CJM Mini FP Gauge Kit

zguynate · 03-28-2014, 03:20 PM

Ill probably be ordering this. I just wont tell the wife about it lol.

O&G · 03-28-2014, 03:49 PM

CJM ftw as usual! Good job Charles!

UruZai · 03-28-2014, 04:13 PM

These would make life easy for diagnosing fuel system! Gonna have to pick one up. In for pics installed and anodized

jwick · 03-28-2014, 07:05 PM

Quote:

Originally Posted by phunk

Looks like my normal wholesale price on it is $102.50 + shipping.

Sold. How soon until you have the anodized ones? Also PM me a price for the adapter (no gauge) and that GReddy pressure sender kit shipped to 77042.

Chuck33079 · 03-28-2014, 07:08 PM

Quote:

Originally Posted by jwick

Sold. How soon until you have the anodized ones? Also PM me a price for the adapter (no gauge) and that GReddy pressure sender kit shipped to 77042.

PM him a price for that plus one additional setup (adapter+gauge). Might as well save the shipping and he's doing his build in my garage.

ENT-Z · 03-28-2014, 09:21 PM

This seems like a great idea. PM price of anodized and non-anodized to 63119 please.

TopgunZ · 03-28-2014, 10:10 PM

Gdamn genious! :-) Ill take one! No gauge. 80229. PM me...Thanks!

megalapagas · 03-29-2014, 03:04 AM

Wow, this can definitely come in handy for my nitrous build....hey phunk just out of cutiosity there shouldn't be any problem if the gauge is inside the hood with all that heat will it? Just cutious seeing as summer is around the corner and ttexas heat is horrifying

Kojack · 03-29-2014, 11:33 AM

This shouldn't be any different if it's was to be installed in G37?

phunk · 03-29-2014, 02:50 PM

Quote:

Originally Posted by ivory08

This shouldn't be any different if it's was to be installed in G37?

No trouble in a G, and should also fit in a HR 350z with the gauge.

phunk · 03-29-2014, 02:57 PM

Quote:

Originally Posted by megalapagas

Wow, this can definitely come in handy for my nitrous build....hey phunk just out of cutiosity there shouldn't be any problem if the gauge is inside the hood with all that heat will it? Just cutious seeing as summer is around the corner and ttexas heat is horrifying

Good question.

These gauges are pretty common to put in engine bays. They have been around a long time. I wont say that I have never seen one go bad in my life, but its definitely not very common.

I have had the same gauge in the same location on my 370z for roughly 3 years now. Photo attached. That was a custom fitting that we welded and machined on to just "get it done" on the spot those years ago. It has held up for me in daily driving conditions and pretty bad heat/humidity that we get up here.

So while I cannot promise that the gauge will last forever, I can confidently say that chances are great it will last a very long time... and that if it does ever fail, they are very inexpensive to replace (about $25 retail).

phunk · 03-29-2014, 03:02 PM

Quote:

Originally Posted by TopgunZ

Gdamn genious! :-) Ill take one! No gauge. 80229. PM me...Thanks!

Quote:

Originally Posted by ENT-Z

This seems like a great idea. PM price of anodized and non-anodized to 63119 please.

Quote:

Originally Posted by Chuck33079

PM him a price for that plus one additional setup (adapter+gauge). Might as well save the shipping and he's doing his build in my garage.

Quote:

Originally Posted by jwick

Sold. How soon until you have the anodized ones? Also PM me a price for the adapter (no gauge) and that GReddy pressure sender kit shipped to 77042.

I am going to get the item up on the website in the next couple hours and I will post back here and PM everyone interested.

jwick · 03-29-2014, 04:32 PM

Quote:

Originally Posted by phunk

No trouble in a G, and should also fit in a HR 350z with the gauge.

At least, I cant imagine any. I suppose if the G hood line slants down further it could possibly conflict, but I think it is unlikely. I will post back if I get confirmation one way or the other.

I'm putting mine on a G. I took a look at it Thursday night and I see no fitment issues.

megalapagas · 03-29-2014, 06:29 PM

Quote:

Originally Posted by phunk

Good question.

These gauges are pretty common to put in engine bays. They have been around a long time. I wont say that I have never seen one go bad in my life, but its definitely not very common.

I have had the same gauge in the same location on my 370z for roughly 3 years now. Photo attached. That was a custom fitting that we welded and machined on to just "get it done" on the spot those years ago. It has held up for me in daily driving conditions and pretty bad heat/humidity that we get up here.

So while I cannot promise that the gauge will last forever, I can confidently say that chances are great it will last a very long time... and that if it does ever fail, they are very inexpensive to replace (typically about $20-24 retail).

Badass phunk then put ne down for this aswell, or until its available in your website ill place the order thanks.

COSMO · 03-29-2014, 07:26 PM

It's look really cool but wouldn't it be best in the cabin so you can monitor it while driving when it would be most important? Hmm let me see what my fuel pressure is while idling................

03-28-2014, 03:20 PM	#31 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,053 Drives: 09 370z Rep Power: 73	Ill probably be ordering this. I just wont tell the wife about it lol. phunk likes this. __________________ 2009 370z touring w/sports package

03-28-2014, 03:49 PM	#32 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 41 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	CJM ftw as usual! Good job Charles! OMGWTFBBQ, phunk, jwick and 1 others like this. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

03-28-2014, 04:13 PM	#33 (permalink)
UruZai Track Member Join Date: Aug 2012 Location: Hawaii Posts: 531 Drives: '13 370Z SR 6MT Rep Power: 13	These would make life easy for diagnosing fuel system! Gonna have to pick one up. In for pics installed and anodized phunk likes this.

03-28-2014, 10:10 PM	#37 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Gdamn genious! :-) Ill take one! No gauge. 80229. PM me...Thanks! __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

03-29-2014, 03:04 AM	#38 (permalink)
megalapagas Enthusiast Member Join Date: May 2013 Location: McAllen,TX Posts: 457 Drives: '10 370Z Tour A/T Rep Power: 11	Wow, this can definitely come in handy for my nitrous build....hey phunk just out of cutiosity there shouldn't be any problem if the gauge is inside the hood with all that heat will it? Just cutious seeing as summer is around the corner and ttexas heat is horrifying __________________ GTM 34 Row Oil Cooler \| K&N Drop Ins w/ Z1's Post MAF Tubes \| F.I Non-Res'd 2.5" T.P w/ CF CBE \| Axis Wheels \| Piecing together My Own Custom T4 Top Mount Single Turbo Kit Still in the works \|

03-28-2014, 09:21 PM	#36 (permalink)
ENT-Z Enthusiast Member Join Date: Feb 2009 Location: St. Louis, MO Posts: 460 Drives: 09 MB 6MT 370Z Rep Power: 16	This seems like a great idea. PM price of anodized and non-anodized to 63119 please.

03-29-2014, 11:33 AM	#39 (permalink)
Kojack Base Member Join Date: Oct 2012 Location: USA Posts: 144 Drives: G37s Rep Power: 12	This shouldn't be any different if it's was to be installed in G37?

03-29-2014, 07:26 PM	#45 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	It's look really cool but wouldn't it be best in the cabin so you can monitor it while driving when it would be most important? Hmm let me see what my fuel pressure is while idling................

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mini cat cel fix	Zedx	Intake/Exhaust	10	03-09-2017 02:41 PM
One Mini I would like to get into.	Mitco39	Other Vehicles	1	11-16-2012 09:09 PM
The Not-so-Mini	scottIN	Other Vehicles	4	06-20-2012 07:16 PM
How do you remove Gauge Cover & cover for tri gauge??	Carbon_z	Exterior & Interior	4	11-26-2010 09:07 PM
What happened to the tire pressure gauge and speedo in the middle gauge cluster?	rbratton	Nissan 370Z General Discussions	33	01-24-2009 10:28 PM