GT-R R35 Plenum Test Fitment on my VQ37HR

ChrisUR

the kit I can offer if everything works will consist of the following parts:

- GT-R plenum lower intake manifold adapter (as shown in the pictures)
- 2x 12mm custom fuel rails for stock or aftermarket injectors
- 1x OEM Nissan gasket for GT-R plenum
- 2x OEM Nissan gasket for 370Z head2lower_manifold
- all hardware needed like washers, nuts and bolts

optional parts:
if you want to keep the stock fuel system:
- adapter from the factory FPR to a Y-outlet block with 2x -6AN outlets
- 2x braided teflon fuel lines to each fuel rail with -6AN connectors

if you want to upgrade to a return system you can route two separate fuel lines to each fuel rail. On the firewall side of the fuel rail there is a -6AN plug which can be removed to convert to a true dual feed rail setup.

additional optional parts:
- OEM Nissan GT-R R35 upper plenum

we can even supply larger fuel rails with 15mm or 17mm if anybody wants to run very large injectors and needs it !

for pricing etc. I cannot say yet as I want to finish the prototype and dyno testing first and then have to calculate to cost per unit based on how many of you are interested in this special upgrade.

Chris

__________________
ProStreet N1 exhaust | ProStreet N1 Y-Pipe | STILLEN G3 Intake | NST Pulley Kit
EIBACH Pro-Springs | EIBACH Pro-Spacers | EIBACH Sway Bars | SEIBON GT2 Rear Wing
MOCAL Oil Cooler 25row| STILLEN TransCooler | STILLEN PS Cooler | STILLEN Front Fascia