GTM Performance Engineering: MHI Twin Turbo Official Release

KaienZ34 · 03-27-2013, 10:07 AM

blackonorange · 03-27-2013, 11:10 AM

Lol is there a a way I can put a rush on this ?!?!?

Nixlimited · 03-28-2013, 09:45 AM

Dang! How did you lower the tranny by yourself? Impressive anyway!

DEpointfive0 · 03-28-2013, 09:48 AM

Quote:

Originally Posted by Nixlimited

Dang! How did you lower the tranny by yourself? Impressive anyway!

I assume with a jack, lol

Nixlimited · 03-28-2013, 10:57 AM

Quote:

Originally Posted by DEpointfive0

I assume with a jack, lol

Yep, but had to get it on the floor and off the jack somehow...

Sh0velMan · 03-28-2013, 10:59 AM

Quote:

Originally Posted by Nixlimited

Yep, but had to get it on the floor and off the jack somehow...

With your hands?

It weighs less than 200lbs, any adult male should be able to move it 6 inches off of the jack. Just saying.

Nixlimited · 03-28-2013, 11:19 AM

Quote:

Originally Posted by Sh0velMan

With your hands?

It weighs less than 200lbs, any adult male should be able to move it 6 inches off of the jack. Just saying.

Honestly, I have no idea what a transmission weighs. I just assumed it was hundreds of pounds. Anyway, getting way off topic.

BACK TO TURBO TALK!

Cvzg77r · 03-28-2013, 11:34 AM

question if one day, one wanted to upgrade the mitsubishi turbos to the garrett turbos (for the ball bearings n such) would it be possible with this kit? or should i just save up longer for the garrett kit? lol

SAM@GTM · 03-29-2013, 10:52 AM

Quote:

Originally Posted by Cvzg77r

question if one day, one wanted to upgrade the mitsubishi turbos to the garrett turbos (for the ball bearings n such) would it be possible with this kit? or should i just save up longer for the garrett kit? lol

Yes, it will be possible without having to replace anything but the turbos. and actually we can do better than that, The new manifold can also accept the latest T25+ turbine housing from garret that can flow as much as a T3 and comes with a V band turbine housing. will post a pic of GT35R housing that will directly fit to our manifold.

Sam

Nixlimited · 03-29-2013, 04:26 PM

Quote:

Originally Posted by SAM@GTM

Yes, it will be possible without having to replace anything but the turbos. and actually we can do better than that, The new manifold can also accept the latest T25+ turbine housing from garret that can flow as much as a T3 and comes with a V band turbine housing. will post a pic of GT35R housing that will directly fit to our manifold.

Sam

News to me.

Mr.Squeeze · 04-03-2013, 05:13 PM

Quote:

Originally Posted by SAM@GTM

Yes, it will be possible without having to replace anything but the turbos. and actually we can do better than that, The new manifold can also accept the latest T25+ turbine housing from garret that can flow as much as a T3 and comes with a V band turbine housing. will post a pic of GT35R housing that will directly fit to our manifold.

Sam

I am patiently waiting for these T25+ turbo housings and manifold's

Now hurry up

Dzel · 03-28-2013, 12:39 PM

^Good question

cnock · 03-28-2013, 09:34 PM

im assuming the flanges on the exhaust manifold are different between the two. At least when i was into eclipses we were flanged for the g series turbos bt if we wanted to use others it required a new exhaust mani

1slow370 · 03-28-2013, 09:51 PM

or if your beefy you just set on top of you on a good creeper roll under car pick it up and shove it in. my 2 cents on that one since most tranny jacks are crap anyway.

elperuano · 03-28-2013, 09:53 PM

Quote:

Originally Posted by 1slow370

or if your beefy you just set on top of you on a good creeper roll under car pick it up and shove it in. my 2 cents on that one since most tranny jacks are crap anyway.

Now that's a manly way to do it!

03-27-2013, 10:07 AM	#1 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 179	__________________ *"These Violent Delights Have Violent Ends"* http://www.the370z.com/members/kaienz34-albums-z34.html

03-28-2013, 09:45 AM	#3 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 27	Dang! How did you lower the tranny by yourself? Impressive anyway! __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

03-28-2013, 12:39 PM	#12 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 25	^Good question Cvzg77r likes this. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

03-28-2013, 09:51 PM	#14 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7252	or if your beefy you just set on top of you on a good creeper roll under car pick it up and shove it in. my 2 cents on that one since most tranny jacks are crap anyway. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-27-2013, 11:10 AM	#2 (permalink)
blackonorange A True Z Fanatic Join Date: Jul 2011 Location: Saskatchewan Posts: 1,078 Drives: 09 370z Rep Power: 17	Lol is there a a way I can put a rush on this ?!?!?

03-28-2013, 11:34 AM	#8 (permalink)
Cvzg77r Base Member Join Date: May 2012 Location: Rockwall, TX Posts: 117 Drives: 12 NiSSAN 370Z nismo Rep Power: 15	question if one day, one wanted to upgrade the mitsubishi turbos to the garrett turbos (for the ball bearings n such) would it be possible with this kit? or should i just save up longer for the garrett kit? lol

03-28-2013, 09:34 PM	#13 (permalink)
cnock Base Member Join Date: Mar 2013 Location: michigan Posts: 2 Drives: 370z Rep Power: 14	im assuming the flanges on the exhaust manifold are different between the two. At least when i was into eclipses we were flanged for the g series turbos bt if we wanted to use others it required a new exhaust mani

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 12:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 06:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 03:23 PM