GTM Performance Engineering: MHI Twin Turbo Official Release

Alstann · 01-05-2014, 10:33 PM

Im still fully in, waiting patiently. I really do have lots of faith that this will be a great turbo kit, but every week I swing closer to ringing them up and cancelling. I have the funds, abd I want to be turbo'd.

LIL_G13 · 01-05-2014, 11:48 PM

Quote:

Originally Posted by Alstann

Im still fully in, waiting patiently. I really do have lots of faith that this will be a great turbo kit, but every week I swing closer to ringing them up and cancelling. I have the funds, abd I want to be turbo'd.

Last week was the last week for me. I am out now just have to wait for the refund.

Dzel · 01-06-2014, 11:34 AM

Did you pay in full? I received mine in I want to say a week and a half but others have been waiting almost a month

Sent with TapAhoe

LIL_G13 · 01-06-2014, 12:04 PM

Yes, paid in full

BlkNismo · 01-06-2014, 12:38 PM

Ever since I bought the Z in 2011 I had plans to go forced induction.
My end goal was to have install/tune done by March 2014. I slowly picked up all the supporting mods through out year 2012 and early 2013 (nice parts pile accumulating in multple closets)
I purchased the gtm kit July 2013. If it gets delivered my March then everything will be right on schedule.

V1H · 01-06-2014, 01:30 PM

Quote:

Originally Posted by conmam

No I have not. I am still building up my savings for this kit. I addition to that, there are SO MANY other things that need to be properly modified in order to reliably accommodate this future 500whp on my Z. Believe me, those costs are at least the same or more than this kit. Got to work hard for this my friend.

can u share your list of mods you plan to do?
I'm still in the process of figuring waht's essential to support this kit (more specifically the due MHI kit).
As far as I understood it lacks an oil cooler but ought to be safe for a stock Z?
Cheers

BlkNismo · 01-06-2014, 02:35 PM

^for starters

32 Row Oil Cooler
Clutch/flywheel/csc
1 step colder spark plugs
Intake plenum gasket
exhaust manifolds gasket
misc fluids
Electronic Boost Controller
downpipes/test pipes
catback
Gauges
Bigger Radiator

V1H · 01-06-2014, 03:40 PM

Ah yes sure, common sense, even to me

Thx m8

The choice of exhaust is still my greatest cause for headache.
Naturally I'd want a 3" catback to maximize turbo efficiency, which I only know the Greddy Turbo Ti-C has. But I don't like its sound. In fact, I haven't yet found a single Z exhaust with the right noise. I've been heavily pampered by ferocious VTEC screams of my nitrous battered Stage2 3/4 Race motor and look for a good race noise for my Z. But working on a £3k Honda is a different matter. I wanna leave my Z engine untouched. And test pipes are no option towards that goal. I got to be able to pass M.O.T. of course.

Cell · 01-06-2014, 04:19 PM

Quote:

Originally Posted by V1H

Ah yes sure, common sense, even to me

Thx m8

The choice of exhaust is still my greatest cause for headache.
Naturally I'd want a 3" catback to maximize turbo efficiency, which I only know the Greddy Ti-C has. But I don't like its sound. In fact, I haven't yet found a single Z exhaust with the right noise. I've been heavily pampered by ferocious VTEC screams and look for real race noise for my Z. But, test pipes are no option towards that goal I got to be able to pass M.O.T. of course.

I believe the Greddy TI-C is 2.75".

Fast intentions makes a 3" exhaust setup.

BlkNismo · 01-06-2014, 04:38 PM

Quote:

Originally Posted by Cell

I believe the Greddy TI-C is 2.75".

Fast intentions makes a 3" exhaust setup.

That is accurate.

I tossed around the idea of running full 3" turbo back, but it being my primary car, i dont think i want all the noise associated. was very close to pulling the trigger on the fast intentions exhaust.

I have since sold the gtm downpipes and have the z1 testpipes and will run oem nismo catback.

Should be sufficient. Dont plan on running more then 7psi with stg 1 gt28's on stock block.

V1H · 01-06-2014, 04:55 PM

Quote:

Originally Posted by Cell

I believe the Greddy TI-C is 2.75".

Fast intentions makes a 3" exhaust setup.

Not quite, the Greddy Turbo Ti-C comes as 3" as featured on Nissan's Project Z car, the non-turbo Ti-C has 2.75".
Would be interesting to 'hear' the 3" F.I. exhaust. It's non-resonated? Though, I only find the 2.5" TDX catback on their web page with a video of the (very quiet) 12" resonator option.

Quote:

Originally Posted by BlkNismo

I have since sold the gtm downpipes and have the z1 testpipes and will run oem nismo catback.

Would you consider the downpipe or test pipe to make more noise? Don't u have emission problems with the TPs?

Mkai0 · 01-06-2014, 06:18 PM

I'm supposed to get my refund today, We'll see..

Mkai0 · 01-06-2014, 07:12 PM

Quote:

Originally Posted by LIL_G13

Yes, paid in full

Good luck man, Let us know how that goes.

TerribleONE · 01-06-2014, 08:53 PM

Quote:

Originally Posted by BlkNismo

That is accurate.

I tossed around the idea of running full 3" turbo back, but it being my primary car, i dont think i want all the noise associated. was very close to pulling the trigger on the fast intentions exhaust.

I have since sold the gtm downpipes and have the z1 testpipes and will run oem nismo catback.

Should be sufficient. Dont plan on running more then 7psi with stg 1 gt28's on stock block.

The turbos really quiet the car down, and if you are still concerned with the noise level you can go with their HFC option that is located in the lead pipes to make it even quieter.

Chuck33079 · 01-06-2014, 09:06 PM

Quote:

Originally Posted by TerribleONE

The turbos really quiet the car down, and if you are still concerned with the noise level you can go with their HFC option that is located in the lead pipes to make it even quieter.

Yep. Between the turbos and the catted 3" FI exhaust, mines pretty quiet at anything other than wot.

01-05-2014, 10:33 PM	#2551 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 14	Im still fully in, waiting patiently. I really do have lots of faith that this will be a great turbo kit, but every week I swing closer to ringing them up and cancelling. I have the funds, abd I want to be turbo'd. __________________ 2012 Pearl White 370Z GReddy Twin Turbo

01-06-2014, 11:34 AM	#2553 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	Did you pay in full? I received mine in I want to say a week and a half but others have been waiting almost a month Sent with TapAhoe Mkai0 likes this. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

01-06-2014, 12:04 PM	#2554 (permalink)
LIL_G13 Base Member Join Date: Oct 2012 Location: Paso Robles Ca Posts: 223 Drives: 2010 Nissan 370z TT Rep Power: 12	Yes, paid in full Mkai0 likes this.

01-06-2014, 12:38 PM	#2555 (permalink)
BlkNismo Track Member Join Date: Sep 2011 Location: USA Posts: 614 Drives: Nismo Rep Power: 14	Ever since I bought the Z in 2011 I had plans to go forced induction. My end goal was to have install/tune done by March 2014. I slowly picked up all the supporting mods through out year 2012 and early 2013 (nice parts pile accumulating in multple closets) I purchased the gtm kit July 2013. If it gets delivered my March then everything will be right on schedule. Dzel and Alkatraz like this.

01-06-2014, 02:35 PM	#2557 (permalink)
BlkNismo Track Member Join Date: Sep 2011 Location: USA Posts: 614 Drives: Nismo Rep Power: 14	^for starters 32 Row Oil Cooler Clutch/flywheel/csc 1 step colder spark plugs Intake plenum gasket exhaust manifolds gasket misc fluids Electronic Boost Controller downpipes/test pipes catback Gauges Bigger Radiator Dzel likes this.

01-06-2014, 03:40 PM	#2558 (permalink)
V1H Base Member Join Date: Dec 2013 Location: United Kingdom Posts: 244 Drives: 2013 370Z-TT GT Edt Rep Power: 3366	Ah yes sure, common sense, even to me Thx m8 The choice of exhaust is still my greatest cause for headache. Naturally I'd want a 3" catback to maximize turbo efficiency, which I only know the Greddy Turbo Ti-C has. But I don't like its sound. In fact, I haven't yet found a single Z exhaust with the right noise. I've been heavily pampered by ferocious VTEC screams of my nitrous battered Stage2 3/4 Race motor and look for a good race noise for my Z. But working on a £3k Honda is a different matter. I wanna leave my Z engine untouched. And test pipes are no option towards that goal. I got to be able to pass M.O.T. of course. Last edited by V1H; 01-07-2014 at 05:01 AM.

01-06-2014, 06:18 PM	#2562 (permalink)
Mkai0 Base Member Join Date: Dec 2010 Location: Somewhere in Texas Posts: 209 Drives: 2008 G35 Sedan Rep Power: 14	I'm supposed to get my refund today, We'll see.. elperuano and COSMO like this. __________________ Eibach, Tanabe, Blitz, Vertini, GTM stage 1.5 SC, Aquamist, Invidia, Alto built 5AT, Edge Racing, Racelogic, GTM driveshaft, 440 whp in 101F TX heat..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 12:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 06:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 03:23 PM