Gauge selection

nomodsjk

You get that to work with the nav screen then put me on the list. That's a must have!

binary0x01

This will fit into the cubby?

__________________
Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

GaleForce

Yes, that screen will fit in the cubby.

__________________

Cell

Will you sell it as a package with the screen/mold/program? What program are you planning to use?

GaleForce

Yes, as long as if there is enough interest.

The interface/program is as shown above, it's unique to the manufacturer. I am told this will work with OBD2, but the information displayed is slower than using dedicated sending units.

__________________

Nixlimited

Yep, factory nav screen is what I want. And OBDII would be amazing because it would save me the cost of many sender units.

__________________
Car Sold! Pleasure being a part of the Z community.
New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

aszyd

What architecture is the controller module? ARM, x86? Is it just software and we provide our own controller like a Pi or Arduino?

__________________
Competition Clutch|Fast Intentions|Maxbore|NST|Setrab|Stillen|Tomei|Uprev| Z1
Avant Garde|SPC|Stance|Whiteline
Aerojacket|Seibon|Tanabe|TRS|TWM

GaleForce

It's a complete system, you can configure the sending units for your needs at the time of ordering. It normally comes with the 4.3" LCD but I'm looking into having this interface with the factory Nav too.

I don't know what the architecture is.

If this is more than you need, you can do two readings per "page" on a 1.7" OLED screen that will fit in a 52mm housing.

__________________

whiteZ34

Everything sounds great Gale! But when it comes down to it, what would you consider a baseline for the gauges being that it's going to be so customizable, turn out time possibly and prices? I do not mean to be rude in anyway about this but our cars do cost a good penny to upgrade haha. I'm definitely interested, also interested in possibly doing defi gauges where the oil, volt and clock are. In my own opinion is to keep the car looking stock as possible so that to the untrained eye, you would not suspect boost.

__________________
R/T Built motor, wiseco 9:1 Pistons, Eagle H-beam rods, ARP L-19| BP kit, PTE 6766, EPS 70mm TB, GTR Intake, PRS lower conversion| ID1000cc, CJM Twin pump 340&255, PRS Rails, CJM fuel return| Fast Intentions| R/T Tuned, 660WHP 596WTQ at 18lbs. 93 octane

GaleForce

I was originally looking at a multi readout gauge to fit my Premium single pod pillar so guys could leave the factory triple gauges as is, then add the single 52mm gauge. Example, AFR and boost for FI applications, or Oil Pressure and Water Temp for NA application, in the same gauge along with the factory oil temp, battery, and clock.

Personally I didn't see a need to go the extravagant route of having a screen with "pages" of readings. I simply put it out there as an option, some people are interested so I'm looking into it further for them. You can't get anymore stealth if this can be integrated with the factor nav screen.

The forum members need to decide a good base line, or get a group that is committed to buy (with deposits), the gauge(s) they want with the reading(s) they want so we can make a big order and get a better deal on pricing. If people are serious, we can move on to the next step, pricing and lead time.

There are a lot of options out there if you want to replace the triple gauges, get three 52mm gauges of your choice, install them, enjoy. You'll love the Defi gauges, they are a quality, well made product. I was looking for options for the people that don't want to remove the triple gauges, or just want more readings in general, or want to have their choice of readings in one gauge.

__________________

aszyd

I do need something to replace the clock in my triple gauges, and my exhaust does not have a bung for wideband. I would probably be interested in 52mm OBD2. The factory nav option also sounds good. Gauges everywhere!

__________________
Competition Clutch|Fast Intentions|Maxbore|NST|Setrab|Stillen|Tomei|Uprev| Z1
Avant Garde|SPC|Stance|Whiteline
Aerojacket|Seibon|Tanabe|TRS|TWM

ghostbusters

Sorry for the thread revival, but is there an update to this? Very keen on having a neat install rather than multiple gauges.

Rob298mx

Anything on the nav integration Gale?

__________________
2010 Nissan 370z F.I. TT

GaleForce

Look at the Carbon Signal one, or Zada Tech.

__________________

Rob298mx

I saw those but nothing that we can utilize the stock nav unit and maybe connect through the AV ports..?

__________________
2010 Nissan 370z F.I. TT