CJM S1 RFS: Your 600hp Fuel System - Made Easy

Mitco39

Its going to be quite hard to get it lower with just the way you have to work to get the holes drilled (I drilled to help the self tapping screws bite). You could go lower if you had a dremel and a 45deg end on it to get it lower. Also be sure to make sure they are careful of the hard lines on the other side of that piece. I had to cut the screws down so they wouldn't hit them.

I got very lucky that the regulator didnt hit when I put it all back together, I mean I wont ever really have to touch it again anyways. And if I do it will be because of something I would have done with the brace off anyways.

__________________
2007 Chevy Duramax - EFILive Tuned By Me
2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me
The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her
My Build --> http://www.the370z.com/members-370z-...39s-build.html