Throttle body nitrous kit

luigi90210 · 03-07-2014, 04:01 AM

Quote:

Originally Posted by DEpointfive0

How much in extras and crap do you have to buy?
And how much extra labor on the install

not much, just a bottle warmer, remote bottle opener, purge kit, window switch, TPS switch, bottle pressure gauge and n2o to fill the bottle(give or take $800)

install is easy enough to DIY, shouldnt take more than a day tbh

price difference between this kit and the zex 350z HR kit is about $500

Quote:

Originally Posted by RICAN

i don't know bout this one... but i know dynotune doesn't come with window switch/wide open throttle switch....so you have to buy one and you will need a wide band also and a purge kit!!....that's as basic as you can go!!...or i would go!!......zex kits are pretty good also...but you would need to add a window switch,wide band and purge kit!!......also as basic as i would go on the zex kit!!!..plus zex regulates your fuel depending on how pressure your nitrous has!!....so you never to lean or rich!!..

why would i need a wideband? the 370z has one stock that i can pull reading from straight off the ECU

but i did forget about the built in controller the Zex kit has with their HR kit

i wonder if i could use these plates and the zex kit to create a throttle body zex kit, do you know if the Zex kit is 100% bolt on from the HR 350z to the 370z?

RICAN · 03-07-2014, 02:37 PM

Quote:

Originally Posted by luigi90210

why would i need a wideband? the 370z has one stock that i can pull reading from straight off the ECU

but i did forget about the built in controller the Zex kit has with their HR kit

i wonder if i could use these plates and the zex kit to create a throttle body zex kit, do you know if the Zex kit is 100% bolt on from the HR 350z to the 370z?

i know the Z has a wide band factory ..but i wont always have a laptop in my car to data log..so i wouldn't mind have a wideband gauge just to make me feel better...

i don't see why couldn't you use the plate with the zex kit!!....all it does is eliminate the nozzles for the plates!!

im almost positive is 100% compatible with the 370z....i pm Joe from z speed asking him the same question but he never answer me!!

luigi90210 · 03-07-2014, 03:04 PM

Quote:

Originally Posted by RICAN

i know the Z has a wide band factory ..but i wont always have a laptop in my car to data log..so i wouldn't mind have a wideband gauge just to make me feel better...

i don't see why couldn't you use the plate with the zex kit!!....all it does is eliminate the nozzles for the plates!!

im almost positive is 100% compatible with the 370z....i pm Joe from z speed asking him the same question but he never answer me!!

ah, see i can pull everything up on my phone using torque whenever i need to lol but i understand what you're saying(i just think gauges are a little old school)

im going to have to look more into this cause if i cant do direct port nitrous(without swapping to a different intake manifold at least), i think throttle body injection would be the next best thing

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
indivisible throttle body	kbalza	Engine & Drivetrain	18	08-07-2013 12:16 AM
Throttle body ???	ScotyBRAVO	Intake/Exhaust	18	06-25-2013 06:38 AM
Throttle body fingerprint?	torpedo2k	Exterior & Interior	12	03-12-2011 09:05 AM
Throttle Body	Fabsnoop	Engine & Drivetrain	1	09-15-2010 02:19 AM
Impul Throttle Body Kit, Anyone Here Have It?	nightfire	Engine & Drivetrain	4	07-23-2009 08:36 PM