ARK Muffler Cans really uneven!

ZedSled · 08-04-2011, 04:52 PM

I had my Berk HFC's and ARK GRIP CBE installed last weekend by a performance shop where I live. I made sure they propped up the Xpipe to avoid the cross member rattling problem so no rattles there. However, the passenger side muffler can hangs MUCH lower than the drivers side. My car isnt even lowered and the passenger side muffler can has scraped the ground a couple of times while going over bumps.

How can this be fixed while keeping the exhaust tips even? I want to lower my car but cant because the passenger exhaust can will scrape on everything.

6MT · 08-04-2011, 04:58 PM

Quote:

Originally Posted by ZedSled

I had my Berk HFC's and ARK GRIP CBE installed last weekend by a performance shop where I live. I made sure they propped up the Xpipe to avoid the cross member rattling problem so no rattles there. However, the passenger side muffler can hangs MUCH lower than the drivers side. My car isnt even lowered and the passenger side muffler can has scraped the ground a couple of times while going over bumps.

How can this be fixed while keeping the exhaust tips even? I want to lower my car but cant because the passenger exhaust can will scrape on everything.

Let's see how bad this looks, please.

ZedSled · 08-04-2011, 05:10 PM

Will try to post pics later but I know this is a common problem with the ARK CBE and was wondering how other ARK owners fixed this problem.

TeamARK · 08-04-2011, 05:15 PM

Start from the Y pipe to the back. Tighten each side and adjust the flanges while tightening the bolt. Its best to have a friend hold the mufflers in place while you tighten the bolts together. If you have any questions please give us a call at 909.391.1275

Alex

ZedSled · 08-04-2011, 05:26 PM

Thanks for the quick reply Alex. I will try this method this weekend.

TeamARK · 08-04-2011, 05:28 PM

send me pictures direct to alex@arkperformanceusa.com if you can. i will try and help you out as much as I can. By the end of this, you will have a perfect sitting exhaust.

JollyGoodChap · 08-05-2011, 12:41 PM

does it hang lower than the FI exhaust?

ZedSled · 08-05-2011, 02:31 PM

Quote:

Originally Posted by JollyGoodChap

does it hang lower than the FI exhaust?

I wouldnt know JollyGoodChap. Dont have any experience with the FI exhaust. Cant wait until this weekend so I can get under my car and see if I can even the mufflers out.

BalanBro · 08-08-2011, 08:49 AM

There is a good bit of clearance in the holes for the flanges on each muffler. Loosen the bolts a bit, realignment the flanges and then tighten, making sure not to let it shift while tightening. I dialed out most of the unevenness that way. Passenger side is still a hair lower and seems to be the case on most of the photos I've seen.

TeamARK · 08-08-2011, 11:34 AM

Zedsled. any updates on this? I want to know if you were able to have this adjusted.

ZedSled · 08-08-2011, 12:07 PM

Quote:

Originally Posted by TeamARK

Zedsled. any updates on this? I want to know if you were able to have this adjusted.

I sent you an email with pics. I was unable to solve this problem with the recommended methods. The passenger side still hangs about 1-1/2 inches lower than the drivers side. Please check your email and get back to me.

TeamARK · 08-08-2011, 12:26 PM

PM me your phone # and We will be able to take care of this.

Mozen · 08-08-2011, 01:50 PM

Quote:

Originally Posted by JollyGoodChap

does it hang lower than the FI exhaust?

Yes it does. Unfortunately the ARK exhaust is one of the lowest on the market. Specifically the lowest part of the exhaust is the flanges. My car is slightly lowered (3/4s of an inch) and its been an issue for me that has caused my mufflers to scrape and then get misaligned from repeated impact. Love the exhaust and the sound of it is fantastic but it sucks that it is so low.

delusional · 08-08-2011, 03:29 PM

Quote:

Originally Posted by Mozen

Yes it does. Unfortunately the ARK exhaust is one of the lowest on the market. Specifically the lowest part of the exhaust is the flanges. My car is slightly lowered (3/4s of an inch) and its been an issue for me that has caused my mufflers to scrape and then get misaligned from repeated impact. Love the exhaust and the sound of it is fantastic but it sucks that it is so low.

yeah another member on here has the ark and is lowered. his flange is flattened from scraping it so much

Methodical4u · 08-08-2011, 03:43 PM

Quote:

Originally Posted by delusional

yeah another member on here has the ark and is lowered. his flange is flattened from scraping it so much

that might be... but it just sounds so damn good

08-04-2011, 04:52 PM	#1 (permalink)
ZedSled Base Member Join Date: Apr 2011 Location: Dallas Posts: 38 Drives: 370Z 40th Anniv M6 Rep Power: 13	ARK Muffler Cans really uneven! I had my Berk HFC's and ARK GRIP CBE installed last weekend by a performance shop where I live. I made sure they propped up the Xpipe to avoid the cross member rattling problem so no rattles there. However, the passenger side muffler can hangs MUCH lower than the drivers side. My car isnt even lowered and the passenger side muffler can has scraped the ground a couple of times while going over bumps. How can this be fixed while keeping the exhaust tips even? I want to lower my car but cant because the passenger exhaust can will scrape on everything.

08-04-2011, 05:15 PM	#4 (permalink)
TeamARK Track Member Join Date: Jul 2009 Location: CHINO Posts: 957 Drives: Black 350z/370z Rep Power: 16	Start from the Y pipe to the back. Tighten each side and adjust the flanges while tightening the bolt. Its best to have a friend hold the mufflers in place while you tighten the bolts together. If you have any questions please give us a call at 909.391.1275 Alex Fhjkalfhu likes this.

08-08-2011, 08:49 AM	#9 (permalink)
BalanBro Enthusiast Member Join Date: Apr 2009 Location: NJ Posts: 318 Drives: 40th Anniv. 370Z Rep Power: 1111	There is a good bit of clearance in the holes for the flanges on each muffler. Loosen the bolts a bit, realignment the flanges and then tighten, making sure not to let it shift while tightening. I dialed out most of the unevenness that way. Passenger side is still a hair lower and seems to be the case on most of the photos I've seen. __________________ 2012 Mercedes C63 AMG P31 Sedan, ROW, aFe, Eurocharged Dyno Tune. 438WHP/415WTQ 2010 SOLD: 40th Anniversary 370z

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TOP SECRET Oil Catch Cans and Oil Caps	Baker	Drivetrain/Engine	18	08-28-2012 10:12 AM
Uneven front camber	tjlazer	Brakes & Suspension	14	12-01-2010 08:12 PM
uneven exhaust tips	darthanakin23	Intake/Exhaust	0	07-24-2010 05:54 PM
Do my berks cbe tips look uneven?	azn370z	Intake/Exhaust	57	03-18-2010 10:33 PM

08-04-2011, 05:10 PM	#3 (permalink)
ZedSled Base Member Join Date: Apr 2011 Location: Dallas Posts: 38 Drives: 370Z 40th Anniv M6 Rep Power: 13	Will try to post pics later but I know this is a common problem with the ARK CBE and was wondering how other ARK owners fixed this problem.

08-04-2011, 05:26 PM	#5 (permalink)
ZedSled Base Member Join Date: Apr 2011 Location: Dallas Posts: 38 Drives: 370Z 40th Anniv M6 Rep Power: 13	Thanks for the quick reply Alex. I will try this method this weekend.

08-04-2011, 05:28 PM	#6 (permalink)
TeamARK Track Member Join Date: Jul 2009 Location: CHINO Posts: 957 Drives: Black 350z/370z Rep Power: 16	send me pictures direct to alex@arkperformanceusa.com if you can. i will try and help you out as much as I can. By the end of this, you will have a perfect sitting exhaust.

08-05-2011, 12:41 PM	#7 (permalink)
JollyGoodChap Enthusiast Member Join Date: Aug 2010 Location: Lust Angeles Posts: 328 Drives: Z34 Rep Power: 14	does it hang lower than the FI exhaust?

08-08-2011, 11:34 AM	#10 (permalink)
TeamARK Track Member Join Date: Jul 2009 Location: CHINO Posts: 957 Drives: Black 350z/370z Rep Power: 16	Zedsled. any updates on this? I want to know if you were able to have this adjusted.

08-08-2011, 12:26 PM	#12 (permalink)
TeamARK Track Member Join Date: Jul 2009 Location: CHINO Posts: 957 Drives: Black 350z/370z Rep Power: 16	PM me your phone # and We will be able to take care of this.