Throttle body nitrous kit

Originally Posted by luigi90210

its the type of nitrous kit, Zex is using intake foggers, this nitrous express kit uses throttle body plates to spray the nitrous into the intake manifold, than you also have direct port nitrous which is foggers installed directly into the intake manifold spraying down directly into your valves(this isnt possible on our stock manifold, we would need an all metal manifold like the kinetix prototype intake manifold)

Originally Posted by Nissanboy

Yes it is. Under the plastic plenum is a metal manifold. You can tap it and put direct nitrous there. Its right before the intake valves.

Originally Posted by luigi90210

but where will you run the lines?

there isnt much room tapping into the manifold like that

Originally Posted by Nissanboy

In the valley (between the heads) there's plenty of room. The first link shows how they tapped it in for methanol but you can just copy the same idea with the proper lines for nitrous.

It'll be tight but still plenty of room IMO

http://i313.photobucket.com/albums/l...S/P1070502.jpg

2012-02-29_16-20-14_425.jpg Photo by 2bad240 | Photobucket