25\|F.I TDX 12" Res.\|

10-06-2012, 10:13 PM	#15 (permalink)
sparky Track Member Join Date: Jul 2011 Location: Vancouver, BC Posts: 642 Drives: 12 370Z GM AT Rep Power: 16	Just finished my install of an 18" CBE. Went well except the first bolt had to be the demon! Sounds and looks great so I'm happy. My only issue is side to side alignment of the drivers can. Couldn't get it centered no matter what I tweaked. Anyone had this problem or know a fix? I've let Tony know too. __________________ 2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 02:32 PM
Fast Intentions exhaust just ordered	Jmigs81	Intake/Exhaust	32	02-12-2012 03:39 PM
Fast Intentions Exhaust	Mark Gomez	Intake/Exhaust	13	05-19-2011 07:51 PM
ARK Exhaust vs. Fast Intentions	dnasty370z	Intake/Exhaust	61	09-06-2010 06:25 PM